Speakerbus iD712 Desk Station User Guide
- June 13, 2024
- Speakerbus
Table of Contents
Quick Start Guide
iD712
Revision 10
MAKING A CALL
- Key Pad – Dial number on keypad OR
- Directories – Press f1 (MENU) • Press 2 (Directories) • Press 1, 2, 3 or 4 for the appropriate directory option • Using ▲ and ▼ highlight the appropriate name and press OK. If you selected option 4 (Location) you will need to select a place location followed by selecting the appropriate name and then press OK. OR
- Call Register – Press f1 (MENU) • Press 3 (Call Register) • Press 1, 2, 3, 4 or 5 for the appropriate call register • Using ▲ and ▼ highlight the appropriate name and number and press OK.
- Speed Dials – Ensure the appropriate speed dial page is displayed • Press the appropriate speed dial key.
RECEIVING A CALL
A received point to point or group call is indicated by an audible beep, and
the screen displaying the caller’s name and dial number. Talk when the call is
connected. The voice path is automatically opened when the call is connected.
ENDING CALLS
Press X.
LAST CONNECTION RE-DIAL
Press f2.
MUTE MICROPHONE DURING CALL
- Press f3 (MUTE MIC).
- Press f3 (UN-MUTE) again to remove mute.
ACTIVATE PRIVACY
- Press f1 (MENU).
- Press 5 (Intercom Privacy).
The privacy icon is displayed in the icon side bar. Repeat above steps to turn
off privacy.
ACCEPT CALL IN PRIVACY MODE
When privacy is enabled the screen displays the name and extension of the
calling party for active incoming calls. The following text is also displayed:
[calling party’s name] [calling party’s extension] Calling. Press OK key to
accept.
Press OK to accept the incoming call.
CALLING AN INTERCOM THAT HAS PRIVACY TURNED ON
When calling an intercom that has privacy turned on, your intercom will
display the following text: [called party’s name] [called party’s extension]
Intercom call.
You will need to wait for the called party to answer before the call is
connected. Press X if the called party does not answer.
DIRECTORIES
The Directory lists are contained within the Directories menu and can be viewed by pressing:
- f1 (MENU).
- Press 2 (Directories).
- Using ▲ and ▼ highlight the appropriate directory and press the OK key.
Directories contain the following options:
- Global – Contains a list of seated and un-seated users.
- Personal – Contains a list of personal users.
- Group Call – Contains a list of groups the user is a member of.
- Location – Contains a list of remote sites.
- Voice Services – Contains a list of voice services the user can use.
- Speed Dials – Contains four speed dial pages
DIRECTORY SEARCH
Each directory within the Directories option contains an alphabetical search
facility. This allows one to quickly locate a contact, remote site or
broadcast.
LISTEN TO A HOOT SERVICE
-
Press f1 (MENU).
-
Press f4 (NEXT>) to display Program.
-
Ensure Select Voice Service is highlighted and press OK.
This displays a list of voice services. -
Using ▲ and ▼ highlight the appropriate voice service and press OK.
TALKING BACK TO A HOOT SERVICE
If it is possible to talk back to a hoot service the screen will display the
following text: Press “T” to talk.
To talk back to a hoot service:
- Press and hold T (where applicable).
MUTE HOOT SERVICE
- Press f3 (MUTE VS).
- Press f3 (UN-MUTE) again to remove mute.
CLEARING A HOOT SERVICE
- Press f1 (MENU).
- Press f4 (NEXT>) to display Program.
- Ensure Clear Voice Service is highlighted and press OK.
GROUP CALL MAKING A GROUP CALL USING KEY PAD
- Dial the number using the key pad.
- If the group call is an Answerback to Owner type (a) make request when call is connected, (b) press the * (star) key when finished making request and (c) and wait for response. OR
If the group call is a Mixing Group Call (Conference) type, talk when call is connected.
MAKING A GROUP CALL USING DIRECTORIES
- Press f1 (MENU) to display Main.
- Press 2 (Directories).
- Press 3 (Group Call).
- Using ▲ and ▼ highlight the appropriate group and press OK.
- If the group call is an Answerback to Owner type (a) make request when call is connected, (b) press the *T ( key when finished making request and (c) wait for response. OR
If the group call is a Mixing Group Call (Conference) type, talk when call is connected.
TALKING ON A GROUP CALL
Talk if you initiated the call or press *T (if applicable) to talk.
RESPOND TO GROUP CALL INITIATOR
- Press the *T key to establish point to point connection.
- Talk when call is connected.
SPEED DIALS
ADDING SPEED DIALS
- If the idle (home) screen is displayed press ▲ or ▼ to display speed dials.
- Ensure the appropriate speed dial page is displayed using ▲ and ▼ if required.
- Select a blank speed dial by pressing the appropriate key pad number key (1 – 8).
- Using ▲ and ▼ highlight and select (using OK) the appropriate directory followed by selecting the required name/group.
REMOVING SPEED DIALS
- Press f1 (MENU).
- Press f4 (NEXT>).
- Press 3 (Speed Dials).
- Press 2 (Delete).
- If required, use ▲ and ▼ to display the appropriate speed dial page.
- Using key pad numbers 1 – 8 press the required speed key.
STATUS ICONS
Please ensure these icons look identical to the icons displayed on the left hand side. If these icons are a different colour to what is displayed, please contact your System Administrator.
iD712 FRONT VIEW ILLUSTRATION
iD712 FRONT VIEW DESCRIPTION
Key | Description | Extended Description |
---|---|---|
1 | Speaker | Single Speaker |
2 | Screen | Displays the status of the unit. |
3 | Fixed Function Keys | f1, f2, f3 & f4 – Soft keys which are fully explained |
in the iD712 Deskstation User Guide.
– (Home Key) Returns unit back to the home screen.
– (Handset Key) Used to activate the handset/headset feature when in a call.
– (i Selector) Used to switched between an active point to point call, hoot
service and/or group call.
– (Back Key) Returns screen back to the previous menu/screen.
– Navigation / Volume keys.
– Select / Return key.
– Clear / Cancel key
4| Key Pad| The key pad consists of the following:
● 0 – 9 – Used for dialling and name searching.
● – Used to force deskstation to transmit speech or switch between the
different character case.
● – Used to switch between characters and numbers.
5| Open MicrophoneLED Icons| Two LED indicators that are lit solid green when
open microphone is active. The indicators are lit solid red when the
microphone is muted.
6| Open Microphone| Allows one to speak in a hands free manner.
7| Illuminating LEDs| Includes a variety of icons which are fully explained in
the iD712 Deskstation User Guide.
Published Date: 29 July 2022
Guide Reference: QS712/R10
speakerbus.com
© Speakerbus Technology Limited 2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>