COSTWAY HW69449 Folding Camp Bed User Manual

COSTWAY HW69449 Folding Camp Bed

Before You Start

• Please read all instructions carefully.
• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Always place the product on a flat, steady, and stable surface.
• Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE

• If you’re having difficulty, our friendly customer team is always here to help.

ASSEMBLY INSTRUCTIONS

• Do not jump on the folding bed
• Do not sit on the edges
• Do not stand up on the folding bed

1. Extended center legs
2. The crossbar must be positioned between the caster and leg flat side facing up.

• Carefully remove all packaging.

• Unfold the bed and remove the hardware pack.

  1. Close bed and secure with clip lock bar (item A) Fig 1 see illustration.

  2. Place the folded bed on its side and extend the two center legs. Fig 2.

  3. Place the flat side of the leg crossbar (item B) across the center legs aligning the holes of the crossbar with the underside legs Fig 3, insert caster (item C) up through the crossbar and THEN leg. Secure with nut and tighten with a spanner (item D) repeat for the remaining 3 casters.

  4. 

  5. Release the snap-click lock bar, and carefully unfold one side of the bed until the leg retention bar hole aligns with the corresponding extended outer leg hole Fig 4.

  6. Secure with nut and bolt (item F) and spanner (item D). repeat for the opposite side. This process enables the automatic leg action.
     Please note bed must be partially unfolded for the holes to align.

  7. Stand the bed upright and attach the 4 plastic caps by inserting them into the pre-drilled holes in each outer leg (item E) Fig 5.

  8. Handles must be held firmly when operating to prevent the bed from opening too rapidly. To operate the bed, hold both handles firmly, and release the clip lock bar (item A). Gently lower one side to the floor and repeat for the opposite side. To close simply fold and secure with a clip lock bar. Please do not place your hands near the hinges when operating the bed. Recommended maximum weight 120 kgs 264lbs

Return / Damage Claim Instructions

• DO NOT discard the box / original packaging.
  In case a return is required, the item must be returned in the original box. Without this your return will not be accepted.

• Take a photo of the box markings.
  A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.

• Take a photo of the damaged part (if applicable).
  A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.

• Send us an email with the images requested.
  Email us directly from the marketplace where your item was purchased with the attached images and a description of your claim.

  • USA office: Fontana
  • AUS office: Truganina
  • GBR office: Ipswich
  • USA:cs.us@costway.com
  • AUS:cs.au@costway.com
  • GBR:cs.uk@costway.com

If you’re having difficulty, our friendly customer team is always here to help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>