TOSHIBA TSR75 Tabletop Instant Hot Water User Guide

TOSHIBA TSR75 Tabletop Instant Hot Water

Product Information

Product Name: TWP-TSR75SHK(W) TWP-TSR75SHK(M)

Quick Start Guide

First use instruction

Product Usage Instructions

First Use:

1. Open the package and place the product on a level table.
2. Install the water tray.
3. To take out the water tank, follow these steps:
4. Remove the water tank cover.
5. Lift the handle of the water tank and pull it out from the base.
6. Disconnect the water tank from the base and lift it out completely.
7. Fill water:
   • Add tap water to the raw water tank (the larger one).
8. Install the water tank:
9. Align the water tank with the socket on the base and press i  down.
10. After pressing the water tank tightly, push it to the side of the machine body.
11. Install the water tank cover.
12. After completing the water preparation, empty the internal water tank to clean the internal pipeline:
    • In standby state, hold the “Ambient Water” and “Formula Milk” buttons simultaneously.
    • Press the “Ambient Water” button or wait for 3 minutes after draining out water to automatically exit the repeated operation 3-5 times.

Taking Water:

1. Click any icon to light up the screen. The screen activation time is 3 minutes.
2. Ambient water:
   • After the screen is on, the temperature is automatically selected as Ambient water.
   • Click the Water Outlet button to discharge the water.
3. Other options:
   • Select the desired temperature.
   • Press the Water Outlet button to take water.

Water Production Process:

If the Water Shortage indicator is on during the water production process, refill the tank with tap water and repeat the above steps.

First use instruction
When using for the first time, it is specially stated that you need to feed water twice, and it takes about 7 minutes to produce water.

1. Open the package, place it on the level table, and install the water tray.
2. Steps of taking out the water tank
3. Remove the water tank cover;
4. Lift the handle of the water tank and pull the water tank out, and then lift it out after it is disconnected from the base
5. Fill water:Add tap water to the raw water tank (the larger one).
6. Install the water tank
7. Align the water tank with the socket on the base and press it down;
8. After the water tank is pressed tightly, push the water tank to the side of the machine body;
9. Install the water tank cover, at this time, the top of the water tank cover
10. Start to produce water: During the water production process, if the “Water Shortage” indicator is on, tank with tap water, and repeat the above steps.
11. After the completion of water preparation, the internal pipeline is cleaned by emptying the internal water tank.Internal emptying: In the standby state, hold the ” Ambient Water ” and ” Formula Milk ” buttons at the same time Press the Ambient water button or wait for 3 minutes after draining out water, it will automatically exit the repeated operation 3-5 times.
12. When first use the machine, after filling water in raw water tank, water purifier will repeat the above procedures until the purified water tank is full. That is normal. If there is fully filled purified water tank, machine will enter the standby state

Take water：

1.  Click any icon to light up the screen, the screen activation time is 3 mins.
2.  Ambient waterAfter the screen is on, the temperature is automatically selected as Ambient water, click the Water Outlet button to discharge the water.
3.  Other optionsSelect the corresponding temperature, and press the Water Outlet button to take water.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>