ZYXEL T0DX3301 Dual Band Wireless AX1800 VDSL2 Gigabit User Guide

ZYXEL T0DX3301 Dual Band Wireless AX1800 VDSL2 Gigabit User Guide

Package Contents

• Zyxel Device

• Power Cable

• Ethernet Cable

• Phone Cable (DX3301-TO/ DX3300-TO only

• Quick Start Guide

• Declaration of Conformity Safety Warnings

Support Information

https://service-provider.zyxel.com/global/en/tech-support

See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.

EU Importer
Zyxel Communications A/S Gladsaxevej 378, 2. th. 2860 Søborg, Denmark.
https://www.zyxel.com/dk/da/

‘UK Importer
Zyxel Communications UK Ltd.
2 Old Row Court, Rose Street, Wokingham, RG40 1XZ, United Kingdom (UK)
https://www.zyxel.com/uk/en/

US Importer
Zyxel Communications, Inc.
1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/

Hardware Connection

| DSL| PHONE| WAN| LANX4| USB| 2.4G/5G WiFi
---|---|---|---|---|---|---
DX3301-T0| v| v| v| | v| v
EX3301-TO| X| v| v| | v| v
DX3300-T0| v| | v| | v| x
EX3300-TO| X| | v| | v| x

Use the gray phone cable to connect the DSL port to a DSL splitter or directly to the  telephone wall outlet.

1. Use an Ethernet cable to connect the WAN port to a gateway modem.
   

2. Connect a computer to the LAN port using the yellow Ethernet cable (optional).

3. Connect the power cable to the Zyxel Device and press the power button.

INTERNET| Green On – Internet is ready. e Blinking – The Zyxel Device is transmitting/receiving Internet datalRed On – The Zyxel Device attempted to get an IP address, but failed —- Off – Internet is not ready.
---|---

POWER| Green On – Power is on. Q) Blinking – The Zyxel Device is starting up. POWER Red On-Thereis a malfunction Blinking – The Zyxel Device is upgrading firmware.

WiFi Connection

Using ssID

Use the SSID and Wireless key on the device label to connect wirelessly to the Zyxel Device. On your smartphone or notebook, find this SSID. Enter the Wireless key to connect,

Using WPS

Press the WPS button until the WiFi 2.4G and 5G LEDs light up in amber. Press the WPS button on the client. If the WPS method fails, use the SSID and wireless key to set up a WiFi connection (2-a)

Quick Start Wizard

Open a web browser and go to http://192168.1.1. Enter the default User name (admin) and admin Login Password (on the device label), and then click Login. The Wizard runs. Follow the Wizard prompts to complete the setup.

Wall Mounting (Optional)

optional

1. Drill two holes on the wall at the distance of 110 mm
   

2. Insert screw anchors and screws (not provided) into the holes.
   

3. Place the Zyxel Device so the wall mount holes line up with the screws. Slide the Zyxel Device down gently to fix it into place.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>