ZYXEL 5401 Series Dual-Band Wireless User Guide
- June 13, 2024
- ZYXEL
Table of Contents
ZYXEL 5401 Series Dual-Band Wireless User Guide
Package Contents
-
Device
-
Power Cable
-
Ethernet Cable
-
Phone Cable (for DX5401)
-
Quick Start Guide
-
Declaration of Conformity Safety Warnings
-
Bracket
-
Device Stand
Mounting KIT
-
x2 Screw Anchors
-
x2 Tpping Screws
Hardware Connections
Step 1
| DSL| FXS| WAN| LAN X4| USB| 2.40/50 WWI|
SFP| FXS LED
---|---|---|---|---|---|---|---|---
DX5401-Bx| 0| 0| 0| 0| 0| 0| 0| 0
EX5401-Bx| 0| 0| 0| 0| 0| 0| 0| 0
Note: Please follow your SFP transceiver’s installation instructions.
INTERNET| Green
On-Internet is ready
Off-Internet is not ready.
---|---
POWER| Green
On-Power is on
Blinking – Starting up.
Red
On-Malfunctioning.
Blinking – Upgrading firmware.
-
A) Use the gray phone cable to connect the DSL port to a DSL splitter or directly to the telephone wall outlet.
OR
B) Use an Ethernet cable to connect the WAN port to a gateway modem.
OR
C) Use the SFP port with an SFP transceiver for WAN connection. -
Connect a computer to the LAN port using the yellow Ethernet cable (optional).
-
Connect the power cable to the Zyxel Device and press the power button.
Step 2
Using SSID
ZYXEL
SSID: Zyxel_XXXX
Wireless key: Xxxx
Username: admin
Login Password: XXXXXXX
Scan the QR code on the device label to see the SSID and Wireless Key on your mobile device
The SSID and Wireless Key are on the device label.
On your smartphone or notebook, find this SSID. Enter the Wireless Key to
connect
Using WPS
| Amber
Blinking – The Zyxel Device is connecting to 2.4 GHz WiFi client via WPS.
Green
On-2.4 GHz WiFi is ready.
---|---
| Amber
Blinking – The Zyxel Device is connecting to 5 GHz WiFi client via WPS.
Green
On-5 GHz WiFi is ready.
Press the WPS button until the WiFi 2.4G and 5G LEDs light up in amber.
Press the WPS button on the client. If the WPS method fails, perform the Using
SSID method.
Quick Start Wizard
ZYXEL
User name: admin
Login Password: XXXXXXXX
Open a web browser and go to http://192.168.1.1. Enter the default Username (admin) and admin login password (on the device label), and then click Login. A wizard runs. Follow the wizard prompts to complete the setup.
Device Stand Installation
Connect the stand to the Zyxel Device.
Note: Do not remove the stand after installation.
Wall Mounting
(Optional)
-
Drill two holes at the distance of 130 mm apart
-
Insert screw anchors and screws into the holes.
-
Attach the bracket to your Zyxel Device with the bracket holes facing down.
-
Hang it on the screws.
Support Information
Scane by QR Code
https://service-provider.zyxel.com/global/en/tech-support
See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th, 2860
Sebarg, Denmark
https://www.zyxel.com/dk/da/
UK Importer
Zyxel Communications UK Ltd.
2 Old Row Court, Rose Street, Wokingham
RG40 1XZ, United Kingdom (UK)
https://www.zyxel.com/uk/en/
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim
CA 92806-2001
https://www.zyxel.com/us/en/
Copyright© 2023 Zyxel and/or its affiliates. All Rights Reserved.