KURYAKYN 3274 Omni Transmission Covers Installation Guide
- June 13, 2024
- KURYAKYN
Table of Contents
INSTALLATION INSTRUCTIONS
OMNI TRANSMISSION COVERS FOR GL1800
3274 Omni Transmission Covers
3274 CHROME OR 3275 SATIN BLACK
THANK YOU FOR CHOOSING KURYAKYN!
Protect yourself and others from possible injury and property damage or
loss. Pay close attention to all instructions, warnings, cautions, and notices
regarding the installation, use, and care of this product.
WARNING
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED
HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
CAUTION
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED
HEREIN CAN RESULT IN MINOR OR MODERATE POTENTIAL INJURY.
NOTICE
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED
HEREIN MAY NEGATIVELY AFFECT PRODUCT PERFORMANCE AND FUNCTIONALITY OR DAMAGE
THE PRODUCT ITSELF OR THE PRODUCT TO WHICH IT IS BEING ATTACHED.
ENSURE THAT THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:
1 Left Cover (clutch side)
1 Right Cover (brake side)
1 Grommet
YOU WILL ALSO NEED:
Metric hex wrench set, clean rag and warm soapy water
NOTICE
THESE INSTALLATION INSTRUCTIONS CONTAIN IMPORTANT INFORMATION. ENSURE THE END
USER RECEIVES THIS COPY AND IS AWARE OF ITS IMPORTANCE FOR FUTURE USE.
STEP 1 Read and understand all steps in the instructions before starting
the installation. Park the motorcycle on a hard, level surface and turn off
the ignition. Let motorcycle cool.
STEP 2 Refer to PIC 2. On the brake side, remove existing cover located
behind the rear master cylinder. Set mounting hardware aside, it will be
reused. NOTICE
ENSURE PROPER ADHESION OF THIS PRODUCT. REMOVE ALL GREASE, OIL, BUGS, DIRT,
AND OTHER DEBRIS (INCLUDING WAX AND POLISH) FROM THE INSTALLATION AREA.
KURYAKYN WILL NOT PROVIDE WARRANTY COVERAGE ON PRODUCTS OR COMPONENTS LOST OR
DAMAGED DUE TO IMPROPER INSTALLATION.
DO NOT ATTEMPT THIS INSTALLATION IN TEMPERATURES BELOW 50°F (10°C). PROPER
ADHESIVE BONDING ONLY OCCURS ABOVE 50°F (10°C).
STEP 3 Refer to PIC 2. Locate provided grommet. Place grommet in open
mounting hole.
STEP 4 Refer to PIC 3 and 4. Locate provided Right Cover (brake side) and
the OEM hardware that was removed in Step 2. Use your fingernail to rub the
adhesive backing; this will activate the adhesive. Remove and discard the
backing. Place the OEM screw in the mounting hole located on the backside of
the cover. From the front side of the cover, insert a hex wrench through the
grate to hold the screw in place. Align and snap the Left Cover into place.
Fasten the OEM screw and press on the adhesive section.
STEP 5 Refer to PIC 5. On the clutch side, remove existing cover.
STEP 6 Refer to PIC 5 and 6. Locate provided Left Cover (clutch side).
Align and snap into place the cover.
NOTICE
IT IS THE INSTALLER’S RESPONSIBILITY TO ENSURE THAT ALL OF THE FASTENERS
(INCLUDING PRE-ASSEMBLED) ARE TIGHTENED BEFORE OPERATION OF THE MOTORCYCLE.
KURYAKYN WILL NOT PROVIDE WARRANTY COVERAGE ON PRODUCTS OR COMPONENTS LOST DUE
TO IMPROPER INSTALLATION OR LACK OF MAINTENANCE. PERIODIC INSPECTION AND
MAINTENANCE ARE REQUIRED ON ALL FASTENERS.
LIMITED WARRANTY
Kuryakyn warrants that any Kuryakyn products sold hereunder, shall be free of defects in materials & workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:
- Kuryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).
- The product must be properly installed, maintained & operated under normal conditions.
- Kuryakyn shall not be liable for any consequential & incidental damages, including labor & paint, resulting from failure of a Kuryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breach of contract or duty between Kuryakyn & a customer.
- Kuryakyn products are often intended for use in specific applications. Kuryakyn makes no warranty if a Kuryakyn product is used in applications other than intended.
- Kuryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. L.E.D.’s contained in components of Kuryakyn products will be warranted for defects in materials & workmanship for 3 years from the date of purchase whereas all other components shall be warranted for one (1) year.
- All warranty claims must be directed to the place of purchase. Merchandise sold through internet auction sites or any other unauthorized reseller shall not carry a Kuryakyn warranty. If unsure, please contact the place of purchase to verify they are an authorized Kuryakyn reseller.
RETURN POLICY
Merchandise determined to be defective may be returned up to one year from the
date of purchase. Returns must be processed through original seller. Returned
merchandise for any other reason other than warranty claims must be in like
new condition & subject to a 20% restocking fee. All returns are subject to
inspection for determination of full or partial credit. Any returned part that
shows evidence of being used or installed contrary to manufacturer’s
instructions, &/or subjected to improper handling, packaging or return
shipping by the customer, will not be eligible for exchange, refund or
warranty consideration. All returned electrical items will be inspected &
tested. If electrical item is deemed functional, no credit will be issued &
item will be returned. All sales are final on discontinued or closeout
merchandise.
©2015 KURYAKYN HOLDINGS, LLC ALL RIGHTS RESERVED
KURYAKYN, KURYAKYN K logo and the marks appearing on this instruction sheet
are registered and common law trademarks of Kuryakyn Holdings except noted
third-party trademarks. A full listing of trademarks and trademark
registrations owned by Kuryakyn Holdings can be found at www.kuryakyn.com
/legal-notice.
Emissions Notice: The California Air Resources Board (CARB) does not permit
the use of aftermarket emission-related parts(s) that alter the performance of
OEM emission-related devices unless CARB has issued an Executive Order, other
than on racing vehicles on closed courses. Check your local laws and
manufacturer’s information.
Listed Manufacturers and product model names are for reference only. All
product and company names are trademarks or registered trademarks of their
respective holders. Use of them does not imply any affiliation with or
endorsement by them. All specifications are subject to change without notice.
For additional information on third-party product and company names, please
consult our Web page at www.kuryakyn.com/legal-
notice
303274
DPF-MRK-003 REV A 1/29/20
KURYAKYN.COM
866 277 9598
INFO@KURYAKYN.COM
454 COUNTY ROAD VV SOMERSET, WI 54025
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>