KURYAKYN 6238 Grip End Weights Installation Guide
- June 13, 2024
- KURYAKYN
Table of Contents
KURYAKYN 6238 Grip End Weights
Product Information
The Kuryakyn Grip End Weights 6238 are designed to fit all Kuryakyn ISO-Grips Flame Grips and Transformer Grips. These grip end weights are compatible with ISO grips for GL1800 with heated grips (Kuryakyn P/N 6183), but proper installation requires smooth accent rings (P/N 6264-6266), which are sold separately. The package includes 2 bar end weights, 1 hardware kit for stiletto end, and installation instructions.
Product Usage Instructions
- Before starting the installation, read and understand all steps in the instructions.
- Park the motorcycle on a hard, level surface. Turn off the ignition and allow the engine to cool.
- Remove the four socket head cap screws on the end cap from your already installed Kuryakyn grip. Keep the trim ring because you will reuse it.
- Place the trim ring on the new bar end weight and place it onto the grip. Secure it with four 4 40 x 9/16 Socket Head Cap Screws.
- Repeat steps 2 and 3 for the opposite side installation.
Note: The other eight (8) 4 40 x 3/4 Socket Head Cap Screws are meant to be used when installing the new bar end weights with Kuryakyn throttle bosses. If you have any installation questions or need customer service, you can contact Kuryakyn at 877.370.3604 (toll-free) or email techsupport@kuryakyn.com. For warranty information, refer to the limited warranty provided with the product. Remember to strictly observe the guidelines mentioned in the instructions to use the product properly and avoid potentially dangerous accidents.
Ride On!
KURYAKYN GRIP END WEIGHTS
FITS: ALL KURYAKYN ISO-GRIPS-FLAME GRIPS, & TRANSFORMER GRIPS
(FOR USE WITH ISO GRIPS FOR GL1800 WITH HEATED GRIPS (KURYAKYN P/N 6183)
REQUIRES SMOOTH ACCENT RINGS (P/N 6264-6266) FOR PROPER INSTALLATION-SOLD
SEPARATELY)
PARTS INCLUDED
- 2 Bar End Weights
- 1 Hardware Kit for Stiletto End
- 8 4-40 x 9/16 Socket Head Cap Screw
- 8 4-40 x 3/4 Socket Head Cap Screw
- 1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KÜRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR PROPERTY DAMAGE
OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS
AND ATTENTION NOTES REGARDING THE USE AND CARE OF THIS PRODUCT.
WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
CAUTION! This indication alerts you to the fact that ignoring the contents described herein can result in potential injury or material damage.
ATTENTION! This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality.
TOOLS SUGGESTED
Set of hex wrenches
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE PRODUCT PROPERLY
AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
PROCEDURE
- STEP 1 Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface; turn off the ignition and allow the engine to cool.
- STEP 2 Remove the four-socket head cap screws on the end cap from your all ready-installed Kuryakyn grip. Keep the trim ring because you will reuse it.
- STEP 3 Place the trim ring on the new bar end weight and place it on to the grip. Secure it with four 4-40 x 9/16 Socket Head Cap Screw.
- STEP 4 Repeat steps 2 and 3 for opposite side installation.
NOTE The other (8) 4-40 x 3/4 Socket Head Cap Screws are meant to be used when you are installing the new bar end weights with the Kuryakyn throttle bosses.
CUSTOMER SERVICE 877.370.3604 (toll free)
INSTALLATION QUESTIONS techsupport@kuryakyn.com or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:
- Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).
- The product must be properly installed, maintained and operated under normal conditions.
- Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.
- Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of con-tract or duty between Küryakyn and a customer.
- Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
- Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. Components of Küryakyn products containing L.E.D.s will be warranted for defects in materials and workmanship for 3 years from the date of purchase.
- Küryakyn makes no warranty of any kind in regard to other manufacturer’s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer,
but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You’ll find all our innovations for H-D, GL and Metric Cruisers in our annual
catalogs. Order online today–select the ”CATALOGS” icon. Each Küryakyn®
product comes with a Proof-of-Purchase good for a complimentary catalog.
Details in packaging.
Be sure to ask your local dealer about other Küryakyn® products, the
motorcycle parts and accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>