KURYAKYN 3747 Chrome Handlebar Top Covers Installation Guide
- June 13, 2024
- KURYAKYN
Table of Contents
KURYAKYN 3747 Chrome Handlebar Top Covers
Product Information
The product is Chrome Handlebar Top Covers. It includes 2 Handlebar Top Covers, 2 Alcohol Pads, and 1 Installation Instructions. The purpose of the product is to enhance the appearance of the handlebars on a motorcycle.
The product is designed to be durable and provide a secure fit on the handlebars. It has adhesive backing to ensure a strong bond once installed. The covers are made of chrome material, giving thema shiny and polished look.
PARTS INCLUDED
- Handlebar Top Covers
- Alcohol Pad
- Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KÜRYAKYN
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING THE USE AND CARE OF THIS PRODUCT.
WARNING! THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
ATTENTION This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality.
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
PROCEDURE
Step 1: Before starting the installation, read and understand all steps in the instructions. Park the motorcycle on a hard, level surface. Turn off the ignition and allow the engine to cool.
Step 2: Test fit the handlebar covers to the handlebars as shown in PIC
Step 3: Clean the handlebars thoroughly. If the area is extremely dirty, clean with warm soap and water. Make surethe area is rinsed and dried completely. Wipe each handlebar with the included alcohol pad and dry completely with a clean cloth.
Step 4: Rub the tape backing on the handlebar top covers to activate the adhesive. Remove the tape backing and apply the covers as desired.
Step 5: Press and hold the covers in place for one minute. Full bonding strength will occur in 24 hours.
After following these steps, the Chrome Handlebar Top Covers will be properly installed on the motorcycle’s handlebars, enhancing its appearance.
If you have any installation questions or need further assistance, you can contact customer service at 877.370.3604 (toll-free) or email techsupport@kuryakyn.com.
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
techsupport@kuryakyn.com or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:
- Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).
- The product must be properly installed, maintained and operated under normal conditions.
- Küryakyn makes no warranty, expressed or Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.
- Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn and a customer.
- Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
- Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. L.E.D.’S contained in components of Küryakyn products will be warranted for defects in materials and workmanship for 3 years from the date of purchase where as all other components shall be warranted for one(1) year. This includes, but is not limited to; control modules, wiring, chrome & other components.
- Küryakyn makes no warranty of any kind in regard to other manufacturer¹s products all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
-
For purchasing Küryakyn® products, you can receive a complete catalog free of charge. Send the Proof-of-Purchase below with your address to: Küryakyn, P.O. Box 339, Somerset, WI 54025.
Please indicate either Accessories Catalog for Harley-Davidson® or GL & Metric Cruisers. -
Be sure to ask your local dealer about other Küryakyn® products, the motorcycle parts and accessories designed for riders by riders.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>