KURYAKYN GL 1800 4328 Comfort Drop Mounts Mini Boards Installation Guide
- June 13, 2024
- KURYAKYN
Table of Contents
KURYAKYN GL 1800 4328 Comfort Drop Mounts Mini Boards
Product Information
- Product Name: Comfort Drop Mounts/Mini Boards for GL 1800 4328
- Manufacturer: Kuryakyn
- Included Parts:
- 1 Right Mini Board and Comfort Drop Mount
- 1 Left Mini Board and Comfort Drop Mount
- 1 Hardware Kit containing:
- 2 Cotter Pins
- 1 Installation Instructions
Product Usage Instructions
-
Step 1: Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface and turn off the ignition. Let cool.
WARNING: You will be working around the engine and exhaust system during installation. Ensure that the engine and exhaust system have fully cooled to prevent injury. -
Step 2: Determine the left from the right (sitting on bike) Drop Mount. The taller, sharp corner lip goes towards the front of the bike.
-
Step 3: Remove the stock pegs from the OEM mounts by removing the cotter pin and washer from the bottom of the mounting pin. Carefully remove the pin, watching how the spring is connected to the peg and the hole in the mount. Keep all these parts except
the cotter pin, as they will be reused. -
Step 4: Reconnect the new Comfort Drop Mount and Mini Board to the mount, making sure that the spring is in the proper position. Drop the mounting pin back into position and secure with the OEM washer and included cotter pin. Check to make sure that your peg pivots up freely.
For any installation questions, please contact Kuryakyn Customer Service at 877.370.3604 (toll-free) or email techsupport@kuryakyn.com .
INSTALLATION
COMFORT DROP MOUNTS/MINI BOARDS for GL 1800 4328
PARTS INCLUDED
- 1 Right Mini Board and Comfort Drop Mount
- 1 Left Mini Board and Comfort Drop Mount
- 1 Hardware Kit Containing:
- 2 Cotter Pins
- 1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KϋRYAKYN!
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR PROPERTY DAMAGE
OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL INSTRUCTIONS, WARNINGS, CAUTIONS
AND NOTICES REGARDING THE USE AND CARE OF THIS PRODUCT.
- Warning: THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
- Notice: This indication alerts you to the fact that ignoring the contents described herein may negatively affect product performance and functionality.
IF INSTALLING THIS PRODUCT FOR ANOTHER PARTY, PLEASE MAKE SURE THEY RECEIVE THIS COPY OF THE INSTALLATION INSTRUCTIONS SO THEY ARE AWARE OF THE IMPORTANT INFORMATION CONTAINED IN THEM.
TOOLS SUGGESTED
Needle Nose Pliers, Set of Hex Wrenches
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
-
STEP 1 Read and understand all steps in the instructions before starting the installation. Park the motorcycle on a hard, level surface and turn off the ignition. let cool.
Warning: YOU WILL BE WORKING AROUND THE ENGINE AND EXHAUST SYSTEM DURING INSTALLATION. ENSURE THAT THE ENGINE AND EXHAUST SYSTEM HAVE FULLY COOLED TO PREVENT INJURY. -
STEP 2 Determine the left from the right (sitting on bike) Drop Mount. PIC 1 The taller, sharp corner lip
goes towards the front of the bike.
-
STEP 3 Remove the stock pegs from the OEM mounts by removing the cotter pin and washer from the bottom of the mounting pin. PIC 2 Carefully remove the pin, watching how the spring is connected to the peg and the hole in the mount. PIC 3 Keep all these parts except the cotter pin, they will be reused.
-
STEP 4 Reconnect the new Comfort Drop Mount and Mini Board to the mount, making sure that the spring is in the proper position. Drop the mounting pin back into position and secure with the OEM washer and included cotter pin. PIC 4 Check to make sure that your peg pivots up freely.
-
Warning: FOOTPEGS MUST BE INSTALLED SO THEY WILL FOLD UPWARD IF HIT BY ANY OBJECT. FAILURE TO ADJUST THE FOOTPEGS TO OPERATE IN THIS MANNER COULD RESULT IN SERIOUS INJURY OR DEATH.
-
DO NOT USE THE REARWARD MOUNTING HOLE IN THE MINI BOARDS. USING THIS POSITION WILL MOVE THE BOARD TOO FAR FORWARD AND MAY ALLOW YOUR FOOT TO BECOME LODGED BETWEEN THE BOARD AND THE SHIFT LEVER. THIS MAY CAUSE LOSS OF CONTROL RESULTING IN SERIOUS INJURY OR DEATH.
-
STEP 5 To change the position of the Mini Board rearward, remove the socket head cap screw that attaches the Mini Board to the splined adapter. PIC 5 Insert the socket head cap screw into the forward hole on the Mini Board and thread it into the splined adapter. Make sure the splines on the Mini Board are engaged on the splines on the adapter in the desired position and tighten securely.
-
STEP 6 To change the tip-up or tip-down position of the Mini Boards, loosen the socket head cap screw far enough to allow the splines on the Mini Board and adapter to disengage. Move the Mini Board to the desired position, and making sure the splines on the board and adapter are engaged in that position, tighten the socket head Cap Screw Securely .
- NOTE: If the Mini Boards do not seem parallel after tightening in the desired orientation, they can be fine tuned by loosening the two footpad mount fasteners and rotating the peg mount forward or backward to achieve the desire position PIC. 6
- Warning: IT IS THE INSTALLERS RESPONSIBILITY TO ENSURE THERE IS SUFFICIENT CORNERING CLEARANCE BEFORE THE MOTORCYCLE IS RIDDEN. INSUFFICIENT CORNERING CLEARANCE MAY CAUSE LOSS OF CONTROL RESULTING IN SERIOUS INJURY OR DEATH.
- Notice: It is the installer’s responsibility to ensure that all of the fasteners (including pre-assembled) are tightened PIC 6 before operation of the motorcycle.
Küryakyn will not provide warranty coverage on products or components lost due to improper installation or lack of maintenance. Periodic inspection and maintenance are required on all fasteners.
Ride On!
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
techsupport@kuryakyn.com or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1)year from the date of purchase by the consumer excepting the following provisions:
- Küryakyn shall have no obligation in the event the customer is unable to provide a receipts owing the date the customer purchased the product(s).
- The product must be properly installed, maintained and operated under normal conditions.
- Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.
- Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn and a customer.
- Küryakyn products are often intended for use unspecific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
- Küryakyn electrical products are warranted forgone (1) year from the date of purchase by the consumer. L.E.D.’S contained in components of Küryakyn products will be warranted for defecting materials and workmanship for 3 years from the date of purchase where as all other components shall be warranted for one(1) year. This includes, but is not limited to; control modules, wiring, chrome & other components.
- Küryakyn makes no warranty of any kind IN regard to other manufacturer¹s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you can receive a complete catalog free of
charge. Send the Proof-of-Purchase below with your address to: Küryakyn, P.O.
Box 339, Somerset, WI 54025. Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers. Be sure to ask your local dealer
about other Küryakyn® products, the motorcycle parts and accessories designed
for riders by riders.
©2005 Küryakyn USA® All Rights reserved. COMFORT DROP MOUNTS/MINI BOARDS INSTALLATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>