Kuryakyn 6242 Extended ISO Throttle Boss Instruction Manual
- June 13, 2024
- KURYAKYN
Table of Contents
EXTENDED ISOTM-THROTTLE BOSSTM 6242
INSTALLATION
6242 Extended ISO Throttle Boss
FITS: ALL KURYAKYN ISO-GRIPS AND ISO-FLAME GRIPS INCLUDING P/N 6183 FOR GL1800, (1/4″ LONGER THAN STANDARD ISO-THROTTLE BOSS)
PARTS INCLUDED
- 1 Extended ISO—Throttle Boss
- 4 4-40 x 9/16″ Socket Head Cap Screw (SHCS)
- 1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING KURYAKYN!
NOTE
It is the installers’ responsibility to make sure all fasteners (including
pre-assembled) are tightened before operation of motorcycle. Kuiryakyn will
not warranty components that are lost due to improper installation. Periodic
maintenance may be required.
TOOLS SUGGESTED
3/32″ Allen Wrench
PROCEDURE
STEP 1 Remove the end cap from the ISO-Grip.
STEP 2 Place the Extended ISO-Throttle Boss between the grip body, and
the trim ring.
Loosely re-install the end cap with the Extended ISO-Throttle-Boss in place,
using the included longer socket head screws.
STEP 3 Position the Extended ISO-Throttle Boss where it will be the most
comfortable for you at cruising speeds.
STEP 4 Tighten the mounting screws
Ride On!
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
[email protected]
or call 715.247.2983
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials and workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:
-
Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).
-
The product must be properly installed, maintained and operated under normal conditions.
-
Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.
-
Küryakyn shall not be liable for any consequential and incidental damages, including labor and paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn and a customer.
-
Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.
-
Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s will be warranted for defects in materials and workmanship for 3 years from the date of purchase. -
Küryakyn makes no warranty of any kind in regard to other manufacturer’s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer and where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You’ll find all our innovations for H-D, GL and Metric Cruisers in our annual
catalogs. Order online today–select the ”CATALOGS” icon. Each Küryakyn®
product comes with a Proof-of-Purchase good for a complimentary catalog.
Details in packaging.
Be sure to ask your local dealer about other Küryakyn products, the motorcycle
parts and accessories designed for riders by riders.
©2005 Küryakyn USA
All Rights reserved.
6242-11HD-0307
kuryakyn.com