CHAUVET DJ COLORband PiX-M ILS RGB LED Moving Strip Light User Guide

CHAUVET DJ COLORband PiX-M ILS RGB LED Moving Strip Light

Product Information

Operation is subject to the following two conditions: 1. This
device may not cause harmful interference, and 2. This device must
accept any interference received, including interference that may
cause undesired operation.
Included Items| Power cable, Hanging bracket, Quick Reference Guide
ILS Connection| The COLORband PiX M ILS uses the DMX data connection and the
D-Fi USB for wireless connection to the Integrated Lighting System
(ILS) ecosystem (patent pending). For more information about
configuring the COLORband PiX M ILS into ILS mode, please refer to
the User Manual available at www.chauvetdj.com.

Product Usage Instructions

1. Read the Safety Notes in the User Manual before installation, use, and maintenance of COLORband PiX M ILS.
2. In case of a serious operating problem, stop using the product immediately.
3. Place the product on a non-flammable surface.
4. Ensure FCC compliance by not causing harmful interference and accepting any interference received.
5. Refer to the Control Panel Description in the User Manual for button functions.
6. To connect the COLORband PiX M ILS to the Integrated Lighting System (ILS), use the DMX data connection and the D-Fi USB. For detailed instructions, refer to the User Manual available at www.chauvetdj.com.

Safety Notes

These Safety Notes include important information about installation, use, and maintenance of COLORband PiX M ILS.

ALWAYS

• Connect to a grounded circuit.
• Connect to operating voltages as specified on the product’s spec sticker.
• Disconnect from power before replacing the fuse.
• Disconnect from its power source during periods of inactivity.
• Use a safety cable when suspending overhead.
• Heed all restrictions and warnings on the spec sticker.
• Mount in a location with at least 20 in (50 cm) of ventilation.
• Replace the fuse with the same type and rating.
• Use a clamp with a captive bolt when a single hanging bracket is used.
• In the event of a serious operating problem, stop using immediately.

DO NOT

• Open this product or attempt any repairs. It contains no user-serviceable parts.
• Look at the light source when the product is on.
•  Use if the power cord is crimped or damaged.
• Disconnect by pulling on the power cord.
• Allow flammable materials close to the product when it is operating.
• Touch the housing when it is on.
• Block any ventilation holes/slots in the housing.
• Connect to a dimmer or rheostat.
• Carry the product by its power cord.
• Operate in temperatures higher than 104°F (40°C).
• Expose to environments that exceed the Ingress Protection (IP) rating.
• Expose to rain or moisture.
• Use outdoors.
• Submerge.
• Leave outdoors for extended periods of time.
• Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation, or shock.
• Set this product on a flammable surface.

FCC Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

What is Included

• COLORband PiX M ILS
• Power cable
• Hanging bracket
• Quick Reference Guide

Control Panel Description

value when in a function
< DOWN>| Navigates downwards through the menu list and decreases the numeric value when in a function
< ENTER>| Enables the currently displayed menu or sets the currently selected value into the selected function

ILS Connection
The COLORband PiX M ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated Lighting System (ILS) ecosystem (patent pending). For more information about configuring the COLORband PiX M ILS into ILS mode, please refer to the User Manual available at www.chauvetdj.com.

Contact Us

General Information  Technical Support

Chauvet World Headquarters

• Address: 3360 Davie Rd.
• Voice: 844-393-7575
• Davie, FL 33314
• Fax: 954-756-8015
• Voice: 954-577-4455
• Email: chauvetcs@chauvetlighting.com
• Fax: 954-929-5560
• Toll Free : 800-762-1084
• Website: www.chauvetdj.com

Chauvet U.K.

• Address: Unit 1C
• Email: UKtech@chauvetlighting.eu
• Brookhill Road Industrial Estate
• Pinxton, Nottingham, UK
• Website: www.chauvetdj.eu
• NG16 6NT
• Voice: +44 (0) 1773 511115
• Fax: +44 (0) 1773 511110

Chauvet Benelux

• Address: Stokstraat 18
• Email: BNLtech@chauvetlighting.eu
• 9770 Kruishoutem
• Belgium Website: www.chauvetdj.eu
• Voice: +32 9 388 93 97

Chauvet France

• Address : 3, Rue Ampère
• 91380 Chilly-Mazarin
• Email : FRtech@chauvetlighting.fr
• France Website : www.chauvetdj.eu
• Voice : +33 1 78 85 33 59

Chauvet Germany

• Address : Bruno-Bürgel-Str. 11
• 28759 Bremen
• Email : DEtech@chauvetlighting.de
• Germany Website : www.chauvetdj.eu
• Voice : +49 421 62 60 20.

Chauvet Mexico

• Address : Av. de las Partidas 34 – 3B
• (Entrance by Calle 2)
• Email : servicio@chauvet.com.mx
• Zona Industrial Lerma
• Website : www.chauvetdj.mx
• Lerma, Edo. de México, CP 52000
• Voice : +52 728-690-2010

Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.

COLORband PiX M ILS QRG ML6 Rev. 1 © Copyright 2022 Chauvet
All rights reserved

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>