SmallRig WR-03 Wireless Remote Controller User Manual

SmallRig WR-03 Wireless Remote Controller

INTRODUCTION

In order to ensure user’s safety and prevent the product damages caused by any improper use, please carefully read the “Warnings” below and properly keep this User Manual for future reference.

Foreword

Thank you for purchasing Small Rig’s product.

Warnings

• Please read this User Manual carefully.
• Do not use the product in water.
• Do not let the product fall to the ground, be hit or suffer violent impact.
• Do not use the product in the completely closed environment, or it may lead to rise of internal temperature, which causes product failure, ignition or other accident.
• Never remove the non-detachable lithium battery without permission.
• When the battery is not in use for a long time, please charge and discharge the battery each 6-month, and provide it with approximately 60% of the electric quantity to prolong its use life.
• Since there are some hazardous substances in the battery, please do not discard it. Instead, dispose of the product that is damaged or will never be used according to the waste management measures.

Intended Use

• Please read this User Manual carefully, especially the “Warnings”
• It will be regarded as an improper use when the users are not correctly follow the user manual or use the product under the specific working condition.

Please do not disassemble the product. If you have any question,
please contact the seller to apply after-sales service.

Product illustratiao

Welcome to use the new Small Rig Wireless Remote Controller (Cold Shoe), which supports wireless remote shutter when doing mobile shooting.

Functions

Wireless Remote Control: SmallRig Wireless Remote Controller is capable for wireless shutter function, the operating instructions are shown in the following table:

Shutter Name| SmallRig WR-03|
---|---|---
Turning On| Press the button for 2 seconds to turn on, the indicat or light flashes quickly for 8 seconds to enter the pairing state, and the indicator light flashes green slowly in the pairing state| The indicator flashes green
Turning Off| Press the button for 2 seconds, the indicator light will be on for 2 seconds, flash 2 times and then turn off| The indicator turns off
No Paired Connection| The indicator flashes green slowly| The indicator fl ashes slowly
Paired Conne c tion| After successfu l pairing, the indicator light turns off. If without operation for 10 minutes, the controller will turn off| The indicator turns off
Automatically Turning Off| If no pairing, it will automat ically turn off without operation for 3 minutes| The indicator flashes off
Photograpihng| Press the button shortly and the green light flashes once| The green light flashes once
Video Shooting| Press the button shortly to turn on shooting, and the green light flashes once; Press the button again to stop shooting and the green light flashes once| The green light flashes once
Low Battery| When the battery voltage is below 2.5V, the indicator flashes red| The indicator flashes red slowly
Automatic Pairing| After turning on, if the wireless control of the last paired mobile phone is turned on, it will be automatically connected directly|
Automatic Pairing after Wake up from Sleep Mode| After waking up from sleep,if the wireless control of the last paired mobile phone is turned on, it will be connected automatically|
Phone Deletes the Connection| When connected, unpair inside the phone, the remote controller will enter the unpaired connection state| The indicator flashes green slowly
Distance too Far to Disconnect| If the distance between the remote controller and the mobile phone is too far (greater than 1Om), the remote controller will enter the unpaired connection state| The indicator flashes green slowly

SPECIFICATION

In the Box

Wireless Remote Controller x 1

Service Warranty

Please keep your original receipt and guarantee card. Be sure the dealer has written on it the date of purchase and SN of the product. These are required for warranty service.

After-Sales Warrenty trem

1. Days DOA Return Policy: Within 7 days from the date of the package receipt, return or replacement can be done if the item received is malfunctioning or physical damaged (not caused by human abused), return shipping cost will be on SmallRig’s charge.
2. SmallRig products are entitled to warranty services as of the date of payment.

• Electronic products: 1-year warranty, 1-year free warranty service.
• Non-electronic products: 2-year warranty, 2-year free warranty service.
  Note: In case of any conflict between our warranty period policy and applicable laws and regulations of the country/ region where the products are sold, the latter shall prevail.

This warranty does not cover:

1. Defect caused by users’ violation of the “Warnings” and “Intended Use”.
2. The product identification or SN label is removed or defaced in any way.
3. Product damage caused by problems not attributable to the quality of the products such as improper use of the products.
4. Product damage caused by unauthorized modification, disassembly, repair and other acts.
5. Product damage caused by fires, floods, lightning and other force majeure factors.

Warranty Mode:

• For the products within the scope of warranty, SmallRig wi ll repair or replace them on the basis of specific fai lures; the repaired/replaced products/parts are entitled to the remaining part of the original warranty period.

Contact Information

• You’re advised to contact the online customer service personnel of corresponding shopping platform and submit a repair service application.
• You may also apply for repair service through SmallRig’s service email.

Service Email: support@smallrig.com
For more support information : www.smallrig.com/support

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1 l This device may not cause harmful interference.
(2 This device must accept any interference received, including interference that may cause undesired operation.

[Warning]

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

[Note]

This equipmet has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment to an outlet in a different circuit than the receiver is connected to.
Consult the dealer or an experienced radio/TV technician for help.
RF Warning Statement
This device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

**FCCID:2BC2U-4405LEQI

**

Prolinx GmbH Brehmstr.56,40239 Duesseldorf Germany eu@euIinx.eu

Prolinx Global LTD 27 Old Gloucester Street London,WCl N3AX, UK eu@euIinx.eu

Manufacturer: Shenzhen Leqi Network Technology Co., Ltd.
Add: Rooms 103, 501 and 601, Building 5, Feng he Industrial Park, Nos. 1301-50 Guanguang Road, Longhua District, Shenzhen, Guangdong, China.

Consignor: Shenzhen LC Co., Ltd Add: Rooms 602, Building 5, Fenghe Industrial Park, No. 1301-50 Guanguang Road, Xinlan Community, Guanlan Street, Longhua District, Shenzhen, Guangdong, China.

www.smallring.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>