ZYXEL EX3500-T0 Dual Band Wireless AX3000 Gigabit Ethernet Gateway Owner’s Manual

June 13, 2024
ZYXEL

ZYXEL EX3500-T0 Dual Band Wireless AX3000 Gigabit Ethernet Gateway

ZYXEL-EX3500-T0-Dual-Band-Wireless-AX3000-Gigabit-Ethernet-Gateway-
product

Package Contents

ZYXEL-EX3500-T0-Dual-Band-Wireless-AX3000-Gigabit-Ethernet-Gateway-
fig-1

Hardware Connections

ZYXEL-EX3500-T0-Dual-Band-Wireless-AX3000-Gigabit-Ethernet-Gateway-
fig-3

INTERNET

  • Green
    • On – Internet is ready.
    • Blinking – The Zyxel Device is transmitting/receiving Internet data.
  • Red
    • On – The Zyxel Device attempted to get an IP address, but failed.
    • Off – WAN connection is down or in Bridge mode.

POWER

  • Green
    • On – Power is on.
    • Blinking – The Zyxel Device is starting up.
  • Red
    • On – There is a malfunction.
    • Blinking – The Zyxel Device is upgrading firmware.
  1. Use an Ethernet cable to connect the WAN port to a gateway modem.
  2. Connect a computer to the LAN port using the yellow Ethernet cable (optional).
  3. Connect the power cable to the Zyxel Device and press the ON/OFF button.

WiFi Connection

Using SSID

ZYXEL-EX3500-T0-Dual-Band-Wireless-AX3000-Gigabit-Ethernet-Gateway-
fig-6

  1. Use the SSID and Wireless key on the device label to connect wirelessly to the Zyxel Device.
  2. On your smartphone or notebook, find this SSID. Enter the Wireless key to connect.

Using WPS

ZYXEL-EX3500-T0-Dual-Band-Wireless-AX3000-Gigabit-Ethernet-Gateway-
fig-7

  • Amber
    • Blinking – The Zyxel Device is connecting to 2.4 GHz WiFi client via WPS
  • Green
    • On – 2.4 GHz WiFi is ready.
    • Blinking – The Zvxel Device is transmitting/receiving data.
  1. Press the WPS button until the WiFi 2.4G and 5G LEDs light up in amber.
  2. Press the WPS button on the client. If the WPS method fails, use the SSID and wireless key to set up a WiFi connection (2-a).

Quick Start Wizard

ZYXEL-EX3500-T0-Dual-Band-Wireless-AX3000-Gigabit-Ethernet-Gateway-
fig-10

  1. Open a web browser and go to http://192.168.1.1. Enter the default User Name (admin) and admin Login Password (on the device label), and then click Login. The Wizard runs. Follow the Wizard prompts to complete the setup.

Support Information

See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.

EU Importer

UK Importer

US Importer

Copyright © 2023 Zyxel and/or its affiliates. All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals