WIMIUS P64 Projector User Manual

WIMIUS P64 Projector

PACKAGE LIST

PROJECTOR SPECIFICATIONS

Model No.: P64

Display Technology| LCD| Light Source| LED
Native Resolution| 1920xl080P| Zoom Function| 50%-100%
Installation Type| Front/Rear on Desk, Front/ Rear on Ceiling| A **t R t’ spec a 10| 16: 9/4: 3/Auto
Projection Distance| l.5-6m| Power Voltage| AC100-240V
Product Size| 197227163mm| Product Weight| 2.7kg
Keystone Correction| Auto + Electric| Focus| Auto + Electric
Input Interface| HDMl2/ USB2/ AV/ 3.5mm audio out
VideoFormat| H.264/H.265/MP4/ AVI/WMV /MKV /FLV
Audio Format| MP3/WAV/MAK
Image Format**| JPG/PNG/BMP/ JPEG

PRODUCT STRUCTURE

• 1. Power
• 2. Arrow Keys
• 3. confirm
• 4. Back
• 5. Manual Focus +
• 6. Manual Focus –
• 7 / 8. USB Ports
• 9/10. HDMI Ports
• 11. AV Ports
• 12. 3.5mm Headphone jack
• 13. Infrared signal receiving window
• 14. Anti-Dust Mesh (Regular Cleaning Recommended)

Remote Control

1. Power
2. Home
3. Arrow keys
4. Menu
5. Pause the tape
6. Volume+
7. Volume –
8. Mute
9. Setting
10. Confirmation key
11. Back
12. Focus+
13. Focus –
14. Source

Note:

1. Install 2 pieces of AAA batteries(not included) into the remote before using it, do not combine new batteries with old ones in the remote control, which can cause operation failure due to insufficient power supply.
2. When using the remote control, please make sure that the signal transmitter of the remote control aims at the infrared signal of the projector.
3. When you are not using the remote control for a long period. Please take out the batteries to prevent them from leaking.

INSTALLATION

Installatron Method

• The projector can be hung on the ceiling with a special hangar frame. and placed on the table desk to project the image according to the operating environment and requirements. In addition, the projector can be installed with the following methods:
• Keep the projector at a height where Its lens Is axial symmetry to the screen. If this is not possible, use the keystone correction function to adjust the projection Image.

ProJectlon Distance and Size

Aspect Ratio: 16:9

Distance| Screen Size
1.6m| 49″
2m| 60″
2.5m| 75″
3m| 93″
3.5m| 109″
4m| 125″
4.5m| 141″
5m| 157″
6m| 300″

• The Image size depends on the distance between the projector and the screen. there may be a 3% measure difference among the data.
• The recommended projection distance is 2.5-3m.
• Ambient darkness will improve the clarity of the projector images.

lnstall on the Celling
Keep the projector vertical and towards the mid of the projector screen, and keep the projection image flat on the screen.

1. To adjust the tilt base, unscrew the support rod at the bottom of the projector, see the below picture.
2. For the Ceiling mount, there are 4 holes at the bottom of the projector (M4*10mm). Please slowly unscrew the 4 black rubbers. and then you can find the holes for the ceiling mount, see the below picture.
   • NOTE: The hanging bracket or ceiling mount stand is not packaged.

STARTING PROJECTOR

1. Remove the lens cap, connect the projector to the power through the power supply cable. and press the power key on the remote or projector. it starts working.;
2. Use the Automatic or Electronic keystone/ focus function of the projector to get a rectangle and clear image;
3. Adjust the focus button”F+” “F-” on the projector or the remote to get the best image performance; (If it is still blurry, please try to adjust the projection distance.)
4. Connect the external device (smartphone. iPad, Fire Stick. TV box. DVD player. PC, etc.in the corresponding interfaces of the projector, please be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal)
5. Select the ” ” menu.enter the [ Language Settings]. and then you can set your preferred language.

PROJECTION IMAGE SETTINGS

ProJectlon Mode
select the I Projection Image settings ] menu — Select the I Projection setting Option ] — Select the [1n1tall Mode]. Press the arrow rey to select and press “OK” to confirm the projection position.

Manual Keystone correction

Four-Point Keystone
Select the [ Projection Image Settings ] menu — Select the [ FourPoint Keystone ] Option. Just click: “OK”‘ button to pick the point you went to adjust at first, and then press the button· ·or “f’ · to set the value(Horizontal and Vertical 0-100) needed as shown below.
Reset Press = . and the image will restore to the original keystone correction settings.

Horizontal and Vertical Keystone

• select the [ Projection Image Settings I menu — select the Horizontal or Vertical Keystone Option to adjust the screen horizontally or vertically:1:300 with the arrow keys until the guides are adjusted to a rectangle.

Auto Keystone Correction and Focus

• Please place the projector horizontally face to the wall first, Select the [ Projection Image Settings ] menu — turn on the [ omnldlreetlonal Automatic COrreetlon ] or [ Auto Focus ] option. then It wlll automatically focus the picture based on the projection
• distance from the screen and adjust the picture to a rectangle when you change the projection angle.
• If the plate. are Is blurry, press repeatedly the focus button “F+” “f-” on the remote control to adjust the lens focus. tap or long-press the adjustment button until the picture Is clear(There ls no need to press the OK button after the screen is clear).
  • Note: The side proJectlon angle ol the proJector should not exceed 200, otherwise the automatic keystone correction function may not work.

Zoom Settlng
Go to the home page — Select the [ ©] menu — Select the [ Projection Image Settings ]– Select the [ Zoom ] option, the projection screen can be zoomed 50’1-100’1. Press the button· ◄►· to set the value needed as shown below.

SETTING UP THE PROJECTOR

Select The Input stgnal Source

• Select the desired Input signal source (HDMII/HDMl2/ AV) on the home page, or you can press the ·s· button on the remote control to select the corresponding signal source, For USB devices, no need to choose the signal source. The machine will detect them automatically.
• When playing o video. you can press the menu button  =, then set the aspect to retie cf the image and other playback modes.

Connecting with Smartphones and IPad Warming Tips:

1. The fluency of screen mirroring with a wireless connection will be affected by the network environment. A bandwidth cf l00Mbit or more is recommended when using screen mirroring.
2. Maka sure your mobile device Is close to the projector when using a wireless connection. A distance of 1 meter Is recommended.
3. some Android devices may not support screen mirroring due to the compatibility.
4. Any questions, please feel free to email WiMiUS vie support01@wimius.com.

WIFI setting
Select the settings icon in the upper right corner of the main interface. and then press the ‘OK” key on the remote control to enter the settings interface and select ‘WiFi Settings·.
Far 10S Sptem (Airplay) Setting with Home Wi-Fi
Attention: Your device and the projector should be In the same Home WIR.

1. Turn on the WiFi Setting of the projector.
2. Choose your Home WlFl to connect and enter the right password, then click ‘Donelo connect, please wait 3-5 seconds to establish the connection. Once connected, it will remember the password of the connected WiFi.
3. Turn on the WIFI setting of your 1O mobile device, then connect It to the same Home WiFi as the projector.
4. Then click “Airplay’ as the Input Source for your projector.
5. Swipe up the screen of your iOS mobile device and tap ·screen Mirroring” to search for the projector, then select’WiMiUS-P64 Projector” from the search results to connect
   • B. Succeed.

For Android System(Mlracaat)
To activate this function. Your Android device must support a Multi- Screen/Wireless Display. The name of “Multi-screen· may vary depending on various brands of Android devices.
Setting with mobile internet

1. Turn on the projector, and select “Miracasf as the Input Source.
2. Turn on the “Multi-Screen/Wireless Display” of your Android device.
3. Select W!MiUS-P64 Projector” from the search results to connect.

Succeed.
Notes: If you want to connect it to your home wifi, just repeat the steps of the 10S system and select Miracast.

Bluetooth Settings

connect Bluetooth Speakers

1. Turn on your Bluetooth Speaker.
2. Turn on the [Bluetooth Settings] of your projector and select [ add acceuory].
3. Select your Bluetooth speaker to connect
4. Succeed.

Note:

1. This step is only applicable to connecting the Bluetooth speaker but not to mobile phone Bluetooth.
2. The P64 projector is compatible with most Bluetooth headsets, Bluetooth speakers, and Airpods, but not Bluetooth keyboards.
3. lf you have any questions, please feel free to email WiMiUS via: support01@wlmlus.com.

Connect Phone Bluetooth

1. Enter the soundbar option In the main Interface, the following Interface will be displayed.
2. Tum on the Bluetooth of your phone and connect the Bluetooth of the projector named “WIM1US-P64 Projector·.
3. Then the projector can play mobile phone music.

SIGNAL LINES CONNECTION

WiMiUS P64 projector has 6 interfaces, HDMI ports•2/uss ports*2/3.5mm headphone output/AV output. Please select the correct connecting port to connect your device (PC Phone. DVD Player, sound bar, USB, PS4, etc.)

1. USB Multlmedla Connecting
   For USB devices, no need to choose the signal source. The machine will detect them automatically.

   • Select the required category “movie”. “music”. “photo” or “Office Suite” in the main interface, and press the “OK” key on the remote control to enter the corresponding category.
   • According to the programs to choose: “photos· “music” “movie” or “Office Suite”.
   • Choose the file you want to play, and press the key “OK” to play or pause the file. (You cannot enter the required category without connecting a USB disk.
   • Note: For the “Office Suite” option, you can play, and demo PPT files.

2. Connecting with the PC

   • connect the projector to the PC by HDMI cable.
   • Choose the media signal channel: 1-IDMI”

3. Connecting with MacBook or Mac Book Air

   • Choose the media signal channel:1-IDMI”
   • Use a Type-C to HDMI adapter to connect your MacBook, or a Mini Display to HDMI adapter to connect with your MacBook Air (adapter not Included).

4. Connecting with the Soundbar

   • Use the 3.5mm audio cable coming with the projector to connect with the soundbar.
   • Turn on the projector and the sound bar(choose AUX mode).
   • More details. please contact the seller at support01@wimius.com.

5. Connecting with DVD use the 3-ln -I AV cable ln the package

   • Turn on your DVD player and the projector;
   • Connect the colourful female connectors to your DVD player(s RCA cable with the 3-in-1 AV cable in the package:
   • Connect the bicycle connector to the AV port of the projector, and enter the home page to select [ AV ] as the signal source.
   • Or connect to the DVD Player with the HDMI cable in the package.

6. Connecting with ff re TV Stick

   • Plug the TV stick into the HDMI port of the projector.
   • Choose the medic signal channel: ‘HDMI
   • P.S.: It only supports 1080P TV sticks, not 4K TV sticks.

7. COnnectlng with XBOX/PS4

   • Choose the medic signal channel: ‘HDMr
   • Use HDMI cable to connect to XBOX/PS4

MAIN MENU FUNCTION

ProJectlon Image setting

Install Mode

| Front-Desktop / Rear-Desktop / Front­ Ceiling / Rear-Ceiling| Choose the projection methods.flip the image

FourPoint Keystone

| ****

4-point Keystone correction

| Adjust the four points to make the projected image a rectangle: Value 0-100

System Local Update

0ther Settings

About

Software Version

| ****

Product version

| ****

Product version

System Upgrade

| ****

Update the system

| ****

Update Online

Factory Reset

| ****

Reset

| Restore all settings to their factory settings

FAQ

1. The remote control does not communicate with the projector.
   • The power switch at the back of the projector is turned on or off?
   • The remote control’s batteries are depleted?
   • Something obstructing the signal between the remote and the IR
2. No image on the screen.
   • Is the channel set up correctly?
   • Is there an input signal?
   • Is the input cable plugged well?
   • Under PC mode, is the refresh rate> 75KHz?
3. Blue screen.no picture.no sound.
   • Input cables are connected, right?
4. Picture right. no sound.
   • Input cables are connected, right?
   • Volume at min or on Mute.
   • Trun off tha AC3/Dolby IIGUnd and 1181: It to atareo IIGUnd.
5. Can’t play the movies.
   • The format of the video is right?
   • Files are broken?
   • The device is broken?
6. Can’t play video in App Netflix, Hulu, Amazon Prime
   • Those APPs are limited to HDCP. This model doesn’t support this function. So it can’t support these apps.
7. Can’t find devices when connected with a hard drive or flash drive.
   • Check if the device is broken.
8. Auto-off after working for a while
   •  The projector ventilation is blocked or the voltage is not stable.
   • Send a video to support01@wimius.com. to check for you.
9. Not compatible with your Bluetooth speaker?
   • The projector may not be compatible with some versions of Bluetooth speakers of JBL.
   • Contact our after-sales email at support01@wimius.com. immediately and tell us the brand and model of your Bluetooth speaker.
10. WiFi connection is not stable?
    • Please check whether the network of your phone is well.
    • Make the distance between the phone and the projector within 1 meter.

WiMiUS 7D/24H Professional Support Dear customer,

• Thank you very much for supporting WiMiUS!
• Please read this manual thoroughly before using the projector. If you have any issues, email your country code, order number, and the problem for example US+P64+No Voice) to support01@wimius.com. We will provide a fast solution within 24 hours.
• Actually, many problems can be easily solved by setting, such as no signal, no sound, Bluetooth connection failure,
• WiFi connection failed, dark spots, choppy animation, etc. we promise all the projectors have been 100% carefully checked and packaged before shipping.
• If you have any questions, could you please contact us so that the problem can be solved? And give us an opportunity to improve.
• We guarantee we will provide you with a satisfactory solution.
• Thanks for your understanding! WiMiUS Service Team

TIPS:

1. Do not place the projector in too warm or too cold a room, because the high temperature or low temperature will shorten the lifespan of the device. The working environment would be 5°C-35°C better.
2. lf there are black spots on the projection screen, please don’t worry, please contact support01@wimius.com via email, and we can send you a video about how to remove the dust.
3. The ventilation is equipped for the projector to work stably. Don’t cover the vent with cloth, blanket or other things. Don’t insert anything into the slit of the projector, or it may produce a short circuit or an electric shock to your device and cause damage.
4. The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move and on strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
5. Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with a soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>