WIMIUS P61 Mini Projector 9500 Lumens 5G WiFi Bluetooth User Manual

WIMIUS P61 Mini Projector 9500 Lumens 5G WiFi Bluetooth

Thank you for purchasing WiMiUS P61 video projector. Please read this manual carefully before you use the projector. If any questions during using it, feel free to contact us at support@wimius.com.
We sincerely hope this projector can make your life more colorful.

Warnings

• High brightness lamp! Please don’t look directly into the lamp.
• Adjusting the contrast, brightness and focal length according to different input signals is the key to make the picture clear; otherwise, the picture will be blurred;
• There is high voltage inside the projector. It is forbidden to open the cover and touch the internal parts of the machine.

Safety Precautions

• Clean
  When clean this projector, please pull out the power cable. Use a wet cloth to clean, don’t use any detergent that may damage the unit.

• Accessory
  Please use our recommended accessory. or it will damage the projector.

• Correct environment
  Do not place the projector in a wet environment, like damp basement or near the swimming pool, etc.

• Ventilation
  The ventilation is equipped for the projector to work stably. Do not put anything around the vents. Or it will cause the projector heating up.

• Power
  Please make sure the power is within the required power range.

• Thunder
  For thunder day, please unplug the power cable from the projector.

• Repair
  Due to high voltage inside, please do not open or try to repair the projector by yourself. Please ask a professional technician to repair the projector.

• Keep away from heat device
  Please make sure the projector is far away from any heat devices which will damage the projector.

Accessories

• Projector x l
• Remote Controller x l
• Power Cable x l
• 3 in l AV Cable x l
• HDMI Cable X l
• User Manual x l

Projector Structure

Note: Please refer to the product appearance, this figure is for reference only.

Remote control structure

1. Play/ Pause
2. Power Key
3. Electric Focus Button
4. Up
5. Left
6. Back
7. Volume­
8. Mute
9. Electric Focus Button
10. Ok
11. Right
12. Down
13. Input Source
14. Volume+
15. Menu

Specifications

Projection size chart

Note: Optimum projection distance: 2.5m

Focus function

Get clear images in just one step: press the electric focus button on the remote control to make the picture clear.

Signal source menu operation

Before using the projector to play videos, please choose the corresponding signal source of your device.

• Operate through the remote control: press ” ( ) ” and then press [ up arrow ] / [ down arrow ] to confirm.
• For USB, no need to choose the signal source. The machine will detect them automatically.

Connecting with Smartphones and lad

Wireless Connection
P.S: The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of l00Mbit or more is recommended when using screen mirroring. Make sure your mobile device is closed to the projector when using wireless connection. A distance within l meter is recommended.
For los system (Method : setting with Home WI-Fi)
Attention: Your device and the projector should be in the same home WiFi.

• Turn on the WiFi Setting of projector and click “wireless” to choose your home WiFi .
• Enter the right password, then click “connect” to connect, please wait 3-5 seconds to establish the connection. Once connected, it will remember the password of the connected WiFi.
• Turn on the WiFi setting of your IOS mobile device, then connect it the same home WiFi as the projector.
• Then click “Mcasr( )as the Input Source of your projector and click the “Airplay”( )
• Open the screen of your iOS mobile device and click “Screen Mirroring” to search for the projector, then select “P61 WiFi Projector” from the searching results to connect.
• Succeed.

For Android System
To activate this function, your android device must support Multi- Screen/Wireless display. Names may differ from different devices.

Method:

• Then click”Mcast” as the Input Source of your projector and click the”miracast”
• 0pen the screen of your Android mobile device and click ·screen Mirroring” to search for the projector, then select”P61 WiFi Projector “from the searching results to connect.
• Succeed

Connecting with Bluetooth Speaker

• Turn on your Bluetooth speaker.
• Turn on the Bluetooth setting of your projector.
• Select your Bluetooth speaker to connect.
• Succeed.

Other connections

Connecting with PC

• Connect projector with PC by HDMI cable.
• Choose the media signal channel :”HDMI”.
  PS: To connect with macbook, an external HDMI to type C cable is needed.

Connecting with Sound bar

• Use the 3.5mm aux cable to connect with soundbar.
• Turn on the projector and the sound bar.
• More details, please contact seller at support01@)wlmlus.com.

Connecting with DVD

• use the AV cable coming with the projector to connect with DVD.
• Turn on the projector and DVD player.

use Multimedia Connecting

• Insert the USB drive to corresponding interface.
• Choose the video or picture to play.
  USB Format: FAT,FAT32:8G/16G/32G and NTFS:64G

Installing the projector
This projector doesn’t have keystone correction, so we suggest to put it on the desk, facing front to the screen. Kindly please don’t tilt the projector.

Main Function of the Menu

Picture Menu

Important Notices:
Picture Mode: Only under mode” User” we could change the Contrast/Brightness/Color/Sharpness of the picture.

Sound Menu

Note:
In the Sound mode “User” interface, you can adjust the “Treble/Bass· of the image by using the +- button on the remote control in the “0-100” range.

Time Menu

Option Menu

FAQ

with HDCP. Only when connected with TV stick, Chromecast, it can support these apps.
Wifi connection is not stable|

• Please check whether the network of your phone is well.
• Make the distance of phone and projector within l meters.

Indicator light is off when plug into power supply|

• The power cable not connected well.
• The power button on the back of the projector is off.

can’t connect with Bluetooth speaker|

• Plugging an external Bluetooth transmitter to the projector
• Connect with 3.5mm aux cable
• Please email us with the Bluetooth speaker brand and model

• ls the channel set-up correct?
• Is there input signal?
• Is the input cable plugged well or in the wrong position?
• Under PC mode, is the refresh rate > 75 KHz?

Picture right, no sound|

• lnput cables connected right?
• Volume at minimum or on Mute. 3.Turn off the dolby of the input devices.

It will shut off automatically after turn on for a while|

• Is there a barrier around the ventilation?
• Low voltage or big voltage fluctuations.
• Check the over-heat protection system.

Can’t find devices when connected with hard drive or flash drive?|

• Re-plug the device.
• Check if the device is broken.

Can’t play the movies|

• The format of the video is right?
• Files are broken?
• Device is broken?

Power Input: ACl00-240V, 50-60HZ, 60W
FCC ID: 2A4K9-U5

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &. your body.
This device contains licence-exempt transmitter(s) /receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator &. body.

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Declaration of Conformity

We (Manufacturer is responsible for this declaration)
YABER TECHNOLOGIES CO.,LIMITED
(company name)
Room 406, 4 Floor, B Building, BanTian International Center, HuanCheng South Road, BanTian Street, LongGang District, Shenzhen
(company address)
declare under our sole responsibility that the product
Trade name: MiMiUS
Equipment: Entertainment Projector
Model No. : P61
to which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive(2014/53/EU) a: RoHS(20ll/65/EU) product is responsible to affix CE marking, the following standards were applied
EN 62368-1:2014+All:2017
EN /EC 62311:2020
ETSI EN 301 489-1 V2.2.3(2019-ll)
ETSI EN 301 489-17 V3.2.4(2020-09)
EN 55032:2015
EN 55035:2017
EN 61000-3-2:2019
EN 61000-3-3:2013+Al:2019
ETSI EN 300 328 V2.2.2(2019-07)!EC62321-3-1:2013 IEC62321-4:2013
/EC62321-5:2013
/EC62321-6:2015
IEC62321-7-1:2015
/EC62321-7-2:2017
/EC62321-8:2017
Full Name: George. wang
Signature: George. wang

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>