WIMIUS K1 Video Projector User Manual

WIMIUS K1 Video Projector

Product Information

Thank you for your purchase with WiMiUS K1 video projector. Please read this manual carefully before using the projector.
If you have questions about the projector, please contact us at support@wimius.com
We sincerely hope this projector can make your life more colorful.

Warnings: High brightness lamp! Don’t look straight into the lens when the projector is on.

Safety Precautions

1. Clean
   When clean this projector, please pull out the power cable. Use a wet cloth to clean, don’t use any detergent that may damage the unit.

2. Accessory
   Please use our recommended accessory. Or it will damage the projector.

3. Correct environment
   Do not place the projector in a wet environment, like damp basement or near the swimming pool, etc.

4. Ventilation
   The ventilation is equipped for the projector to work stably. Do not put anything around the vents. Or it will cause the projector heating up. To ensure the stability of heat dissipation, please open the height bracket in the bottom of the projector before starting.

5. Power
   Please make sure the power is within the required power range.

6. Thunder
   For thunder day, please unplug the power cable from the projector.

7. Repair
   Due to high voltage inside, please do not open or try to repair the projector by yourself. Please ask a professional technician to repair the projector.

8. Keep away from heat device
   Please make sure the projector is far away from any heat devices which will damage the projector.

Accessories

Product Overview

1. Level-Stand Adjustment

2. IR receiver

3. Focus Lens

4. Power port

5. IR for remote control 6.3.5mm audio output

6. HDMI 1 port

7. Removable dust cover

8. USB port

9. AV port

10. HDMI 2 port

11. Built-in Speaker

12. Cooling window

13. Focus

14. Switch of removable dust cover

15. Keystrokes（picture 1）

16. Rating label

17. Projector mount holes

18. Level-stand adjustment

19. Power Key

20. Exit

21. OK Key

22. Up Key

23. Down Key

24. Left Key

25. Right Key

Remote Control

1. Power
2. Source
3. Arrow keys
4. Menu
5. Homepape
6. Volume +
7. Volume –
8. Mute
9. Picture flip
10. Confirmation key (Play and Pause)
11. Return
12. Previous (Video)
13. Next (Video)

Note:

1. While using the remote control, point it toward IR receiver.
2. To avoid battery leakage corrosion, please take the batteries out if not use it for a long time.

Specifications

Model No: K1

Imaging System| LCD| Power| AC100-240V/50-60Hz
Light Source| LED| Dimension| 262311CM
Color| 16.8M Full Color| Resolution| Native 19201080 Full HD
Projection Distance| 1.5-7m| Input Interface| HDMI2/AV/ USB*2/ AUDIO OUT
Projection Size| 50-300”| Zoom Function| 50%-100%
Aspect Ratio| 16:9 /4:3| Output Interface| AUDIO OUT
Keystone Correction| ±50° Digital| Project Weight| ≈ 2.22kg

Projection Size Chart

Optimum projection distance: 3m
Please allow ± 3% to the image sizes in the table above. If the distance is less than min data and more than max data, the image could be blurry.

Projector Installation

1. We provide a screw in the packaging, there is a screw hole at the bottom of the projector, you can install it to lift the base of the projector on the plate to get a better projection angle. See below(1).
2. For Ceiling mount, there are 4 holes at the bottom of the projec-tor(M5*16mm). Please slowly rotate it out first. See below(2)(3).

Note: The hanging bracket is an accessory that is not supplied.

Operating Instructions

• To get better watching experience,please use it in dark or semi-dark room.
• Please use the projector carefully, dropping or crashing may damage parts or result in blurred images and abnormal displaying.

Getting Started

1. Remove the lens cap, connect the projector with the power through power supply cable, it starts work.
2. Then boot screen appears, like the picture.

Focus and Keystone Correction

1. Adjust the keystone correction first.
   How to Use Projection Settings
   Select the settings icon in the upper right corner of the main interface, and then press the “OK” key on the remote control to enter the settings interface and select “Projection Image Setting”. After entering the interface, select the mode you want in the projection settings, then adjust the keystone as you want.

Vertical Keystone
When you choose “Keystone Advanced: Front”, then you can ajust Manual Keystone (Vertical )between : ±50°, just press the button to set the value.

Horizontal Keystone
When you choose “Keystone Advanced Side”, you can set “4-point Keystone”as your need: Horizontal Value ±64, Vertical Value from±36
Just click “OK” button to pick the point you want adjust at first, and then presse the button to set the value needed as shown below.

Focus Adjustment
Turn the trackwheel clockwise to bring the trackwheel to the end, then slowly rotate the trackwheel counterclockwise. At the same time, carefully observe the pixels on the screen. When the image particles are the clearest (Subjed to the middle of the image), the pixels on the screen are the best focus of the lens.

Connect input devices and then choose the signal source button to choose the corresponding signal source ( HDMI1, HDMI2, AV,etc)
Just operate through the remote control: Press and then press  to choose the corresponding signal input channel, then press “OK’’ to confirm.

Connecting with Smartphones and iPads

Note: This projector supports only Wireless Connection, wired connection is not possible.
P.S: The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring. Make sure your mobile device is closed to the projector when using a wireless connection. A distance of 1 meter is recommended.

How to Use WiFi Settings
Select the settings icon in the upper right corner of the main interface, and then press the “OK” key on the remote control to enter the settings interface and select “WiFi Setting”.

For IOS System

Setting with Home Wi-Fi

Attention: Your device and the projector should be in the same Home WiFi.

1. Turn on the WiFi Setting of projector.
2. Choose your Home WiFi to connect and enter the right password, then click “Done”to Connect, please wait 3-5 seconds to establish the connection. Once connected, it will remember the password of the connected WiFi.
3. Turn on the WiFi setting of your IOS mobile device, then connect it the same Home WiFi as the projector.
4. Then click“ ” as the Input Source of your projector.
5. Swipe up the screen of your iOS mobile device and tap “Screen Mirroring” to search for the projector, then select“WiMiUS-K1Projector”from the searching results to connect.
6. Succeed.

For Android System
To activate this function, your android device must support Multi-Screen/Wire- less Display. Name of “Multi-Screen” may vary depending on various brands of Android devices.
Method 1: Setting with mobile internet

1. Turn on the projector, select “Miracast” as the Input Source.
2. Turn on the “Multi-Screen/Wireless Display” of your Android device.
3. Select “WiMiUS-K1Projector”from the searching results to connect.
4. Succeed.

Method 2: Setting with Home Wi-Fi.

1. Turn on the WiFi Setting of your projector.
2. Choose your Home WiFi to connect and enter the right password, then click “Done” to Connect, please wait 3-5 seconds to establish the connection. Once connected, it will remember the password of the connected WiFi.
3. Turn on the WiFi setting of your Android mobile device, then connect the same Home WiFi as the projector.
4. Select “MiraCast” as the Input Source of your projector.
5. Swipe up the screen of your Android mobile device and tap “Wireless Display” （or trun on it in your setting）to search for the projector, then select “WiMiUS-K1 Projector” from the searching results to connect.
6. Succeed.

If any questions during connection, email us at support@wimius.com. for solution.

Connecting with Bluetooth Speaker

1. Turn on your Bluetooth Speaker.
2. Turn on the Bluetooth Setting of your projector.
3. Seclect your Bluetooth speaker to connect.
4. Succeed.

Compatible with Bluetooth speakers, Bluetooth Headphones, iPhone Airpods, Bluetooth Earbuds, and Bluetooth Earphones.

Other connections

1. Connecting with PC

   • Connect the projector to PC by HDMI cable.
   • Choose the media signal channel: “HDMI”

2. USB Multimedia Connecting
   For USB devices, no need to choose the signal source. The machine will detect them automatically.

   • Select the required category “movie”, “music”, “photo” or “Office Suite” in the main interface, and press the “OK”key on the remote control to enter the corresponding category.
   • According to the programs to choose: “photos” music” movie” or “Office Suite”.
   • Choose the file you want to play, press the key “OK” to play, or pause the file.(You cannot enter the required category without connecting a USB disk.)
   • Note: For the “Office Suite” option, you can play, demo PPT files.

3. Connecting with MacBook or Mac Book Air

   • Choose the media signal channel:“HDMI”
   • Use a Type-C to HDMI adapter to connect your MacBook, or a Mini Display to HDMI adapter to connect with your MacBook Air (adapter not included).

4. Connecting with Soundbar

   • Use the AV cable coming with the projector to connect with the sound bar.
   • Turn on the projector and the soundbar.
   • For more details, please contact the seller at support@wimius.com.

5. Connecting with DVD

   • Use the AV cable coming with the projector to connect with the DVD.
   • Turn on the projector and DVD player.

6. Connecting with Amazon fire TV Stick

7. Plug the TV stick into HDMI port of the projector.

8. Choose the media signal channel :“HDMI”

9. P.S: It only supports 1080P TV stick, not 4K TV stick.

10. Connecting with XBOX/PS4

11. Choose the media signal channel :“HDMI”

12. Use HDMI cable connect to XBOX/PS4

13. Warm tips: If you want to make the projection screen full screen during video/picture playback, you can press the “ ” button on the projector or remote control.

Main Menu Function

1. Picture Mode
   Only when you play the video，you can set the “Picture Mode”.
   Press “ ” and then select the setting on the remote control to make some personal settings.

Picture Mode

|

Standard/Soft-

/User/Vivid

| 4 image mode to adjust the “Brightness/Contrast/Satura- tion/Sharpness” of the image:0-50
Aspect Ratio| 16:9/4:3| Aspect ratio let you configure how images are displayed

Note: If the menu icon is gray, it means that this option is not adjustable. Press “Menu” button on the remote twice to switch from 16:9 and 4:3.

1. Sound Mode
   Only when you play the video，you can set the “Sound Mode”.

Sound Mode

| Standard/News/Music/Mov- ie/Sports/User| Adjust the mode of sound

1. Projection Image Setting

Projection Mode

| Front-Desktop / Rear-Desktop / Front-Ceiling /

Rear-Ceiling

| Choose the projection methods,- flip the image
Keystone Advanced| Front-Adjust Manual

Keystone

| Adjust Vertical Keystone±50°
Keystone Advanced| Side-4-point Keystone| Adjust Horizontal Keystone: 4-point Keystone value：

horizontal ±64 vertical±36

Digital Zoom| Reduce Display

100%-50%

| Reduce the size of image size

1. System Update

Update offline

Restore Factory| Reset| Restore all settings to their factory settings

1. Other Setting

projector

1. About the version of system

FQA

HDCP. This model doesn’t support this function. So it can’t support these apps.

WiFi connection is not stable?

| 1)Please check whether the network of your phone is well. 2)Make the distance of the phone and projector within 1 meter. 3)If still has a problem? Contact our after-sales service support@wimius.com immediately.
The indicator light is off when plugged into the power supply| 1)The power cable is not connected well.

The power button on the back of the projector is off.

Press the power button on the remote control and the projector does not turn on| 1) The remote control’s batteries are depleted.

2. Something obstructing the signal between the remote and IR.

No image on the screen| 1) Is the channel set-up correct?

2. Is there an input signal?

3. Is the input cable plugged well or in the wrong position?

4. Under PC mode, is the refresh rate > 75 KHz?

Picture right, no sound| 1) Input cables are connected, right?

2. Volume at minimum or on Mute?

3. Turn off the Dolby of the input devices.

It will shut off automatically after turn on for a while| 1) Is there a barrier around the ventilation?

2. Low voltage or big voltage fluctuations.

3. Check the over-heat protection system.

Can’t find devices when connected with a hard drive or flash drive?| 1) Re- plug the device.

2. Check if the device is broken.

Can’t play the movies| 1) The format of the video is right?

2. Files are broken?

3. Device is broken?

Not compatible with your Bluetooth speaker?| 1)The projector may not be compatible with some versions of Bluetooth speakers of JBL.

Contact our after-sales service support@wimius.com immediately and tell us the version of your Bluetooth speaker.

Black spot on the picture| Contact the seller for a video to remove them.
Blurry images| Please follow below 3 steps below to get a clear picture. 1. Please put the projector particularly to the screen.

2. Please adjust the keystone correction to make the picture rectangle.

Contact us

• Email:support@wimius.com.
• Website: www.wimius.com.
• Support email: Support@wimius.com.
• Website:www.wimius.com.
• support@wimius.com.
• Support email: Support@wimius.com.
• Website: www.wimius.com.

References

• Wimius Official Shop ｜Wimius Projector Online

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>