i safe MOBILE M540A01 IS540.2 Ex Proof Mobile Phone User Guide

: June 13, 2024
: i safe MOBILE

Table of Contents

i safe MOBILE M540A01 IS540.2 Ex Proof Mobile Phone
Product Information
Product Usage Instructions
SAFETY
DEVICE OVERVIEW/FUNCTIONS
PREPARATION
SWITCHING ON
CHARGING
CONNECTING APPROVED ACCESSORIES
MAINTENANCE/REPAIR
RECYCLING AND TRADEMARKS
CONTACT/SERVICE CENTRE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

i safe MOBILE M540A01 IS540.2 Ex Proof Mobile Phone

i-safe-MOBILE-M540A01-IS540-2-Ex-Proof-Mobile-Phone-
product

Product Information

The IS540.2 (model M540A01) is a device manufactured by i.safe MOBILE GmbH. It is a rugged mobile device designed for safe use in industrial environments. The device is equipped with various features and functions to enhance user experience and productivity.

Product Usage Instructions

Safety Precautions

Do not modify the device structurally.
Avoid exposing the device to high temperatures and strong UV radiation.
Avoid exposing the device to processes with high electrical charges.
Avoid exposing the device to aggressive acids or bases.
Do not use the device in places where its use is prohibited.
Turn off the device in clinics or other medical facilities.
Maintain a safety distance of at least 15 cm between the device and a pacemaker or hearing aid.
When using the device while driving, comply with applicable national laws.

Using Earphones or Headsets

Set the volume control on the device to 50% of the maximum volume.
Gradually adjust the volume to the desired level.

Preparation

The device has a card holder with a slot for a nano-SIM card and a slot for a microSD card up to 128 GB.

Switching On

Press and hold the on/off key for about 3 seconds.
Follow the instructions on the screen if it’s the first time turning on the device.
Enter the device or SIM PIN when prompted.
If two SIM cards are inserted, select a favorite card.
For more information on operating the device, visit www.isafe-mobile.com/en/support/service and navigate to the FAQ section.

Charging

Connect the adapter suitable for your country to the power supply unit.
Connect the USB-C Cable to the power supply unit.
Connect the USB-C Cable to the USB interface of the device.

FIRST

This Quick Start Manual contains all the important health and safety instructions for using the device IS540.2 (model M540A01) safely.
Read the “Safety” section of this Quick Start Manual carefully before using the device. If you do not follow these instructions or do not understand them, this could lead to death, severe injuries and damage to the device.
Read the Operating Manual before using the device.
The Operating Manual with detailed information and instructions concerning the device can be found at www.isafe-mobile.com/en/support/downloads
Also read the Safety Instructions before using the device. These can be found in the device packaging and at www.isafe-mobile.com/en/support/downloads
Follow all instructions given on the device and on the packaging.
Follow local safety regulations.

SAFETY

USE IN EXPLOSION HAZARDOUS AREAS

Only use the device in explosion hazardous areas of zones 2/22 or outside of explosion hazardous areas.
Before entering an explosion hazardous area with the device,
- make sure that only approved accessories are connected to the device, see section “Connecting approved accessories”,
- make sure that no gap can be seen between the two halves of the device,
- make sure the device is not damaged,
- make sure that all the labels on the device are readable,
- make sure the battery is screwed tight.
If you use the device in an explosion hazardous area,
- do not loosen the screws on the device,
- do not connect any accessories to the device,
- do not open any interface cover,
- do not charge the device,
- do not open the device,
- do not damage the device.
Switch off the device immediately and leave the explosion hazardous area without delay if
- malfunctions occur on the device,
- you have damaged the housing of the device,
- you have exposed the device to excessive loads,
- the labels on the device are no longer readable.

USE OUTSIDE OF EXPLOSION HAZARDOUS AREAS

Do not modify the device structurally.
Do not expose the device to high temperatures.
Do not expose the device to strong UV radiation.
Do not expose the device to processes with high electrical charges.
Do not expose the device to aggressive acids or bases.
Do not use the device in places where its use is prohibited.
Turn off the device in clinics or other medical facilities.
Always keep a safety distance of at least 15 cm between the device and a pacemaker or hearing aid. The device can affect the functioning of medical devices such as pacemakers and hearing aids.
When using the device while driving a motor vehicle, be sure to comply with applicable national laws.

WHEN USING EARPHONES OR HEADSETS

First set the volume control on the device to 50 % of the maximum volume.
Gradually adjust the volume.

DEVICE OVERVIEW/FUNCTIONS

i-safe-MOBILE-M540A01-IS540-2-Ex-Proof-Mobile-Phone-
fig-1

LOUDSPEAKER
FUNCTION KEY RED: Optional function, e.g. SOS – function can be assigned via Button App (system integrated).
FRONT CAMERA
16-PIN ISM INTERFACE: Connection for approved accessories. Also see section “Connecting approved accessories”.
SIDE KEY RIGHT: Optional function, e.g. camera – function can be assigned via Button App (system integrated).
MICROPHONE
USB INTERFACE: Connection for the USB-C Cable or for other equipment approved by i.safe MOBILE GmbH. Also see sections “Charging” and “Connecting approved accessories”.
LOUDNESS CONTROL: Volume up/Volume down.
SIDE KEY LEFT: Optional function – function can be assigned via Button App (system integrated).
POWER KEY: A long press switches the device on/off. A short press switches the standby mode on/off.
SENSORS: Proximity sensor, light sensor.
EYELET: Eyelet for hand strap.
BACK CAMERA
LED FLASH
NOISE CANCELLING: Noise cancelling microphone.
LOUDSPEAKER: Loudspeaker for hands-free function.
BATTERY
CHARGING CONTACTS

PREPARATION

The device has a card holder with a slot for a nano-SIM card and with a slot for a microSD card up to 128 GB.

i-safe-MOBILE-M540A01-IS540-2-Ex-Proof-Mobile-Phone-
fig-3

Carefully pull the card holder out of the card slot.
Insert the SIM card into the nano-SIM card slot (1) with the gold-coloured contacts facing down.
Insert the microSD card into the slot provided (2) with the gold-colored contacts facing down.
Carefully slide the card holder into the card slot.
Place the battery in the battery compartment.
Hand-tighten the screws using the Torx Screwdriver provided.
Check that the battery is seated correctly and securely.

Activate eSIM

The device has a nano-SIM card slot and an additional eSIM. The eSIM is a non- removable, integrated digital SIM. eSIM is not supported by all mobile service provider. You can activate the eSIM in several ways:

Via the Android™ Setup Wizard during initial device setup:
- Scan the eSIM QR code that you have received from your service provider or manually enter the eID that you have received from your service provider.
Via the settings menu of the smartphone:
- Settings > Network & Internet > Mobile network (add Network) > Download SIM > scan (or manually enter) eSIM QR code that you have received from your service provider.

SWITCHING ON

Press and hold the on/off key for about 3 seconds.
When turning on the device for the first time, follow the instructions on the screen.
Enter the device or SIM PIN when the input dialog for the device or SIM PIN appears after switching on.
If you have inserted two SIM cards, select a favorite card. Information on operating the device can be found at www.isafe-mobile.com/en/support/service under the menu item “FAQ“.

CHARGING

Only charge the device outside of explosion hazardous areas.
Only charge the device using the USB-C Cable supplied or other charging equipment approved by i.safe MOBILE GmbH.
Do not charge the device in the vicinity of flammable substances.
Only charge the device at ambient temperatures between 0 °C to +45 °C (+32 °F to +113 °F).
Charge the device under dry indoor conditions only.
Do not charge the device in environments dusty or humid.
Connect the adapter suitable for your country to the power supply unit.
Connect the USB-C Cable to the power supply unit.
Connect the USB-C Cable to the USB interface of the device.

CONNECTING APPROVED ACCESSORIES

Only connect accessories approved by i.safe MOBILE GmbH to the device. Accessories approved by i.safe MOBILE GmbH can be found at www.isafe-mobile.com/en/products
Connect approved accessories to the 16-pin ISM interface of the device only outside of explosion hazardous areas.
Never open the cover of the 16-pin ISM interface in explosion hazardous areas.
Operate approved accessories in explosion hazardous areas only on the 16-pin ISM interface of the device. Wired connections via the USB interface are prohibited.
Connect the plug of the accessory securely to the 16-pin ISM interface of the device and check that the plug is seated correctly and securely before entering explosion hazardous areas.
Only remove approved accessories from the 16-pin ISM interface outside of explosion hazardous areas.
Close the 16-pin ISM interface with the cover provided when you are not using accessories.
Only use USB interface outside of explosion hazardous areas.
Never open the cover of the USB interface in explosion hazardous areas.

Approved accessories can be connected to any 16-pin ISM interface and to the USB interface.

i-safe-MOBILE-M540A01-IS540-2-Ex-Proof-Mobile-Phone-
fig-4

Loosen the screw on the 16-pin ISM interface cover using the Screwdriver included in the approved accessory package. Remove the cover as shown.
Connect the plug of the approved accessory to the 16-pin ISM interface as shown.
Hand-tighten the screws.
Check that the plug is seated correctly and securely.
The USB interface is used for charging and data transfer.
Connect approved accessories or other devices to the USB interface only by using the USB-C Cable or by using other equipment approved by i.safe MOBILE GmbH.

MAINTENANCE/REPAIR

Contact the i.safe MOBILE GmbH repair service at www.isafe- mobile.com/en/support/service if the device is not working normally, if the device needs to be repaired or if a replacement part is required.

RETURN SHIPMENT

Contact the i.safe MOBILE GmbH repair service at www.isafe-mobile.com/en/support/service

CLEANING

Turn off the device before cleaning.
Do not charge the device while cleaning.
Do not use chemical agents for cleaning.
Clean the device and the Power Adapter with a soft, moistened antistatic cloth.
Clean the display screen regularly with a soft, antistatic cloth.

STORAGE

Store the device at a humidity of 10 % to 60 % at the following ambient temperatures:
- Up to one month: -20 °C to +45 °C (-4 °F to +113 °F)
- Up to 3 months: -10 °C to +35 °C (+14 °F to +113 °F)
- Over 3 months: -10 °C to +25 °C (+14 °F to +77 °F)

If you do not use the device for a longer period of time, note the following:

Switch off the device.
For longer storage without use, charge the device to approx. 50 % to 70 % using the USB-C
Cable supplied or other charging equipment approved by i.safe MOBILE GmbH.
Charge the device every 3 to 6 months to avoid deep discharge.
Store it in a cool, dry place to keep the battery functional.

RECYCLING AND TRADEMARKS

DO NOT throw away batteries with household waste.
Always dispose electronic products, batteries and packaging material at the appropriate collection points. This way, you prevent uncontrolled waste disposal and promote the recycling of material resources.

You can obtain further information from regional waste disposal companies, state authorities or the i.safe MOBILE GmbH service centre responsible for your country or region at www.isafe-mobile.com/en/support/service

TRADEMARKS

i.safe MOBILE GmbH and the i.safe MOBILE GmbH logo are registered trademarks of the i.safe MOBILE GmbH.
Comes with the Google™ app and Google Chrome™
Google and Google Chrome are trademarks of Google LLC.
Android is a trademark of Google LLC.
All other trademarks and copyrights are the properties of their respective owners.