SEALEY MK51.V4 Stand Panel Door Wing Bonnet and Bumper Instructions
- June 13, 2024
- SEALEY
Table of Contents
PANEL STAND – DOOR, WING, BONNET & BUMPER
MODEL NO: MK51.V4
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instructions
1. SAFETY
Only use on firm, level, unobstructed surfaces which are capable of
supporting the stand and body panels.
DO NOT overload.
Always load evenly with the centre of gravity of the load as near the centre
as possible.
Apply the brakes before commencing work.
DO NOT stand/ride on the stand, or allow others to do so.
Replace or repair damaged parts. Use only recommended parts. Unauthorised
parts may be dangerous and will invalidate the warranty.
WARNING! Failure to comply with these instructions may result in loss of
load, damage to the stand or other property and/or personal injury.
WARNING! The warnings, cautions and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that
may occur. It must be understood that common sense and caution are factors
which cannot be built into this product, but must be applied by the operator.
2. INTRODUCTION
Features fully adjustable arms to fit many styles of bonnets, wings, doors and bumpers. Main frame can adjust through 180° to give required angle. Fitted with two fixed Ø180mm wheels and two braked Ø100mm castors for manoeuvrability.
3. SPECIFICATION
Model No: ………………………………………… MK51.V4
Overall Arm Width: ………………………….. 890mm
Max Capacity: ……………………………………. 40kg
Base Dimensions (W x D): ………………… 980 x 700mm
4. ASSEMBLY
Assemble panel stand according to the parts diagram attached.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.| REGISTER
YOUR
PURCHASE HERE
---|---
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice. Please note that other versions of this product are available.
If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or
01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500 sales@sealey.co.uk
www.sealey.co.uk
© Jack Sealey Limited Original Language Version MK51.V4 Issue 2 (H,3,F) 11/08/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>