QLT Rechargeable Air Compressor Bicyle Pump User Manual
- June 10, 2024
- QLT
Table of Contents
QLT Rechargeable Air Compressor Bicyle Pump User Manual
INSTRUCTIONS FOR OPERATING THE AIR COMPRESSOR/PUMP
Car power input: 12V 5A| Air efficiency:Charge 1.95 mountain bike tires for 2
minutes
---|---
Input voltage: Charger 5V/1A| Battery capacity: 2000 mAh 11.1V
Working current:1-5A| Emergency lighting:80 lumens last for 10 hours
Max current: CSA| Working temperature: -20 ‘ C – 70’ C
NO-LOAD current: -CA| Charging method : Micro USB
Charging time:About 2 hours| Product size:250’56’47MM
Reachable pressure : 150PSI/10.3BAR/990KPA/10.5KG/CM
TWO POWER SUPPLY OPTIONS
- Wireless: fully charge the device by using cable.
- Wired: connects to a usb outlet to provide power directly, not to charge.
- Use the appropriate adapter to inflate your desired object. (various adapters included)
- You can turn the lights on and off by pressing the “U” button when the power is on.
INSTRUCTIONS
For car, motorbike, electric vehicles, bicycles.
Long press the button to turn on the air compressor. Check if the air pressure
value is zero, confirm if the set value is a reasonable air pressure value for
the inflatableobject, otherwise reduce the set air pressure value. screw the
nozzle into the air hole of the air pump and put the appropriate adapter on
it. Start inflating, the inflating stops automatically when it reaches the set
value.
INSTRUCTIONS
For inflating balls, rubber rings, air mattresses and other inflatable
items.
Long press the button to turn on the air compressor. Check if the air pressure
value is zero, confirm if the set value is a reasonable air pressure value for
the inflatable object, otherwise reduce the set air pressure value. screw the
nozzle into the air hole of the air pump and put the appropriate adapter on
it. Start inflating, the inflating stops automatically when it reaches the set
value.
TOLERANCE
Pressure tolerance exists with all available air pumps in the market This
tolerance can be caused by :
- weather temperature
- tightness of air belt and attachment connection Occurring problem
set 2.0 Bar, stop at 1.7 Bar Solution
set 2.3 Bar, or connect tyre and valve properly
NOTES
- Keep children and animals away from this air pump! This pump is not a toy. Therefore, never leave the pump alone in the presence of children or animals.
- Never use this air pump near flammable or explosive liquids and gases (especially the petrol station!).
- Do not leave while operating the air pump (inflating).
- it is normal for the device to become hot, Use the pump for about 8 – 10 minutes max, then stop for about 10 minutes and you can use it again after these 10 minutes.
- In case of abnormal noise or excessive temperature during inflation, immediately switch off the unit and let it cool down for at least 15 minutes. See for yourself what the problem could be. Please be careful to avoid accidents as the machine may still be hot.
- If the air pump is not used for a long time, store it in a dry and closed place. If you have stored it for a long time, it is recommended to charge the battery once every three months.
- Before using the air pump, make sure it has sufficient capacity for the first time you use it. Therefore, we recommend charging it for at least 4 hours.
- Charge the product for 2-3 hours before using it for the first time. Please charge when the device is turned on, the indicator with turn from red to green, which means it is fully charged.
22C79/22000
H.A.C BV
1183AT 7 Amstelveen
The Netherlands
www.hollandasia.com