KaiKuTek Sonash cks 2 Bone Conduction Headphones Instructions
- October 27, 2023
- KaiKuTek
Table of Contents
Bone Conduction Headphones
C=0 M=0 Y=0 K=0
PANTONE Process Black C
PANTONE P 179-8 C
PANTONE P 179-1 C
(2cm · 1cm)
- Magnetic Charging Port
- Hand gesture recognition area located on the right hand side with
- Microphone
- Increase Volume
- Decrease Volume
- On / Off Button
- LED Indicator
Turn On/Off and Charge
| Function | LED Indicator |
|---|---|
| Turn On | Press and hold the button for 3 seconds |
| Turn Off | Press and hold the button for 5 seconds |
| Charging | Solid Red LED |
| Fully Charged | Red LED turns off |
| Pairing Mode | Alternating red blue LED flash quickly |
(Multipoint)
Pair, Multipoint Connection
PAIR
(1) Start with your headphones powered off. Press and hold the button for
3 seconds to enter pairing mode.
(Alternation red/blue LED flashes quickly)
(2) Turn on Bluetooth in your phone and select “Dashbon SonaShocks 2” to
connect.
Multipoint (One SonaShocks 2 simultaneously connects to two different phones)
(1) After successfully pairing with Phone A, disable Bluetooth on Phone
A.
(2) Enable Bluetooth on Phone B and Pair with SonaShocks 2.
(3) Enable Bluetooth on Phone A and click on “Dashbon SonaShocks 2” to
manually connect it.
Listen to Music
| Command | Tap/Click Action | Gesture Action |
|---|---|---|
| Play/Pause | Press button | Wave your hand at the sensor twice |
| Previous Track | Press and hold the button for 2 seconds | |
| Next Track | Press and hold the button for 2 seconds | |
| Enable Gesture Audio Control | Tap your hand at the sensor twice | |
| Increase Volume | Press button | Tap your hand at the sensor twice |
| Decrease Volume | Press button | Wave your hand at the sensor twice |
Answer the Phone
| Command | Tap/Click Action | Gesture Action |
|---|---|---|
| Answer/End Call | Press button | Wave your hand at the sensor twice |
| Reject Call | Press and hold the button for 2 seconds | |
| Enable Gesture Audio Control | Tap your hand at the sensor twice | |
| Increase Volume | Press button | Tap your hand at the sensor twice |
| Decrease Volume | Press button | Wave your hand at the sensor twice |
| Siri/Google | Press and hold the button for 2 seconds |
IP67 Water-Resistant
Bluetooth 5.3
16mm Bone Conduction Transducers
Open-Ear Design
6 Hours of Music & Calls
| mmWave Gesture Recognition Technology
State-of-the-Art Gesture Recognition Technology
Sound Leakage Reduction Technology
Running Hiking
Cycling Driving
www.dashbon.com
Made in China / Black
Model : DBBHA522
Serial No : SB09AAS281B001001
True Wireless Stereo Earbuds
EAN Code
SB09AAS283B001001
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.