EXCITRUS PDW30100 NitroCharge 30 Wireless Power Bank User Guide

EXCITRUS PDW30100 NitroCharge 30 Wireless Power Bank

What’s in the box

Explanation of Parts

Display Window

• The battery level is shown from 0-100% in Display Window.
• A single digit number of the battery level blinks when NitroCharge 30 is being recharged.
• appears in Display Window while NitroCharge 30 charges a device in high-speed.(Power Delivery or Quick Charge)
• blinks when NitroCharge 30 is wireless charging a device.
• stays lit when NitroCharge 30 charges a device in Normal Mode.
• blinks when NitroCharge 30 charges a device in Bluetooth Device Charging Mode.

Basic Usage

Start charging
Press Mode Button to start charging the connected device with EXCITRUS charging cable.
Check the battery level
Press Mode Button to see the current battery level in Display Window.
Check the charging status
Display Window shows charging speed status, battery level and current charging mode.

Sleep Mode

• No action for 30 seconds turns into Sleep Mode and Display Window turns off.
• Pressing Mode Button wakes up NitroCharge 30 from Sleep Mode_

Turn off
Press and hold Mode Button for 3 seconds to turn off NitroCharge 30.

Charging Devices

NitroCharge 30 USB-C output supports Power Delivery 3.0 protocol so it charges the Power Delivery supported devices in high speed, such as the recent MacBook Air series, Microsoft Surface series, iPad Pro series, iPhone 11 series, Nintendo Switch, etc. It also supports Quick Charge 3.0 protocol to charge Quick Charge supported devices in high speed.

• Connect the digital device(s) and NitroCharge 30 with original cable and then start to charge.
• The maximum charging power is 33W, the real time charging power output varies in different charging configurations.
• When multiple devices are charged together, the charging speed of each socket is adjusted lower and the total output becomes up to 25W.

Charging Laptops

• Connect the Laptop to USB-C socket of NitroCharge 30 to charge in the high speed.
• Use EXCITRUS 3A USB-C TO USB-C Cilble in the package for the best charging performance.
• Some laptops may not be charged, especially when multiple devices are charged together, the reasons may vary but usually this happens when the device doesn’t support variable voltage of Power Delivery protocol.
• some laptops may have USB-<: sockets but do not accept USB-C charging. In case laptop cannot be charged by USB-C port, please contact laptop manufacturer.
• Laptops with greater than 30W USB-C input power specification may require longer charging time.

NOTE: “laptop” means portable laptop computers, including recent Mac Book series or Windows computers that come with USB-C charging capability.

Apply Magnetic Metal Sticker

Magnetic Metal stickers inside phone case helps phone positioning when wireless charging.

• Select the size of positioning card according to your phone size (keep/tear off the dotted area).
• Place this positioning card in the middle of the phone case with the side facing up.
• Stick the magnetic metal stickers on two positioning holes;
• Remove the positioning card after finishing sticking.

Wireless Charging (for enabled devices)

• Press Mode Button on NitroCharge 30.
• Center device on NitroCharge 30.
• blinks when charging begins.

Bluetooth Device Charging Mode

Bluetooth Device Charging Mode is a special mode for charging Bluetooth headphones or smart watches, which require low input power.

• Connect Bluetooth headphones or smart watches to USB-A / USB-C socket of NitroCharge 30.
• Enter into Bluetooth Device Charging Mode by pressing twice on the Mode button.’%” symbol blinks in the mode.
• Return to Normal Mode by pressing twice on the Mode button. Or it will automatically turn back to Normal mode in 3 hours, and”%” symbol stops blinking in Normal Mode.

Recharging NitroCharge 30

• Connect the provided USB-C to USB-C or USB-C to USB
• A cable into USB-C socket of NitroCharge 30.
• Connect other end of cable to a power source. 30W {or greater) USB-C type charger is recommended to charge NitroCharge 30 at the highest recharging speed.
• Last digit number of the battery level blinks while NitroCharge 30 is being recharged.

Product Specification

Model                   PDW30100 (NitroCharge 30)

Capacity 10,000mAh I 37WH

Battery Lithium Polymer Battery

MAX30W

USB-C Input 2□V-1.SA, 15V-2A, 12V-2.SA, 9V/SV=3A

MAX3’3W

USB·C Output 20V=1.SA, 1SV=2A.12V=2.SA

9V/5Vm3A

PPS: 3.3V-11V-3A

USB·A Output MAX1BW

12Vm1.SA. 9Vm2A5Vm3A

Wireless Output MAX10W

Attention

• Do not throw, drop or physically damage the product for safety.
• Do not place in a closed or sealed place.
• Avoid storage in high humidity, high temperature or exposure to fire.
• Do not expose the product to direct sunshine or liquids.
• Please keep the input and output ports clean.
• Make sure people who are inexperienced or mentally and physically disabled do not use the product unless they are offered appropriate supervision or guidance.
• Keep the product out of the reach of children.

Note
Before using the product. please read this user guide carefully.

• Use of a power supply or charger not recommended by EXCITRUS may result in a risk of fire or injury to persons.
• To give your NitroCharge 30 the fastest, safest recharge, use a compatible EXCITRUS USB-C PD charger.
• To preserve battery NitroCharge 30 lifespan, use and recharge at least once every 3 months.
• Please remove the cable once the power bank is fully charged.
• Please keep the power bank in a cool and dry place.
• Do not place or use the power bank at high temperature or in sealed or humid environment.

IMPORTANT SAFETY INSTRUCTIONS

WARNING – When using this product, basic precautions should always be followed, including the following:

• Read all the instructions before using the product
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose power bank to rain or snow.
• Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons.
• Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
• Do not use the ixiwer bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
•  Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
• Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause explosion. The temperature of 100°( can be replaced by the temperature of 212°F.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.

FCC compliance statement

This device complies with Part 1 s of the FCC Rules. Operation is subject to the following two conditions: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician  for help

ISED compliance statement
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>