SKYLOONG GK108 108 Keys Mechanical Keyboard Kit User Manual

108Keys series RGB USB Wired / USB+Bluetooth 2 mode
Wired item:GK108/SK108
U+B 2mode item:GK108S/SK108S
User Manual

• NOTE: Press Fn with the function keys.
• One of the blue LED is flashing,The keyboard is connecting the BT equipment.
  Bluetooth ON/OFF switch,Link to USB mode.
  fn function description (Double-click EN to light FN’s white LED.EN function is held,click EN again to escape from holding status).

Define mode

customize your own personality keyboard by the following 4 modes. Onboard mode 1/2/3 Is strongly recommended,(Nc4e In the custom mode, except FN key. other keys can be redefined key values. some of the FN + “x ” function can be also modinedexcept the backlight ,bluelooth and system control The FN button Can not be moved. but user can define your own FNX at any key in the custom mode.
FN + 6^ Onboard mode1 WIN mode| (1) FN + 6^ onboard mode layer 1, ” 6^” lights white LED, no need to run and conned the driver The keyboard works in the custom key functions and user can modify the key functions and macro Settings by the driver and these Settings can be downloaded and saved to the keyboard The reference setting WIN mode setting to reahze the habitual operation of win users
FN + 7& Onboard mode 2 MAC OS mode| (2) FN + 7& onboard mode layer 2. ” 7&” lights white LED. The reference Setting keyboard of MAC OS, the scontrol,option,command’ Onboard model key will be In the original position. user can modify the Settings by the MAC OS mode driver, download and save to the keyboard , no need to run and connect the driver when use the Mac’s function settings. Press FN + 7& again, back to the standard mode.
Driver mode| Dnve mode. Keyboard needs to be run and connected the driver in USB wired mode when realizes key function and light effects some special function(for example You may assign a macro of more than 32 bytes to a key In the driver mode while its unavailable In those onboard mode layer) You must need keep the dnver running and the keyboard connect with the driver.
FNX setting Onboard nodo3| FNX setting. If you don’t like the PH position and FN combination key function, you can set your own FNX position and FNX combination key function, some suecol function keys. or combination keys. cv macro keys those settings of this mode can be called by the FNX key in bayed& layor2. as settings in these mode can bo modified and saved to the keyboard

Backlight settings

(Can not modify)

Bluetooth settings

(Only for bluetooth modexon nol modify)

Link to USB mode or the last BT equipment
FN + 1!| 1| Long press The red&green LED of 1! keycap will flash, The 1 bluetooth equipment can be paired.
Press: The keyboard will conned the 1 BT equipment or disconnect
FN + 2@| 2| Long press The red&green LED of 2@keycap will flash, The 2 bluelooth equipment can be paired.
Press. The keyboard will connect the 2 BT equipment or disconnect
FN + 3#| 3| Long press. The red&green LED of 314 keycap will flash, The 3# bluetooth equipment can be paired
Press: The keyboard will connect the 3 BT equipment or disconnect
Note: It the Bluetooth pairing timed out or faded, please re-pair, if the bluetooth painng Is successful on the equipment, but the keyboard can not work still, Please delete this keybonrd in the Bluetooth list, Turn off bluetooth of your PC or Mobile , restart the keyboard, and re-poor.

System Control

(Cannot modiry)

FN + | Mechanical dual model senes long press for 3 seconds to on/off !he keyhnard
---|---
FN + 4 | On/Off the charging Indicator, low voltage alarm the wired version does not have this function.
FN + PrScr| Keyboard’s sleep time setting, while LED ono never sleep 1:5 minutes, 2:10 minutes……………9:45 minutes to sleep.

Fn function

(Reference Settings, can be modified by dnver)

From The community, For The community!
Created from Basic User

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>