SKYLOONG GK75S RGB USB Bluetooth 2.4G 3 Modes Keyboard User Manual
- June 9, 2024
- SKYLOONG
Table of Contents
GK75S RGB USB Bluetooth 2.4G 3 Modes Keyboard
User Manual
Mode switch function
Switch 1 | Switch 2 |
---|
2.4g receiver
Backlight Settings (can not modify)
Key | Function | Key | Function |
---|---|---|---|
FN + 9( | Backlight ON/OFF | FN + | Backlight brightness — |
FN + 0) | Light effect pause/play | FN + | Backlight brightness + |
FN + — | Backlight mode 1-5 | FN + | Backlight Effect Speed — |
FN + =+ | Backlight mode 6-9 | FN + | Backlight Effect Speed + |
FN + Home | End | FN + Backspace | Del |
--- | --- | --- | --- |
FN + Del | Insert | FN + Win | Lock/Unlock Win key |
FN + Pgup | Pgdn | FN + 4$ | Turn off/on the charging indicator low voltage |
alarm
FN + L-Ctrl| Backlight and wirless sleeping time setting, LED on F1 : 5
minutes, F2:10minutes F9:45minutes, F10 never sleep.
Wirless Contrion
Key | Function |
---|---|
FN + 1! | Long press: The red&blue LED of 1! keycap will flash, The *1 |
bluetooth equipment can be paired. | Press: The keyboard will connect the *1 BT |
equipment or disconnect.
FN + 2@| Long press: The red&blue LED of 2@ keycap will flash, The 2
bluetooth equipment can be paired.| Press: The keyboard will connect the 2 BT
equipment or disconnect.
FN + 3#| Long Press: for 3 seconds into 2.4 g equipment, enter the search
device the red & green LED of 3# keycap will flash, pairing search time is 20
seconds, the keyboard with dongle can be paired,the keyboard will connect
while 3# light green LED, 2 seconds into current light effect, the code has
been successfully matched and can be used directly.
Press: 2.4 g mode. Or disconnect 2.4g, into USB or bluetooth mode If no any
other connect, keyboard will go to sleep.
FN + Space| In BT or 2.4g mode, Plug USB cable can quickly switch USB mode and
wireless mode, easy to connect between multiple devices, It does not respond
if there is no USB connection.
Note: If the Wirless pairing timed out or failed, please re-pair; if the
bluetooth pairing is successful on the equipment, but the keyboard can not
work still, Please delete this keyboard in the Bluetooth list, Turn off
bluetooth of your PC or Mobile , restart the keyboard, and re-pair.
Knob function (6 PCS switches can be replaced to knobs,Install one knob by default)
Standard Knob Settings
- Turn left : Volume —
- Turn right : Volume +
- Press: Mute 4.
Knob function can be modified by the driver e.g.picture zoom in and zoom out
- Turn left: Zoom —
- Turn right: Zoom +
- Press: ESC
Mode function settings (User can modify the settings by the driver,download and save to the keyboard.)
Key| Win mode(Win mode can modify on layer 1)| Mac mode (Mac mode can modify
on layer 2)|
---|---|---|---
F1| Fl| | Screen brightness — for Mac| (FN+F1=F1)
F2| F2| | Screen brightness + for Mac| (FN+F2=F2)
F3| F3| | for Mac| (FN+F3=F3)
F4| F4| | for Mac| (FN+F4=F4)
F5| F5| | One click call Siri for Mac| (FN+F5=F5)
F6| F6| | Screenshot for Mac| (FN+F6=F6)
F7| Previous| (FN+F7=F7)| Previous| (FN+F7=F7)
F8| NI Play/Pause| (FN+F8=F8)| Play/Pause| (FN+F8=F8)
F9| Next| (FN+F9=F9)| Next| (FN+F9=F9)
F10| Mute| (FN+Fl 0=F1 0)| Mute| (FN+F10=F10)
F11| Volume —| (FN+F11=F11)| Volume —| (FN+F11=F11)
F12| Volume 4-| (FN+F12=F12)| Volume +| (FN+F12=F12)
| Ctrl| | control|
| Win| | option|
| Alt| | command|
| Alt| | command
A control
| Ctrl|
Win Driver download address:
http://www.jikedingzhi.com/downloadlist?driverID=41
Mac APP download address:
http://www.jikedingzhi.com/downloadlist?driverlD=90
Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>