speechi SPE-CAM-VX-001 UHD Auto Tracking Camera

Product Information

• Product Name : SPE-CAM-VX-001 Camera
• Manufacturer : Unknown
• Copyright : All contents of this manual, whose copyright belongs to our corporation, cannot be cloned, copied or translated without the permission of our corporation.
• FCC Notice : This product complies with Part 15 of the FCC Rules. The operation is subject to certain conditions to prevent harmful interference.
• Class A ITE : This product falls under Class A ITE category which satisfies Class A ITE limits but not Class B ITE limits. Operating this equipment in a residential environment may cause radio interference.
• European Community Compliance Statement : This product is confirmed to comply with the requirements set out in the Council Directives on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility Directive 2014/30/EU.

Product Usage Instructions

Safety Precautions

• During installation and operation, strictly observe all electrical safety regulations of the country and region of use.
• Use only the power adapter provided with the product. Do not connect multiple devices to the same power adapter as it may exceed its capacity and cause heat generation or fire.
• Do not rotate the camera by hand to avoid mechanical failure.
• When installing the product on a wall or ceiling, ensure that it is securely mounted and there are no obstacles within the rotation range.
• Do not power on the device until all installations are completed.
• Maintain smooth ventilation around the device to prevent heat build-up.
• If the device emits smoke, smells, or makes unusual noises, immediately turn off the power and unplug the device.

Quick Start

1. Ensure that all safety precautions are followed.
2. Refer to the packing list to ensure all components are present.
3. Follow the instructions provided in the user manual for installation and setup.
4. Access the GUI settings to configure various features and settings.
5. Access the web settings to control and customize camera settings.

About Product
The product is a camera with various features and settings that can be configured through the GUI and web settings

Features
The product offers the following features

• Feature menu
• Feature exposure
• Feature color
• Feature image
• Feature P/T/Z (Pan/Tilt/Zoom)
• Feature noise reduction
• Feature setup
• Feature communication setup
• Feature restore default

Specifications
The product specifications include

• Interface and switch details
• Dimensions of the camera
• Installation instructions
• Remote control capabilities

GUI Settings
The GUI settings allow users to configure various features and settings of the camera. The available options include

• Feature menu
• Feature exposure
• Feature color
• Feature image
• Feature P/T/Z (Pan/Tilt/Zoom)
• Feature noise reduction
• Feature setup
• Feature communication setup
• Feature restore default

Web Settings
The web settings provide control and customization options for the camera. The available settings include

• Accessing the camera
• Controlling the camera
• Video settings
• Image settings
• Audio settings
• System settings
• Network settings
• Device information
• Downloading the upgrade program

Troubleshooting
If you encounter any issues with the camera, refer to the troubleshooting section of the user manual for assistance.

Copyright
All contents of this manual, whose copyright belongs to our corporation, cannot be cloned, copied or translated without the permission of our corporation.

Notice
Product specifications and information which were referred to in this document are for reference only. We may change, delete, or update any content at any time and without prior notice.

FCC Notice (class A)

This product complies with Part 15 of the FCC Rules.

The operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the quipment and receiver.
• Connecter the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.

Class A ITE
Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits. Such equipment should not be restricted in its sale but the following warning shall be included in the instructions for use
Operating this equipment in a residential environment may cause radio interference.

European Community Compliance Statement (Class A)

This product is herewith confirmed to comply with the requirements set out in the Council Directives on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility Directive 2014/30/EU.

Safety Precautions

• During the installation and operation, all electrical safety regulations of the country and region of use must be strictly observed.
• Please use the power adapter that comes standard with this product.
• Do not connect multiple devices to the same power adapter (exceeding capacity of the adapter may generate excessive heat or cause fire).
• Do not rotate the camera by hand, otherwise it may cause mechanical failure
• When installing this product on a wall or ceiling, make sure the device securely and there are no obstacles within the rotation range ; Do not power on until all installations are completed.
• To avoid heat build-up, please keep smooth ventilation around the device
• If the device smokes, smells, or makes noises, please turn off the power and unplug the power cord immediately, then contact the dealer in time.
• This device is not waterproof, please keep the device dry.
• This product has no user serviceable parts, damage caused by disassembly by the user is not covered by the warranty.

Electromagnetic field at specific frequencies may affect the image quality.

Packing List

Quick Start

1. Please check connections are correct before starting.
2. Connect the supplied adapter to the power connector and then switch the ON/OFF button to ON position. The power indicator on the front panel of the camera turns on.
3. After the camera is powered on, it starts to initialize, right up to the limit position, and then both horizontal and vertical go to the middle position. When the motor stops running, it indicates the initialization is completed.

About Product

Features

Integrated Design
Integrated design, it can output panoramic and feature HD video at the same time.

Intelligent Teaching Tracking
Built-in leading image recognition and tracking algorithm, you can achieve smooth and natural tracking without any auxiliary positioning camera or tracking host. Different cameras can be installed to achieve teacher tracking or student tracking.

Adjustable Viewing Angle
The panoramic lens angle can be adjusted up and down (-15°~+15°), which is very convenient for engineering installation and debugging.

71° Wide-angle Lens + 12x Optical Zoom
High quality 4K wide angle lens with 8 million ultra-high resolution, 12x optical zoom, and horizontal field angle of view up to 71°.

4K UHD
Using 1/2.5-inch high-quality UHD CMOS sensor with effective 8.51 million pixels, it can achieve high-quality images with a maximum resolution of 4K (3840×2160). It is compatible with 1080P, 720P and other resolutions.

Interfaces multiples
Support HDMI and 3G-SDI interface, effective transmission distance of 3G-SDI is up to 150 meters (1080P30). HDMI, NET or 3G-SDI, NET can output two HD digital signals at the same time.

Built-in G-sensor (Optional)
Support automatic image flip function, convenient for engineering installation.

Built-in Microphone
Built in microphone array, omnidirectional pickup, pickup distance up to 6 meters, unique noise suppression algorithm, perfect voice presentation.

Specifications

FEATURE CAMERA|
---|---
Signal System| HDMI: 4K@30fps, 4K@25fps, 4K@29.97fps, 1080P@30fps, 1080P@25fps

SDI: 1080P@30fps, 1080P@25fps

Sensor| 1/2.5”, CMOS ; Effective Pixel : 8.51M
Scanning Mode| Progressive
Lens| 12x, f = 4.4mm~52.8mm ; F1.8~F2.6
Digital Zoom| 16x
Minimal Illumination| 0.5 Lux @ (F1.8, AGC ON)
Shutter| 1/30s~1/10000s
White Balance| Auto, Indoor, Outdoor, One Push, Manual, VAR
Backlight Compensation| Support
Digital Noise Reduction| 3D Digital Noise Reduction
SNR| ≥55dB
Horizontal FOV| 71°~8.2°
Vertical FOV| 42.7°~4.5°
Pan Angle| ±170°
Tilt Angle| ±30°
Pan Speed| 1.61°~75.56°/s
Tilt Speed| 0.44°~15°/s
Image Flip| Support
Image Freeze| Support
---|---
Preset Position| 255
Preset Accuracy| 0.1°

PANORAMA CAMERA|
---|---
Signal System| HDMI: 4K@30fps, 4K@25fps, 4K@29.97fps, 1080P@30fps, 1080P@25fps

SDI: 1080P@30fps, 1080P@25fps

Sensor| 1/2.5”, CMOS ; Pixels effectifs : 8.51M
Scanning Mode| Progressive
Lens Mount| M12
Lens 1| f = 8mm, Horizontal FOV 48°
Lens 2| f = 1.97mm, Horizontal FOV 107°
Minimal Illumination| 0.5 Lux @ (F1.8, AGC ON)
Shutter| 1/30s~1/10000s
White Balance| Auto, Indoor, Outdoor, One Push, Manual, VAR
Digital Noise Reduction| 3D Digital Noise Reduction
Backlight Compensation| Support
Image Freeze| Support
Image Flip| Support

USB FEATURES|
---|---
Operate System| Windows 7/8/10, Mac OS X, Linux, Android
Color System /Compression| YUY2/H.264/MJPEG
Video Format| YUY2 : max to 1080P@30fps

H.264 AVC : max to 2160P@30fps

H.264 SVC : max to 2160P@30fps MJPEG : max to 2160P@30fps

USB Audio| Support
USB video Communication Protocol| UVC 1.1~UVC 1.5
UVC PTZ Control| Support

NETWORK FEATURES|
---|---
Video Compression| H.264/H.265/MJPEG
Video Stream| First/Second/Third/Fourth Stream
First / Second Stream Resolution| 3840×2160, 1920×1080, 1280×720, 1024×576, 720×480, 720×408, 640×480, 640×360
Third / Fourth Stream Resolution| 720×480, 720×408, 640×360, 480×320, 320×240
Video Bit Rate| 32kbps~51200kbps
Bit Rate Control| CBR, VBR
---|---
Frame Rate| 1fps~30fps
Audio Compression| AAC
Audio Bit Rate| 48K, 64K, 96K, 128K
Protocols| TCP/IP, HTTP, RTSP, RTMP(S), ONVIF, DHCP,

Multicast, etc.

INTERFACES|
---|---
Network Interface| 1 x NET: 10M/100M/1000M
Adaptive Ethernet Port, support PoE+
USB 2.0 Interface| 1 x USB 2.0 : Type A
Communication Interface| 1 x RS232 IN: 8pin Min DIN, Max Distance : 30m, Protocol : VISCA/ Pelco-D/ Pelco-P
| 1 x RS232 OUT: 8pin Min DIN, Max Distance : 30m, Protocol: VISCA network use
| 1 x RS485: 2pin phoenix port, Max Distance : 1200m, Protocol : VISCA/ Pelco-D/ Pelco-P
USB 3.0 Interface| 1 x USB 3.0 : Type B
LINE IN Interface| 1 x LINE IN: 3.5mm Audio ; Input Interface
HDMI Interface| 1 x HDMI: Version 2.0
3G-SDI Interface| 1 x 3G-SDI: BNC type, 800mVp-p, 75Ω, Along to SMPTE 424M standard
Power Interface| DC-005/Φ2.0 (DC IN 12V)

GENERAL SPECIFICATIONS|
---|---
Input Voltage| DC 12V/PoE+ (802.3at)
Input Current| 2A (max.)
Operating Temperature| 0°C~40°C
Storage Temperature| -40°C~60°C
Power Consumption| 18W (max.)
Dimension| 200mm x 176.5mm x 165mm
Net Weight| About 1.8Kg

Interface et interrupteur

Dimensions

Installation

Remote Control

KEY DESCRIPTION|
---|---
Standby Key| Press to enter standby mode
Number Keys| To set preset or call preset
Key| Use with other keys
PRESET Key| Set preset : [PRESET] + Number key (0-9)
HOME Key| Confirm selection or press to turn PTZ back to the middle position
(Return) Key| Press to return to the previous menu
ZOOM Keys| SLOW : Zoom In [+] or Zoom Out [-] slowly

FAST : Zoom In [+] or Zoom Out [-] fast

L/R SET Key| Standard : Simultaneously press L/R SET + 1

Reverse : Simultaneously press L/R SET + 2

FOCUS Keys| Auto/Manual/Far-end/Near-end focus
 CAMERA SELECT Keys| Press to select and control the camera

Key| A utiliser avec d’autres touches

---|---
IR Remote Control Keys|

• [ *] + [#] + [F1] : Address 1
• *[] + [#] + [F2** ] : Address 2
• *[] + [#] + [F3** ] : Address 3
• *[] + [#] + [F4** ] : Address 4

 RESET Key| Call the preset position : [RESET] + Number Key (0-9)
PTZ Control Keys| PTZ moved according to the arrow indicates
 MENU Key| Enter or exit OSD menu
 BACKLIGHT Key| Backlight ON/OFF : Press repeatedly to enable or disable the backlight compensation. Note

• Effective only in auto exposure mode
• If there is a light behind the subject, the subject will become dark, press the backlight key to enable the bcklight compensation. Pressa gain to disable this function.

(17) P/T RST (PTZ Reset) Key| Press to preset Pan / Tilt self-test
Shortcut Set| [*] + [#] + [1] :* OSD menu default Englist [] + [#] + [3] : OSD menu default Chinese [] + [#] + [4] : Display current IP address [] + [#] + [6] : Quickly recover the default [*] + [#] + [8] :* Display the camera version [] + [#] + [9] : Quickly set up inversion

*[] + [#] + [MANUAL] :** Restore to default IP address

GUI Settings

Feature menu
Press [MENU] key to display the feature menu on the screen. Use the arrow key to move the cursor to desired item and press the [HOME] key to confirm to enter the corresponding sub-menu.

Feature exposure
Whenin feature menu page, move the cursor to [Exposure] and press [HOME] key to confirm to enter feature exposure page as shown below.

DESCRIPTION DU MENU EXPOSURE

Mode : Auto, Manual, SAE, AAE, Bright.
ExpCompMode : On, Off (effective only in Auto mode).
ExpComp : -7~7 (effective only ExpCompMode item to On).
Backlight : On, Off (effective in Auto mode).
Bright : 0~17 (effective in Bright mode).
Gain Limit : 0~15 (effective only in Auto, SAE, AAE, Bright mode).
Anti-Flicker : Off, 50Hz, 60Hz (effective only in Auto, AAE, Bright mode).

Meter : Average, Center, Smart, Top.|
---|---
Iris : F1.8, F2.0, F2.4, F2.8, F3.4, F4.0, F4.8, F5.6, F6.8, F8.0, F9.6, F11.0, Close (effective only in Manual, AAE mode).
Shutter : 1/30, 1/60, 1/90, 1/100, 1/125, 1/180, 1/250, 1/350, 1/500, 1/725, 1/1000, 1/1500, 1/2000, 1/3000, 1/4000, 1/6000,

1/10000 (effective only in Manual, SAE mode).

Gain : 0~15 (effective in Manual mode).| DRC : 0~8.

Feature color
When in feature menu page, move the cursor to [Color] and press [HOME] key to confirm to enter feature color page as shown as below.

FEATURE COLOR DESCRIPTION

WB Mode : Auto, Indoor, Outdoor, One Push, Manual, VAR.
RG : 0~255 (effective only in Manual mode).
BG : 0~255 (effective in Manual mode).
RG Tuning : -10~+10 (effective only in Auto, One Push, VAR mode).
BG Tuning : -10~+10 (effective only in Auto, One Push, VAR mode).
Saturation : 60%~200%.
Hue : 0~14.
Color Temp : 2500K~8000K (effective only in VAR mode).

Feature image
When in feature menu page, move the cursor to [Image] and press [HOME] key to confirm to enter feature image page as shown as below.

FEATURE IMAGE DESCRIPTION

Luminance : 0~14.
Contrast : 0~14.
Sharpness : 0~11.
Flip-H : On, Off.
Flip-V : On, Off.
B &W-Mode : On, Off.
Style : Default, Norm, Bright, PC.

Feature P/T/Z
When in feature menu page, move the cursor to [P/T/Z] and press [HOME] key to confirm to enter feature P/T/Z page as shown as below.

FEATURE P / T / Z DESCRIPTION

SpeedByZoom : On, Off.
AF-Zone : Front, Top, Center, Bottom.
AF-Sense : Low, Normal, High.
L/R Set : STD, REV.
Display Info : On, Off.
Image Freeze : On, Off.
Digital Zoom : Off, 2x, 4x, 8x, 16x.
Call Preset Speed : 1~24.
Pre Zoom Speed : 0~7.

Feature noise reduction
When in feature menu page, move the cursor to [Noise Reduction] and press [HOME] key to confirm to enter feature noise reduction page as shown as below.

FEATURE NOISE REDUCTION DESCRIPTION

NR3D-Level : Off, 1~9.

Feature setup
When in feature menu page, move the cursor to [Setup] and press [HOME] key to confimr to enter feature setup page as shown as below.

FEATURE SETUP DESCRIPTION

Language : EN, Chinese, Russian.
DVI Mode : HDMI, DVI.
Video Format : 1080P30, 4KP29.97, 4KP25, 4KP30, 1080P25.
HDMI FRAME : Feature, Panorama.
SDI FRAME : Feature, Panorama.
Current Menu : Feature, Panorama.
Video Mode : SDI-3G Mode (LEVEL-A, LEVEL-B).

Feature communication setup
When in feature menu page, move the cursor to [Communication Setup] and press [HOME] key to confirm to enter feature communication setup page as shown below.

FEATURE COMMUNICATION DESCRIPTION

Protocol : Auto, VISCA, PELCO-D, PELCO-P.
V_Address : 1~7 (effective only in Auto, VISCA protocol).
P_D_Address : 0~254 (effective only in Auto, PELCO-D protocol).
P_P_Address : 0~31 (effective only in Auto, PELCO-P protocol).
V_AddrFix : On, Off (effective only in Auto, VISCA protocol).
Net Mode : Serial, Paral.
Baudrate : 2400, 4800, 9600, 38400.

Feature restore default
When in feature menu page, move the cursor to [Restore Default] and press [HOME] key to confirm to enter feature restore default page as shown as below.

FEATURE RESTORE DEFAULT DESCRIPTION

Restore : Yes, No.

Note : GUI menu and device information are subject to change without notice.

Web Settings

Access Camera
Access the camera IP address in the browser (default teacher camera IP: 192.168.100.82; default student camera IP: 192.168.100.92) to pop up the login window, then input username (default: admin) and password (default: admin). After login, it will show as below

Control Camera
All pages include two menu bars

• Real Time Monitoring : Video image displaying with function buttons.
• Parameter Setup : Parameter configurating.

Video Viewing Window
The video viewing window is same as video resolution, the bigger the resolution, the bigger the playing area. Double click the viewing window to show full screen, double click again, to return to initialized size.

Status bar in viewing window shown as below

Full screen switch button.

PTZ Setup

1. Pan and Tilt Control
   The direction arrows and HOME button allow you to manually drive the camera to desired position.

2. Zoom
   Zoom In and Zoom Out buttons allow for wide or narrow view of the space.

3. Focus
   Focus In and Focus Out button allow for fine manual focus adjustment if the camera has any auto focusing problems on difficult object.

4. PTZ Speeds
   Pan speed rate can be set to 1~24, Tilt speed rate can be set to 1~20. Zoom and Focus speed rate can be set to 1~7.

5. PTZ Presets
   When the PTZ turns to the position that you would like to return to later, you can set presets for quick recall.
   Type a number (0~254) into the preset box and click “Set” button to save.
   When the PTZ turn to other position, input the preset number and click “Call” button to turn the PTZ back to the preset position.

6. PTZ/OSD
   Move the cursor to dropdown menu, select and click “OSD” to open the on- screen menu and do menu settings on the interface. When the camera tracking mode is the follow mode, the WEB page cannot display the OSD menu, and the direction keys cannot be controlled.

7. Preview Stream
   Select “Feature” or “Panorama” to preview feature or panorama camera.

Language Selection

Click to select “English”, “Simplified Chinese” or “Russian” to change language of the webpage.

Video Settings

1. Encode Level
   Support mainprofile and highprofile.

2. Encode Codec
   Support H264, H265 and MJPEG.

3. Resolution
   The first/second stream support 3840×2160, 1920×1080, 1280×720, 1024×576, 720×480, 720×408, 640×480, 640×360; The third/fourth stream support 720×480, 720×408, 640×360, 480×320, 320×240. The bigger the resolution, the clearer the image, and the larger the code stream, the more network bandwidth will be taken.

4. Bit Rate
   You can specify the bit rate, the larger of the bit rate, the clearer of the image. The configuration of the bit rate needs to be combined with the network bandwidth. When the network bandwidth is narrow and the bit rate is configured larger, the video stream cannot be transmitted normally, and the visual effect will be worse.

5. Frame Rate
   You can specify the size of the frame rate, the greater the frame rate, the smoother the image, the smaller the frame, the more sense of beating.

6. I Key Frame Interval
   Set the interval between two I frames, the bigger the interval, the slower the response when opening the image for the first time.

7. Bit Rate Control

Two modes for bit rate control

• CBR (Constant Bit Rate): Video coder will be coding according to the preset speed.
• VBR (Variable Bit Rate ): Video coder will adjust the speed based on preset speed to gain the best image quality.

Image Settings

1. Brightness
   • Brightness of image : 0~14 (default value is 7).
2. Saturation
   • Saturation of image : 0~14 (default value is 4).
3. Contrast
   • Contrast of image : 0~14 (default value is 7).
4. Sharpness
   • Sharpness of image : 0~11 (default value is 6).
5. Hue
   • Hue of image : 0~14 (default value is 7).
6. Flip & Mirror
   • Turn On/Off the Flip function.
   • Turn On/Off the Mirror function.

Audio Settings

1. Audio Switch
   Turn On/Off the audio switch.

2. Audio Type Audio type AAC.

3. Sample Rate Sample rate 44.1K or 48K.

4. Bit Rate
   Bit rate 48K, 64K, 96K or 128K.

5. Input Type
   Input type LINE IN or MIC IN.

6. Input Vol
   Select the volume value to control the channel volume.

7. ADTS Options

   • Options: On/Off.

System Settings

1. Reboot
   Click “Reboot” to restart system.

2. Username and Password
   Modify the password of username and guest (only use letters and numbers, the max password length is 32 bits).

Network Settings

1. Lan Settings
   Default teacher camera IP: 192.168.100.82. Default student camera IP: 192.168.100.92. The MAC address cannot be modified.

2. Port Settings A. HTTP Port
   The IP address identifies a network device and multiple network programs can run on the device, each network program uses the network port for data transmission. The port setting on this page is to set up which port the WEB SERVER program uses to transmit. During port mapping, it needs to be consistent with port number (default is 80).

   • B. RTSP Port
     Setup the RTSP port, default is 554.

   • C. TCP Port
     Setup the TCP port, default is 5678.

   • D. UDP Port
     Setup the UDP port, default is 1259.

   • E. Sony Visca
     Sony Visca 52381.

3. RTMP(S) Settings
   Set the MRL of RTMP(S) and select “on”, “off”, “video” and “audio” functions to enable or disable video and audio in the two streams. Click “Submit” to take effect without restart.

4. SRT Settings
   Turn On/Off SRT and set up the SRT mode, SRT Server, SRT port, SRT encryption, SRT Password, SRT Bandwidth Overhead, SRT Variable Latency and SRT streamID.

5. RTSP Settings
   Turn On/Off the RTSP Auth.

6. ONVIF Settings
   Turn On/Off the ONVIF and ONVIF Auth.

7. Multicast Settings
   Turn On/Off Multicast, set up the Multicast Address (default is 224.1.2.3) and Port (default is 6688; 6688 is the multicast port of the first stream and 6690 is the multicast port of the second stream).

8. NTP Settings
   Turn On/Off NTP time sync, Main time show and Sub time show; select the Time Zone; set up the Server address, Time interval and the Time Show Position of the two streams.

Device Information

Download the Upgrade Program
If you need the camera upgrade program, please contact the manufacturer.

Note : WEB interface and device information are subject to change without notice.

Troubleshooting

Image

The monitor shows no image

1. Ensure that the camera power supply is connected, the voltage is normal, and the power indicator is always on.
2. Turn off the power switch to check that the camera is self-testing.
3. Ensure the cable of video platform and TV that in correct connection.

Image jitters after the camera is properly connected

1. Ensure that the camera installation is in stable position.
2. Check that any vibrating machinery or object near the camera.

There is no video image in browser
That do not support IE browser and IE core browser, it is recommended to use Google, Firefox and Edge browsers. The camera video image will be displayed normally.

Unable to access through the browser

1. Using PC to access the network to test that the network access can work properly to eliminate the network fault caused by cable and PC virus until the PC and camera can ping each other.
2. Disconnect the network, connect camera with PC separately and reset the IP address of PC if necessary.
3. Ensure that the IP address, subnet mask and gateway settings is correct.
4. Check that the MAC address is conflicts.
5. Vérif Check that the web port is modified, the default setting is 80.

Forget the IP address or login password

• Default teacher camera IP : 192.168.100.82.
• Default student camera IP : 192.168.100.92.
• Default username: admin.
• Default password: admin.

Control

Remote control does not work

1. Check and replace with new batteries.
2. Ensure that the camera working mode is correct.
3. Ensure that the address key of remote control can match the camera.

Serial port cannot control

1. Ensure that the protocol, address and bit rate of the camera are consistent.
2. Ensure that the control cable is properly connected.

info@speechi.net РT̩l : +33 (0)3 20 34 74 25 Р12 rue de Weppes 59800 Lille РFrance
SAS au capital de 8000 € – SIRET : 44974266700024 – TVA : FR14449742667 – NAF : 5829C

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>