HIKMICRO UD30837B-A Digital Night Vision Monocular User Guide

: June 10, 2024
: HIKMICRO

Table of Contents

HIKMICRO UD30837B-A Digital Night Vision Monocular
Product Information
Product Usage Instructions
FAQ
Introduction
Package Content
Appearance
Install Battery
USB Connection
App Connection
Getting Started
More Operations
Legal Information
FCC
Safety Instruction
Documents / Resources

HIKMICRO UD30837B-A Digital Night Vision Monocular

HIKMICRO-UD30837B-A-Digital-Night-Vision-Monocular-
PRODUCT

Specifications

Model: Digital Night Vision Monocular HIKMICRO CHEETAH LRF Series
Battery Capacity: 3200 mAh
Adapter Diameters: 38 mm, 40 mm, 50 mm, and 62 mm

Product Information

Introduction

The Digital Night Vision Monocular is a versatile device designed for clear target viewing in low-light or dark environments.

Package Content

Lens Cover
Focus Ring
Infrared Light
Laser Range Finder
Battery Compartment
Fixing Ring
Adapter (not included)
Type-C Interface
Buttons for functions and parameters

Appearance

The device features various components including the Lens Cover, Focus Ring, Infrared Light, Laser Range Finder, Battery Compartment, Fixing Ring, Adapter, Type-C Interface, and Buttons for setting functions.

Product Usage Instructions

Install Battery

Charge the 3200 mAh battery for more than 4 hours before first use. Clean the battery compartment cover if dirty for better conductivity.

USB Connection

Connect the device to a power supply or for data transmission using a Type-C cable.

App Connection

Use the app for live view, setting parameters, upgrading the device, accessing albums, capturing snapshots, and recording videos.

Getting started

Android:

Turn on the device and disable the hotspot function.
Connect the device to the power adapter using a Type-C cable.

iOS:

Align and insert the adapter into the clip-on eyepiece.
Secure the adapter by rotating the locking ring clockwise.

Remove Adapter

Rotate the locking ring counterclockwise to loosen the adapter.
Remove the adapter carefully.

Calibrate Image

Select image calibration in the main menu.
Select coordinates and enable the Reference Line function.

Sea Operations

Scan the QR code for detailed user manual instructions.

FAQ

Q: Is the adapter included in the package?

A: Well, the adapter is not included. It needs to be purchased separately if required.

Introduction

HIKMICRO Cheetah LRF Digital Night Vision Monocular performs well under any lighting condition.
Its advanced 2560 × 1440 HD sensor and 1920 × 1080 OLED display are capable of capturing every object in great detail and with rich clarity.
Featuring a specific optical component, it can detect more IR information in fog.

Package Content

The package includes: Device (× 1), Battery (× 2), Type-C Cable (× 1), Lint Free Cloth (× 1), Battery Charger (× 1), Bag (× 1), and Quick Start Guide (× 1).

Appearance

Lens Cover: Protects the lens.
Focus Ring: Adjusts focus to obtain clear targets.
Infrared Light: Helps to view target clearly in a dark environment.
Laser Range Finder: Measures distance with laser.
Battery Compartment: For holding the battery.
Fixing Ring: Holds the clip-on eyepiece in place.
Adapter: Connects to optical lens.
Locking Ring: Locks the adapter with the clip-on eyepiece.
Type-C Interface: To connect the device to power supply or to transmit data with a type-C cable.
Buttons: To set functions and parameters.

Note: The adapter is not included in the package. Please purchsase separately if necessary.

Button Description

Press Laser Key and Wheel at the same time to capture snapshots.

Install Battery

HIKMICRO-UD30837B-A-Digital-Night-Vision-Monocular-
FIG-4

Steps

Rotate the battery compartment cover counterclockwise to loosen and remove it.
Insert the battery as the positive and negative marks indicate.
Rotate the battery compartment cover clockwise until it is tight and locked.

Note:

Remove the battery if you aren’t making use of the device for a long time.
The battery type is 18650 with the protection board. The battery size is 19 mm × 70 mm. The rated voltage is 3.6 VDC, and the battery capacity is 3200 mAh.
Charge the battery for more than 4 hours before first use.
To ensure better conductivity, if the battery compartment cover gets dirty, use a clean cloth to wipe the thread.

USB Connection

Steps

Turn on the device and make sure the hotspot function is disabled.
Lift the type-C interface cover.
Connect the device to the power adapter using a type-C cable to power on the device.

App Connection

Live view
HIKMICRO Academy
Set parameters
Upgrade device
Access albums
Capture snapshots and record videos

Getting Started

Install Adapter

Steps

Align the red dot of the adapter with the red dot of the clip-on eyepiece, and insert the adapter as arrow 1 shows.
Rotate the locking ring clockwise (as arrow 2 shows) to secure the adapter.
- Note: Four diameters of adapters are selectable: 38 mm, 40 mm, 50 mm, and 62 mm.

Remove Adapter

Steps

Rotate only the locking ring counterclockwise, and make sure the device or other parts of the adapter are not rotated or moved.
Plug out and remove the adapter after it is loosen.

Calibrate Image

Steps

Select in main menu, and press the wheel to enter the image calibration interface.
Rotate and press the wheel to select the coordinates, and press the wheel again to switch the X and Y axis.
Rotate and press the wheel to select Reference Line, and press the wheel to enable this function. A horizontal reference line appears in the middle of the view.

More Operations

Scan the QR code to obtain the user manual for more detailed operations.

Legal Information

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
Please find the latest version of this Manual at the HIKMICRO website (www.hikmicrotech.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.

Trademarks Acknowledgement

and other HIKMICRO’s trademarks and logos are the properties of HIKMICRO in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKMICRO MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.
THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ILLEGAL HUNTING ANIMALS, INVASION OF PRIVACY OR ANY OTHER PURPOSEWHICH IS ILLEGAL OR DETRIMENTAL TO THE PUBLIC INTEREST. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
PLEASE FOLLOW ALL THE PROHIBITIONS AND EXCEPTIONAL CAVEATS OF ALL APPLICABLE LAWS AND REGULATIONS, IN PARTICULAR, THE LOCAL FIREARMS AND/OR HUNTING LAWS AND REGULATIONS. PLEASE ALWAYS CHECK NATIONAL PROVISIONS AND REGULATIONS BEFORE PURCHASE OR USE OF THIS PRODUCT. PLEASE NOTE THAT YOU MAY HAVE TO APPLY FOR PERMITS, CERTIFICATES, AND/OR LICENSES BEFORE ANY PURCHASING, SELLING, MARKETING AND/OR USING OF THE PRODUCT. HIKMICRO SHALL NOT BE LIABLE FOR ANY SUCH ILLEGAL OR IMPROPER PURCHASING, SELLING, MARKETING, AND END USES AND ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES ARISING THEREOF. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.
These clauses apply only to the products bearing the corresponding mark or information.

EU/UK Conformity Statement

This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Directive 2014/30/EU (EMCD), Directive 2014/35/EU (LVD), Directive 2011/65/EU (RoHS), Directive 2014/53/EU.
This product and – if applicable – the supplied accessories too are marked with “UKCA” and comply therefore with the following directives: Radio Equipment Regulations 2017, Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety)
Regulations 2016, the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.

Frequency Bands and Power (for CE/UKCA)

The frequency bands and modes and the nominal limits of transmitted power (radiated and/or conducted) applicable to this radio device are the following: Wi-Fi 2.4 GHz (2.4 GHz to 2.4835 GHz), 20 dBm.
Directive 2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.

According to the Waste Electrical and Electronic Equipment Regulations 2013:

Products marked with this symbol cannot be disposed of as unsorted municipal waste in the United Kingdom.
For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
Directive 2006/66/EC and its amendment 2013/56/EU (Battery Directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point.
For more information see: www.recyclethis.info.
According to the Batteries and Accumulators (Placing on the Market) Regulations 2008 and the Waste Batteries and Accumulators Regulations 2009: This product contains a battery that cannot be disposed of as unsorted municipal waste in the United Kingdom. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info.

FCC

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-003 (B)/NMB-003(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference,
this device must accept any interference, including interference that may cause undesired operation of the device.

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.

Laws and Regulations

Use of the product must be in strict compliance with the local electrical safety regulations.

Transportation

Keep the device in original or similar packaging while transporting it.
Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device and the company shall not take any responsibilities
Do not drop the product or subject it to physical shock. Keep the device away from magnetic interference.

Power Supply

The input voltage for the device should meet the Limited Power Source (5 VDC, 2 A) according to the IEC61010-1 or IEC62368 standard. Please refer to actual products and technical specifications for detailed information.
The power source should meet limited power source or PS2 requirements according to IEC 60950-1 OR ICE 62368-1 standard.
Use the power adapter provided by qualified manufacturer. Refer to the product specification for detailed power requirements.
Make sure the plug is properly connected to the power socket.
DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by overload.

Battery

Improper use or replacement of the battery may result in explosion hazard. Replace with the same or equivalent type only. Dispose of used batteries in conformance with the instructions provided by the battery manufacturer.
Use the battery provided by qualified manufacturer. Refer to the product specification for detailed battery requirements.
Make sure the battery temperature is between 0°C to 45°C (32°F to 113°F) when charging.
For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality. Otherwise, damage may occur.
The built-in battery cannot be dismantled. Please contact the manufacture for repair if necessary.
Batteries of improper size cannot be installed, and may cause abnormal shutdown.
The battery cannot be charged with external power source directly.
Confirm there is no flammable material within 2 m of the charger during charging.
DO NOT place the battery near heating or fire source. Avoid direct sunlight.
DO NOT place the battery in the reach of children.
DO NOT swallow the battery to avoid chemical burns.

Maintenance

If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired.
Clean the lens with soft and dry cloth or wiping paper to avoid scratching it.
It is recommended to reboot the device every 2 hours when using it to ensure the device performance.

Using Environment

Make sure the running environment meets the requirement of the device. The operating temperature shall be -30 °C to 55 °C (-22 °F to 131 °F), and the operating humidity shall be 95% or less, no condensing.
Place the device in a dry and well-ventilated environment.
DO NOT expose the device to high electromagnetic radiation or dusty environments.
DO NOT aim the lens at the sun or any other bright light.
When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam, or it may burn out.
Avoid equipment installation on vibratory surface or places subject to shock (neglect may cause equipment damage).

Emergency

If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.

Laser

When any laser equipment is in use, make sure that the device lens is not exposed to the laser beam, or it may burn out. The laser radiation emitted from the device can cause eye injuries, burning of skin or inflammable substances.
Before enabling the light supplement function, make sure no human or inflammable substances are in front of the laser lens. Do not place the device where minors can fetch it.

Manufacture Address

Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou, Zhejiang 310052, China Hangzhou Microimage Software Co., Ltd.
Website: www.hikmicrotech.com
E-mail: support@hikmicrotech.com

Documents / Resources

| HIKMICRO UD30837B-A Digital Night Vision Monocular [pdf] User Guide
UD30837B-A Digital Night Vision Monocular, UD30837B-A, Digital Night Vision Monocular, Night Vision Monocular, Vision Monocular, Monocular
---|---