Speechi SUP-MOB Adjustable Screens Pas Cher User Manual
- June 15, 2024
- Speechi
Table of Contents
Speechi SUP-MOB Adjustable Screens Pas Cher User Manual
Material Lis
- To make sure we use the stand correctly and safely, please read this instruction carefully before installation.
- Apply to 55-86 inch IFP by suggestion.
- Max bearing weight is 100KG.
A-Left stand 1pc
B-Right stand 1pc
C-Wall mount 1pc
D-Tray 1pc
E-Casters 4pcs
F-Brackets 2pcs
Other Accessories (Unit: mm)
Screw| M8×25mm| 14pcs|
---|---|---|---
Spring washer| Ø20×Ø13mm| 5pcs|
Security bolts*| M6×130mm| 2pcs|
Monkey wrench| | 1pc|
Cross screwdriver (user’s owned| | 1pc|
Remark: Due to model difference,”*”indicates optional,please refer to actual
parts.
If the stand is equipped with “F, the quantity of is 14;
If not, the quantity is 10.
Assembly Step
Step 1 : Adjust the casters into braking status, then screw them into the
stands (Figure1).
Step 2 : Lock the wall mount to the side of one stand (Figure 2).
Step 3 : Lock the wall mount to the side of another stand (Figure 3).
Step 4: Lock the tray between two upright stands (Figure 4).
Step 5: Install brackets with your screwdriver (Figure 5).
Step 6: Hang the monitor onto the stand, and tighten security bolts (Figure 6). Make sure they are in brake status, this step needs 2 professional persons to finish.
Step 7 : Refer to the figure below for finshed assembly (Figure 7).
Remark! In some cases, the assembled device couldn’t match the stand, you need to use your own specific wall mount, please refer as below
Screw the suitable wall mount onto the stand
Hang your monitor on the wall mount, and tighten the security bolts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>