veho UF-2 3-in-1 Desktop Station Fan Instruction Manual
- June 13, 2024
- veho
Table of Contents
veho UF-2 3-in-1 Desktop Station Fan
Product Information
The 3-in-1 Desktop Station with model number VUF-002-UF2 is a wireless charging station that is designed to charge various devices. It is FCC compliant and operates under Part 15 of the FCC Rules. The device is equipped with a fan, LED light, charging station, power button, USB-C input, and LED indicator light. The charging station supports different power outputs depending on the device being charged.
FCC Statement **
**
This device complies with Part 15 of the FCC Rules. To minimize interference, it is recommended to reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a different circuit, or seek assistance from a dealer or an experienced radio/TV technician. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
The device meets FCC radiation exposure limits for an uncontrolled
environment. It should be installed and operated with a minimum distance of
20cm between the radiator and the user’s body. This equipment complies with
FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
Supported Devices:
- 15W: Samsung S22 Ultra, Samsung S23, Samsung S23+, Samsung S23 Ultra, Google Pixel 7, Google Pixel 7 Pro, HUAWEI Mate 50, HUAWEI Mate Xs 2
- 10W: Z Fold 4, Z Flip 4, S22/S22 Ultra, S20/S20+/S20 Ultra, S10/S10+/S10e, S9/S9+, S8/S8+, S7/S7 Edge, S6/S6+, Note 10/9/8
- 7.5W: iPhone 14/14 Pro, iPhone 13/13 Pro Max, iPhone 12/12 Pro/12 Pro Max, iPhone 11/11 Pro Max, iPhone Xs/Xs Max, iPhone Xr/X
- 5W: AirPods 3/2/2 Pro/Pro (2nd gen), Galaxy Buds/Buds+/Buds Pro/Buds Live, Pixel Buds, Pixel 4/4XL, LG V50/V40/V30/V30+, LGG7/G8, and all other Qi-certified devices
Important Note:
It is recommended to use a minimum QC 3.0 18W power adapter with the UF-2
to prevent charging intermittency issues.
Product Usage Instructions
- Setting up the UF-2:
- Connect the fan to a compatible power source using the supplied USB-C cable.
- When plugged in, the indicator light will display red, indicating that the wireless charging station is in standby mode.
- Wireless Charging:
- Place your device on the wireless charging area of the UF-2.
- The indicator light will change from red to blue, indicating that the device is being charged.
- Note: To enable fast charging, use a compatible device and ensure that a sufficient power adapter is connected to the UF-2.
Product Description
- Fan
- LED light
- Charging station
- Power button
- USB-C input
- LED indicator light
Setting up the UF-2: Connect the fan to a compatible power source using the supplied USB-C cable. When plugged in, the indicator light will display red to indicate the wireless charging station is in standby mode.
Wireless Charging: Place your device on to the wireless charging area; the indicator will change from red to blue while charging. Note: To enable fast charging you will need to use a Quick Charge 3.0 adapter (not included).
Using the fan
The fan has 3 speed levels; press once for low, press again for medium, and
press again for high. Press a fourth time to turn it off.
Using the LED light :Press and hold the power button to turn the light on. Press and hold again to turn the light off.
Specifications
Input voltage: 5V/3A, 9V/2A
Power output : 15W / 10W / 7.5W / 5W
Charging efficiency : 70% – 80%
Dimensions: “160mm x 110mm x 345mm
EC Declaration of Conformity
Hereby, Veho UK LTD declares that the radio equipment type (VUF-002-UF2) is in
compliance with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at
https://veho-world.com/compliance/
Frequency band(s) – 0.108MHz-0.205MHz Maximum radio-frequency power – 4dBm
Veho Global Group, PO Box 436, Southampton, SO30 9DH, UK Veho Europe, 25 Place
de la Madeleine, 75008 Paris
PROP 65: For more information on PROP 65 & disclaimer visit veho-
world.com/prop65
- This symbol, affixed to the product or its packaging, indicates that the product must not be processed as household waste. This product should be correctly disposed of according to your local guidelines for electrical and battery operated products. Correct disposal of the battery will avoid potential harm to the environment and human health. For further information regarding the recycling of this product, please contact your local waste recycling centre.
Support
Contact Veho for product support via our website at : veho-world.com/product-
support/