zenzee NG 22002 Floor Lamp User Manual

: June 4, 2024
: zenzee

Table of Contents

NG 22002 Floor Lamp
Assembly instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NG 22002 Floor Lamp
**User Manual

FLOORLAMP NG 22002 (SF-3017-B)**

NG 22002 Floor Lamp

Thank you for choosing our ZENZEE floor lamp. Please read this manual carefully to ensure proper functioning and safety. If you have any questions about our product please contact us by email: info@nicegoodz.nl

SAFETY DIRECTIONS / PLEASE READ THIS INFORMATION CAREFULLY BEFORE INSTALLING OR USING THIS PRODUCT. PLEASE KEEP THIS USER MANUAL FOR FURTHER REFERENCE.

The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light NG 22002 (SF-3017-B).
Maintenance of the lights is limited to the surfaces. When doing this, no moisture must come into contact with any areas of the terminal connections or main voltage control parts.
Attention! Before starting the installation work, make sure that the mains power line is voltage-free – turn off the safety cutout or unscrew the protection fuse. The switch must be “OFF”.
The lamp is solely intended for use in interior areas of private households.
The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed of with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic devices. Please ask your local municipality for the point of acceptance.
Do not install the light on a damp or conductive subsurface.
Only the included individual parts may be used; otherwise, any and all guarantee claims will expire.
All included individual parts and attachments must be mounted.
Please make sure that no cables get damaged during the installation work.
Connection type Z: This lamp’s outer flexible cable can not be replaced. In case of any damage, the lamp must be disposed of.
Attention! During operation, lamp parts and illuminants can reach temperatures of more than 60°C. Do not touch during operation!
Do not look directly into the light source (illuminant, LED, etc.).
Please make sure that illuminants have first cooled down before replacing them.
Attention! Always disconnect the power cable or the socket light from the wall outlet before.
Make sure that illuminants are securely fixed during the installation.
The maximum wattage indicated for each lighting unit must not be exceeded.
The lamp may only be adjusted and positioned after having cooled down.
A Minimum distance from the edge of the spotlight to the illuminated surface >= 0.5 m.
Place the lamp on horizontal surfaces only.