BAKER SM-2301 Bluetooth Speaker Instructions
- May 15, 2024
- BAKER
Table of Contents
BAKER SM-2301 Bluetooth Speaker
Specifications
- Product: Bluetooth Speaker
- Battery: Rechargeable 1200mAh built-in battery
- Power Supply: 5V 2A adapter
- Functionality: Speaker and lights
Product Usage Instructions
-
Charging the Speaker:
To charge the speaker and lights, connect a 5V 2A adapter to the power supply. Ensure the built-in 1200mAh battery is charged for optimal performance. -
Operating the Speaker:
To turn on/off the lights, short press the power button. The rhythmic lighting changes according to the music style being played. When the adapter is plugged in, both the lights and speaker functions can be used simultaneously. -
Safety Information:
Ensure that any modifications or changes to the unit are approved by the responsible party to avoid voiding the user’s authority to operate the equipment. Follow FCC Rules and maintain a minimum distance of 20cm between the equipment and your body to comply with radiation exposure limits.
FAQ
-
Q: How do I know when the battery is fully charged?
A: When charging, a full battery is indicated by a solid light or specific LED color change on the speaker. -
Q: Can I use any adapter to charge the speaker?
A: It is recommended to use a 5V 2A adapter for optimal performance and safe charging of the speaker and lights.
Bluetooth speaker
Model: SM-2301
About buttons as below,
- Turn on /off:
- Long press power button for 3 seconds to turn on or off.
- Lights on and breathing , press once to switch modes of lights.
- M Button:
- Long press 3 seconds M button to start or end bluetooth mode,
- Press once to switch FM/TF/USB/AUX mode.
- Previous song:
- Under Bluetooth mode, Short press Vol – switch to previous song,
- Long press to decrease volume.
- Aux mode this button can adjust volume only not support previous song.
- Play / Pause:
- Short press to play or pause. Under FM mode, long press to search radio,
- Press once to Mute.
- Short press to answer the calls,
- Long press to reject or hang up under Bluetooth mode.
- Double press to dial the last call.
- Next Song:
- When Bluetooth mode, short press to play next songs, long press to increase the volume.
- When Aux mode, this button can adjust volume only not support next song
- Lights Mode:
- After power on, the lights is rainbow color and breathing.
- Bluetooth mode, the lights starts from up to down and rotative.
- There’re 7 kinds lights mode under Bluetooth/TF/USB mode, Short press power button to switch it.
- Rainbow color and fast flashing
- RGB color changeable from Up to down
- Single color changeable from Up to down
- Rhythmic changeable start from middle
- Rhythmic changeable from down to up
- Night light mode – it’s an solid orange color on
- Turn off the lights
- Music playing, the rhythmic changeable according to the style of music.
- Short press “power” button to turn off or on the lights.
Charger and Battery:
- It built in a rechargeable 1200mAh battery supplies for speaker and lights only.
- Users need to a 5V 2A adapter connect to power supply and make the work properly.
- When plug in the adapter, The lights, speaker function can be used at the same time.
FCC
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement:
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>