MORRIS MPD-10125 Heat Pump Dryer User Manual

June 1, 2024
MORRIS

MORRIS-LOGO

MORRIS MPD-10125 Heat Pump Dryer

MORRIS-MPD-10125-Heat-Pump-Dryer-PRODUCT

Product Information

  • Specifications
    • Model: MPD-91125, MPD-10125
    • Rated Capacity: 9.0kg, 10.0kg
  • Product Description
    • The tumble dryer model MPD-91125 or MPD-10125 comes with the following components:
    • Power cord
    • Top board
    • Water container
    • Drum
    • Door filter
    • Control panel
    • Door
    • Air inlet
    • Maintenance cover
  • Installation
    • Transport: Risk of injury and damage! Improper handling of the appliance may result in injury. Ensure proper handling during transport.
  • Installation Steps:
    • Ensure the power cord is connected to a suitable power outlet.
    • Place the water container in its designated spot.
    • Install the door filter securely.
    • Connect the drain hose properly as per the instructions provided.
    • If applicable, install any optional accessories like connectors following the instructions provided.
  • Operation
    • To operate the tumble dryer:
    • Load the drum with the laundry to be dried.
    • Select the desired settings on the control panel.
    • Start the dryer according to the user manual instructions.
  • Maintenance
    • Cleaning and Care: Regularly clean the door filter and empty the water container to ensure optimal performance.
    • Troubleshooting: Refer to the troubleshooting section in the user manual for guidance on resolving common issues.

FAQs

  • Q: How can I prevent fire hazards when using the tumble dryer?
    • A: Avoid drying items that have been in contactwith flammable substances like cooking oil, acetone, alcohol, etc. Wash them thoroughly before drying in the tumble dryer.
  • Q: What should I do if the tumble dryer does not operate properly in freezing temperatures?
    • A: Ensure that condensed water does not freeze in the pump and hoses by maintaining proper operating temperatures. Seek professional assistance if needed.

SAFETY INSTRUCTIONS

CAUTION: RISK OF FIRE!
Warning! To prevent any damage to your and others’ life or property, you have to follow the safety notes.

Intended use

  • This heat pump dryer is intended for drying typical amounts of household laundry, which have been washed with water. It has been designed solely for private use and is not suitable for commercial or shared use (i.e. by several families in an apartment building).
  • Use this appliance only as described in this user manual.
  • This appliance is for indoor use only.
  • Any other use is deemed improper and may result in damage to property or even personal injury.
  • The manufacturer accepts no liability for damage caused by improper use.

Safety Instructions

  • The appliance corresponds to protection class I and may only be connected to a plug with a protective conductor that has been installed properly.
  • When connecting the appliance to the mains, make sure that the mains voltage is correct. You can find more information about this on the rating plate.

Warning! Electric shock hazard

  • Before connecting the tumble dryer, ensure that the connection parameter on the rating plate (fuse rating, voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician.
  • The electrical safety of this tumble dryer can only be guaranteed when correctly earthed. This standard safety requirement must be met. If in any doubt, please have the household wiring system tested by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).
  • Do not pull the power cord forcefully. Please grasp the mains plug instead
  • Do not plug/draw the mains plug with wet hands.
  • Do not bend, clamp or damage the power cord and the power plug.
  • If the power cable is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Warning: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.
  • Do not connect the appliance to the mains electricity supply by an extension lead, multi-socket adapter or similar.
  • The accessibility of the plug must always be ensured, to disconnect the tumble dryer from the mains.
  • If the appliance appear high temperature abnormally, please draw the mail plug immediately.

Injury danger

  • The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.
  • Do not disassemble or install the dryer without any instruction or supervision.
  • Do not stack this dryer on the washing machine without stacking kits. (If you want to stack this dryer on a washing machine, please purchase the independent parts. Installation shall be done by the manufacturer, its service agent or similarly qualified persons to avoid any hazards.)
  • Do not lean on the opened door of the dryer.
  • Condensed water is not drinking water. It can cause health problems in both people and animals if consumed.

Damage danger

  • Do not put more load than rated in this user manual. See the related chapter in the user manual.
  • Do not operate the dryer without the door filter.
  • Do not dry the clothes before being spun.
  • Do not expose the dryer directly under the sun.
  • Do not install the dryer in humid and drenching environment.
  • While cleaning and maintenance, please do remember to pull out the power plug and do not directly spray the dryer with water.
  • The appliance should not be overturned during normal use or maintenance.

CAUTION: RISK OF FIRE!

Explosion & Fire danger

  • Please do not dry the clothes with any flammable substances such as kerosene or alcohol. Otherwise, there may be explosion.
  • The appliance contains an environmentally friendly but flammable R290 refrigerant. Keep away from open flame and other sources of ignition.
  • The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
  • Do not dry unwashed items in the tumble dryer.
  • Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
  • Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber-backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
  • Fabric softeners, or similar products, should be used as specified by the fabric softener instructions.
  • Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard.
  • Remove all objects from pockets such as lighters and matches.
  • If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent. This will reduce, but not eliminate the hazard.
  • WARNING: Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
  • Openings must not be obstructed.
  • The lint trap has to be cleaned frequently.
  • Lint must not to be allowed to accumulate around the tumble dryer.

Safety with children

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Children of less than 3 years should be kept away unless continuously supervised.
  • Always close the door after use. In this way you will avoid the danger of:
    1. Children climbing onto or into the dryer or hiding things in it.
    2. Pets or other small animals climb into it.

Correct Disposal of this product:

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Disposal of packaging material

The packaging is designed to protect the appliance from damage during transportation. The packaging materials are environmentally friendly and should be recycled. Recycling the packaging can reduce the use of raw materials in the manufacturing process and the amount of waste in landfill sites.

Model Rated capacity
MPD-91125 9.0kg
MPD-10125 10.0kg

INSTALLATION

Product Description

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(1\) Note: The actual model you purchased might differ. Please see the product you purchased in kind prevail.

Accessories

The following parts are optional for specific models. If your dryer has the following parts, please wear gloves to install them as per the instruction below.

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(3\)

Transport

  • Move cautiously. Do not grasp any salient parts of machine. The machine door cannot be used as the handle for transport. If the dryer can’t be transported erectly, the dryer can be tilted to right less than 30°.

Risk of injury and damage!

  • Improper handling of the appliance may result in injury.
  • The appliance is very heavy. Never transport or carry the appliance alone; always with the assistance of another person.
  • Remove all obstacles on the transport route and from the installation location, e.g. open doors and clear away objects lying on the floor.
  • Do not use the open door as a handhold.
  • Remove all package material before using the appliance.
  • Before setting up the tumble dryer, check it for any externally visible damage.
  • Do not install or use a damaged tumble dryer.
  • Do not install the tumble dryer in a room where there is a risk of frost occurring. At temperatures around freezing point the tumble dryer may not be able to operate properly. There is a risk of damage if the condensed water is allowed to freeze in the pump and hoses.

Installation Position
Warning!

  • Children can become entangled in the packaging film or swallow small parts and suffocate. Do not allow children to play with the packaging.
  • The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.
  • Do not restrict the floor clearance through deep pile carpets, strips of wood or similar. This might cause heat built-up which would interfere with the operation of the appliance.
    1. It is recommended that, for your convenience, the machine is positioned close to your washing machine.
    2. Do not stack this dryer on washing machine without stacking kits. (If you want to stack this dryer on a washing machine, please purchase the independent parts. Installation shall be done by the manufacturer, its service agent or similarly qualified persons to avoid any hazards.)
    3. The tumble dryer must be installed in a clean place, where dirt does not accumulate. Air must be able to circulate freely around the appliance. Do not obstruct the front air inlet or the air intake grilles at the back of the machine.
    4. To keep vibration and noise within minimum level when the dryer is in use, it must be placed on a firm and level surface.
    5. The feet must never be removed.MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(4\)

Level Adjusting

  • Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, adjust the feet by hand or using a tool.

Power Supply Connection

  1. Make sure that the voltage of the power supply is the same as the electric specification.
  2. Do not connect the dryer with the power connection board, a universal plug or socket, and do not use multi-plug adapters and extension cables.

Note!

  • Leave it to stand for 2 hours after transporting. Before first use, please use the soft fabric to clean the inside drum.
    1. Put some clean rags into the drum.
    2. Plug the power, and press 【On/Off 】.
    3. Select the 【Refresh】 Programme, and press 【Start/Pause】 button.
    4. After finishing this programme, please follow the “Cleaning and Care ” to clean the door filter.
  • During drying, the compressor and the water will generate some entirely normal noise.

OPERATION

Quick Start

Note! Before using, make sure the tumble dryer is installed correctly.

Before Drying

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(6\)

Drying

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(7\)

After Drying
Buzzer beep and “End”on display.

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(8\)

Note! If the socket with a switch is used, please press the switch to turn off the power directly.

Before Each Drying

  1. Before drying, thoroughly spin the laundry in washing machine. High spin speed shortens the drying time and saves energy.
  2. For uniform drying result, sort the laundry according to fabric type and select the appropriate drying programme.
  3. Before drying, please close zips, hooks and eyelets, button, tie fabric belts, etc.
  4. Remove all objects from pockets such as lighters and matches.
  5. Sew in or remove underwiring from bras.
  6. Close duvet covers and pillowcases to prevent small items from being rolled up inside them.
  7. Leave jackets open and undo any long zips so that textiles dry evenly.
  8. Do not over dry the clothes, because over-dried clothes can easily get creases.
  9. Do not dry the articles containing rubber or similar elastic materials.
  10. Keep the area around the tumble dryer clean. Coal dust or flour may cause an explosion.
  11. The door shall be opened only after the programme of the tumble dryer is finished to avoid being scalded by hot steam or over heated drying machine.
  12. Clean the lint filter and empty the water container after each use to avoid extension of drying time and increase of energy consumption.
  13. Do not dry clothes after dry-cleaning process.

The reference weight of dry clothes (weight per item)

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(9\)

Note!

  • Do not put more load than rated.
  • Do not dry dripping wet laundry. The dryer might get damaged

Only dry laundry is suitable for tumble drying. Regarding the laundry care labels:

  • Suitable for tumble drying
  • Normal drying process: Drying in the tumbler is possible under a normal load and temperature 80°C.
  • Mild drying process: Caution is appropriate when tumble drying. Select a mild process with reduced thermal action.
  • Do not tumble dry: Articles unsuitable for drying in the tumbler.

Control Panel

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(14\)

  1. On/Off Product is switched on or off.
  2. Start/Pause Press the button to start or pause the drying cycle.
  3. Option These buttons are used for setting additional functions.
  4. Display The display shows the setting, estimated program time remaining and status messages of your dryer.
  5. Programmes Different drying cycles can be selected according to the users needs and the type of laundry to be dried.

Option

  • Anti-Crease
    • At the end of the drying cycle, the anti-crease time is 60 minutes (default), 30 minutes or 90 minutes (selected). This function prevents the laundry from creases. The laundry can be removed during the anti-crease phase. Except 【Wool】and【Refresh】, all the other programmes have this function.
  • Delay
    • This function is used for delaying the start of the drying programme up to 12 hours. When the delayed programme starts, the time starts to count down on the display.
    1. Load your laundry and make sure the machine door is closed.
    2. Press the 【On/Off】button,then use the programme selector knob to select the desired programme.
    3. Press the【Delay】 button.
    4. Repeatedly press the 【Delay】button to select the desired delay time.
    5. After the 【Start/Pause】 button is pressed, the Dryer is at the running condition. The drying procedure will be automatically performed when the delay time is over.
    6. If you press the【Start/Pause】button again, the delay function will be paused.
    7. If you want to cancel the “Delay” function, please press the 【On/Off】button.
  • Silence Dry
    • Rotate speed of the drum will drop down to reduce the noise of the dryer, but the drying time will extend.
  • Intensity
    • You can adjust the dryness level of the laundry by pressing the【Intensity】button.
    1. The intensity function can be adjusted only before the programme starts.
    2. Press the the【Intensity】button repeatedly to adjust the drying grade.
    3. Except for the【Wool】, 【Time Dry】, 【Refresh】programme, all the other programmes can be adjusted with the【Intensity】function.
  • Time
    • When the【Time Dry】or【Refresh】 programme is selected, the 【Time】button can be used to adjust the drying time in 10 min. steps.
  • Lamp
    • The drum light will be on for 1 minute when the button is pressed or 1 minute when the door is open.
  • Signal
    • Set the buzzer on or off. In default condition, the buzzer is on.
    • When the buzzer is on:
    1. The dryer will affirm the pressed function button by a sound.
    2. If the programme knob is rotated during the dryer is running, the buzzer will remind the user that this is an invalid operation.
    3. When the drying programme is done, the buzzer will beep.
  • Sterilization
    • After selecting the program, you can choose the Sterilization】 function according to your needs. Press 【Sterilization】 to select this function. Press it again to cancel. After selecting the 【Sterilization】 function, germs are removed during the drying process, making the clothes cleaner and safer. Use this function with caution for light, thin or delicate laundry.
  • Child Lock
1. This machine incorporates a special child safety lock, which can prevent children from carelessly pressing buttons or making a faulty operation.
2. When the drying cycle is running, press the the【Delay】and【Lamp】buttons at the same time for 3 seconds to start the child lock function.
3. When the child lock function is set, the display will show the Child lock icon and all buttons are deactivated, except/Off】 and 【Lamp】button.
4. To deactivate the child lock function, the【Delay】and【Lamp】buttons shall be pressed at the same time for 3 seconds.
  • My Cycle
    • Used to define and save your favourite programme, which is used frequently.
    1. Select the desired programme and other drying functions.
    2. Press and hold the【Intensity】for 3 seconds until the beep sounds and the desired program has been saved.
    3. Turn the programme selector to the【My Cycle】 position, then you can start your favourite programme. If you want to change the【My Cycle】 settings, repeat the steps (1) and (2).

Display

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(25\)

Programmes
Before starting the appliance

  1. Insert the plug into the socket.
  2. Put your laundry loosely inside the drum.
  3. Close the door. Take care not to trap any items.
  4. Switch on the machine.

Programme selector

  1. When the LED display screen brightens up, rotate the programme knob to select the desired programme.
  2. Select the【Time】,【Anti – Crease】,【Delay】,【Silence Dry】,【Sterilization】or 【Intensity】functions for additional options.
  3. Press the【Start/Pause】button.
  4. Press the【On/Off】button after the programme has been completed.

Programme start

The drum will rotate after the programme starts. The cycle phase LED in the display will light up and the remaining programme time will be displayed.

Programme end

  1. The drum will stop rotating after the programme ends. The display will show “End” and a related LED will illuminate. The dryer will start functioning if the user doesn’t remove the load. After the load is removed, press【On/Off】to switch off if the display is on. The drying is complete, please unplug.
  2. Deal with the problems according to the “Trouble Shooting” section, if there is an unexpected stop during the drying procedure or the dryer shows an Error Code.

Drying Programmes Table

MPD-91125

Programme Max Load Application/Properties Delay Time
Cotto Extra 9.0kg For single or multi-layer cotton laundry to be dried
completely for direct storage. Y N

Standard
Iron| For single-layer cotton laundry to remain damp for ironing.
Mix| | 3.5kg| For mixed fabrics from cotton and synthetics.| Y| N
Synthetics| Extra| 3.5kg| For thick or multi-layer synthetic fabrics to be dried completely.| Y| N
Standard| To dry thin synthetic textiles, that are not ironed, such as easy- care shirts, baby clothes or socks.
Wool| | 1.0kg| Gentle drying for machine-washable wool items. The final moisture content will depend on the load size and the moisture content after spinning.| Y| N
My Cycle| | | Define and save your favourite programme.| Y|
Bed Linen| | 4.5kg| To dry bed linen, bed sheets or other large items.| Y| N
Baby Care| | 1.0kg| To dry a small amount of baby clothing.
Shirts| | 1.0kg| For easy care laundry, such as shirts and blouses equipped with anti-crease functionality to minimize the ironing effort. Place clothes loosely in the dryer. Once dried, remove it quickly and hang it on a clothes hanger.
Outdoor| | 3.0kg| To dry sportswear and thin fabrics from polyester, which are not ironed.| Y| N
Time| Time Dry| 3.0kg| To dry individual items or complete the drying process of multi-layer fabrics with different drying behaviours, such as jackets, pillows or voluminous items. Min 10 min. to max. 150 min.(in 10 min.steps)| Y| Y
Refresh| 1.0kg| To refresh clothes or to remove odours. Min. 20 min to max. 180 min.(in 10 min. steps)

Note for Test Institutes:

  • Test programme following Regulation 392/2012/EU for energy labelling, measured per EN 61121 and suitable for drying normal cotton load at rated load capacity.
  • This programme is suitable for drying normal wet cotton laundry and it is the most efficient programme in terms of energy consumption for cotton.

MPD-10125

Programme Max Load Application/Properties Delay Time

Cotton

| Extra|

10.0kg

|

For single or multi-layer cotton laundry to be dried completely for direct storage.

|

Y

|

N

Standard
Iron| For single-layer cotton laundry to remain damp for ironing.
Mix| | 4.0kg| For mixed fabrics from cotton and synthetics.| Y| N

Synthetics

| Extra|

4.0kg

| For thick or multi-layer synthetic fabrics to be dried completely .|

Y

|

N

Standard| To dry thin synthetic textiles, that are not ironed, such as easy- care shirts, baby clothes or socks.
Wool| | 1.0kg| Gentle drying for machine-washable wool items. The final moisture content will depend on the load size and the moisture content after spinning.| Y| N
My Cycle| | | Define and save your favourite programme.| Y|
Bed Linen| | 5.0kg| To dry bed linen, bed sheets or other large items.|

Y

|

N

Baby Care| | 1.0kg| To dry a small amount of baby clothing.

Shirts

| |

1.0kg

| For easy care laundry, such as shirts and blouses equipped with anti-crease functionality to minimize the ironing effort. Place clothes loosely in the dryer. Once dried, remove it quickly and hang it on a clothes hanger.
Outdoor| | 3.0kg| To dry sportswear and thin fabrics from polyester, which are not ironed.| Y| N

Time

|

Time Dry

|

3.0kg

| To dry individual items or complete the drying process of multi-layer fabrics with different drying behaviours, such as jackets, pillows or voluminous items. Min 10 min. to max. 150 min.(in 10 min.steps)|

Y

|

Y

Refresh| 1.0kg| To refresh clothes or to remove odours. Min. 20 min to max. 180 min.(in 10 min. steps)

Note for Test Institutes:

  • Test programme by Regulation 392/2012/EU for energy labelling, measured by EN 61121 and suitable for drying normal cotton load at rated load capacity.
  • This programme is suitable for drying normal wet cotton laundry and it is the most efficient programme in terms of energy consumption for cotton.

Consumption Data 1

Model| Program| Capacity| Spin Speed / Residual Humidity| Drying Time| Energy Consumption
---|---|---|---|---|---
MPD-91125| Cotton Standard| 9kg| 1000rpm / 60%| 200min| 1.59kWh
Cotton Standard| 4.5kg| 1000rpm / 60%| 125min| 0.88kWh
Synthetic Standard| 3.5kg| 800rpm / 40%| 75min| 0.55kWh
MPD-10125| Cotton Standard| 10kg| 1000rpm / 60%| 210min| 1.75kWh
Cotton Standard| 5kg| 1000rpm / 60%| 150min| 0.95kWh
Synthetic Standard| 4kg| 800rpm / 40%| 80min| 0.60kWh

Note!

  • Thick or multi-layered fabrics, e.g. jackets etc., are not easy to dry. it is recommended to choose the Cotton Extra programme or use the “Intensity” function.
  • As uneven material, thick and multi-layered clothes are not easy to dry, it is better to choose the appropriate time drying programme to completely dry them if some parts of the clothes are still damp after the programme finishes.
  • All data are measured by EN 61121.
  • The actual consumption may differ from the values given in the table, depending on the amount of the laundry, type of fabric, residual moisture and any additional functions selected.

MAINTENANCE

Cleaning and Care Empty the water container

  1. Pull out and hold the water container with two hands.
  2. Tilt the water container, pour out the condensate water into the basin.
  3. Install the water container.

Warning!

  • Empty the water container after each use. Once the water container is filled, the program will be paused and the “ ” icon will light. After the container is emptied, the dryer can be restarted by pressing 【Start/Pause】button.
  • Do not drink the condensated water.

Clean the filters

  • This dryer has a primary door lint filter.
  • Make sure you clean the door filter after each cycle.

Note!

  • To ensure the double-layer filter can be closed smoothly, the arrows at both ends need to be aligned, and the middle slot and the rib need to be aligned.MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(28\)

Clean the door filter

  1. Open the door.
  2. Take out the door filter.
  3. Open the filter and remove the fluff on the filter screen, You can clean it in running water.
  4. Dry the door filter thoroughly before installing it back.

Note! Take notice of the correct orientation before to insert the door filter.

Clean the heat exchanger Warning!

  • Do not touch the heat exchanger with your hand, which may cause an injury.
  • As necessary, approx. once every 3 months, remove the fluff from the heat exchanger using a vacuum cleaner with a dusting brush attached.
  • Clean the heat exchanger without applying any pressure. Otherwise the heat exchanger could be damaged. The dryer will not dry if the cooling fins are damaged or bent.

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(29\)

Clean Tumble dryer Warning!

  • Disconnect the power cord before cleaning!
  • Clean the dryer with a wet cloth which is only damped by clean water.
  • Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaners. These could damage plastic surfaces and other parts.
  • Please wear gloves when cleaning.

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(30\)

  • Prepare a wet cloth damped with clean water.
  • Clean the door, especially the inside window.
  • Clean the sealing around the door opening.
  • Clean the humidity sensor inside the drum.
  • Take out the filter, and clean the sealing and airflow openings.
  • Before starting the dryer, dry all parts with a soft cloth.

Troubleshooting

  • Many malfunctions and faults that might occur in daily operations can be easily remedied.
  • Time and money will be saved because a service call won’t be needed.
  • The following guide may help you to find the reason for a malfunction and correct it.

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(31\)

Warning!

  • Only authorised technicians can carry out repairs.
  • If the LED displays another prompt and the dryer does not work, pull out the plug from the socket, please call the service.

Note!

  • Before you call the service, please check if you have dealt with the problems yourself by consulting the user instructions.

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(32\)

Warning!

  • If you cannot deal with the problems by yourself and need help:
  • Press the 【On/Off】button.
  • Pull out the mains plug and call the service.

Technical Specifications

Model Parameter MPD-91125 MPD-10125
Dimension(LWH) 595675845(mm) 595675845(mm)
Ambient temperature +5°C ~ +35°C +5°C ~ +35°C
Rated input power 750W 750W
Rated voltage 220-240V~ 220-240V~
Rated frequency 50Hz 50Hz
Refrigerant R290 R290
Weight of product 48kg 48kg
Rated capacity 9.0kg 10.0kg
GWP 3 3
CO 2 – eq 0.00t 0.00t
Quantity of refrigerant 130g 130g

Note!

  • The rated capacity is the maximum capacity to be dried at one time. Make sure that the dry clothes that are loaded into the appliance do not exceed the rated capacity.
  • Do not install the tumble dryer in a room when there is a risk of frost occurring. At temperatures around freezing point, the tumble dryer may not be able to operate properly.
  • There is a risk of damage if the condensate water is allowed to freeze in the pump, hoses and/or condensate water container.

Product Fiches

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(33\)

  1. Energy consumption per year, based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used The programme ‘Cotton Standard’ used at full and partial load is the standard drying programme to which the information in the label and the fiche relates. This programme is suitable for drying normal wet cotton laundry and it is the most efficient programme in terms of energy consumption for cotton.

MORRIS-MPD-10125-Heat-Pump-Dryer-FIG-1 \(34\)

  1. Energy consumption per year, based on 160 drying cycles of the standard cotton programme at full and partial load, and the consumption of the low-power modes. Actual energy consumption per cycle will depend on how the appliance is used The programme ‘Cotton Standard’ used at full and partial load is the standard drying programme to which the information in the label and the fiche relates. This programme is suitable for drying normal wet cotton laundry and it is the most efficient programme in terms of energy consumption for cotton.

CONTACT

  • IMPORTER:
    • Kalliopi Karyda & Co, LP
    • 87A, 17th November str.
    • 55535, Pylea, Thessaloniki
    • Tel. 2316 006600
    • Fax. 2316 006650
    • www.morris.gr.

DANGER This symbol indicates that there are dangers to the life and health of persons due to extremely flammable gas. Please read this manual carefully before use this product.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

MORRIS User Manuals

Related Manuals