LLOYTRON E1201 Corded Lightweight Travel Kettle Instruction Manual

LLOYTRON E1201 Corded Lightweight Travel Kettle

Thank you
Thank you for the purchase of this quality KITCHEN PERFECTED product. Used carefully and in accordance with the instructions enclosed, it should give you trouble free service over a long period of time. Please keep
these instructions for future reference.

FEATURES

• Max. Capacity: 0.9 Litre (5 Mugs approx.)
• Universal Voltage
• Power ‘On’ Button with LED Indicator
• Automatic Safety Cut- Off
• Manual Override / Off Button
• Ultra Light Construction
• Stainless Steel Heating Element
• Boil Dry Protection
• 2x Plastic Mugs
• Free Travel Bag

SPECIFICATIONS

• Operating Voltage: 110-240v-50Hz/60Hz
• Wattage: 230W-1088W

IMPORTANT SAFEGUARDS AND PRECAUTIONS

SAVE THESE INSTRUCTIONS

• Read all instructions carefully
• This appliance is intended to be used in household and similar applications such as:
  • Staff kitchen areas in shops, offices and other working environments;
  • Farm houses;
  • By clients in hotels, motels and other residential type environments;
  • Bed and breakfast type environments.
• Note: this appliance is not intended for commercial use
• Only for use indoors.

DO NOT
Do not use outside or in damp conditions.

• Before plugging into mains socket, check whether supply line voltage and current rating are in compliance with the rated electrical parameters shown on the rating label.
• Keep away from hot surfaces, such as gas or electric hobs and ovens etc

DO NOT
Do not use for any purposes other than the appliances intended use.

• This appliance is not intended to be operated by means of an external timer or separate remote control system.
• To prevent damage to the mains cord, do not let it pass over sharp corners, edges or hot surfaces.
• If the supply cord is damaged, do not use. Check before each use!
• The supply cord cannot be replaced. If the cord is damaged the appliance should be scrapped.

DO NOT
Do not use if any part of this appliance is damaged in any way.

• Always unplug when not in use.
• To prevent against the risk of electric shock, do not submerge any part of this appliance in water, unless advised in this manual.
• This appliance should only be used on a flat surface.

IMPORTANT SAFEGUARDS AND PRECAUTIONS

• This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.
• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.

CAUTION: Hot Surface I &WARNING

• Always unplug the Kettle before refilling.
• Only use the kettle with the stand provided.
• Burns can occur from touching hot surfaces, hot water or steam.

DO NOT

• Do not hold the handle while the kettle is boiling.
• Do not use this appliance to warm feeding­bottles.
• Do not use with any other liquid .

CAUTION
Ensure that the appliance is switched off before removing it from its stand.

WARNING
Do Not remove the lid while the water is boiling.

DO NOT

• Do not operate the kettle without water.
• Do not overfill the kettle, since this may eject hot water.

LOCATION OF CONTROLS

• A – On/Off Buttons
  These buttons will activate the heating element, causing water to boil within the kettle.

• B – Power Indicator
  This lights up when the heating element is switched ‘on’, indicating that the water is heating up.

• C- Handle
  Once the water is boiled, carefully grip the handle and pour into a suitable mug. Do not touch the handle while water is boiling.

• D – Hinged Lid
  Open the lid and pour water into the water tank. Do not pour water directly into the spout.

• E- Spout
  When pouring boiling water into a suitable mug, the spout helps to control the flow of water to avoid spillages.

• F – Power Cord
  Connect the power cord to a suitable 110-240v-50/60Hz Mains Supply. This kettle can be used when travelling abroad.

OPERATION

CAUTION
Before first use, boil the kettle twice and discard the water to remove any dirt left over from production.

1. Position the kettle base on a flat stable surface.
   DO NOT
   Do Not position the kettle/kettle base near hot surfaces or open flames.

2. Lift the lid of the kettle and fill with water up to the ‘MAX’ level marker shown on the inside of the water tank. The water level should be no higher than the ‘MAX’ mark and no lower than the ‘MIN’ mark.

3. Close the lid, ensuring that it clicks into place securely.

4. Insert the power cord into a suitable 115-240v mains socket, taking care that the cord cannot be accidently caught by passers by.

5. Press the ‘On’ button. This will cause the heating element to become operational. The power indicator will light up to indicate this.

6. The kettle and the power indicator will automatically switch ‘off’ after the water has boiled.

7. If you wish to cancel the boiling cycle, press the ‘off’ button.

8. Once the water has boiled, carefully pour the water into a suitable mug via the spout.

WARNING: HOT STEAM
Keep away from the Kettle during boiling cycle as hot steam can cause serious burns.

WARNING: DO NOT OVERFILL
This will cause boiling water to be ejected from the spout.

SAFETY CUT-OFF
This kettle is equipped with a safety cut-off device, to protect the appliance from inappropriate use. Should the appliance be accidentally operated without water, or if all the water has evaporated, the safety cut-off device will automatically switch off the heating element. If this occurs, unplug the kettle and allow it to cool down for ten minutes before re-filling with cold water.

CLEANING AND CARE

MAINTENANCE
This appliance has been designed to operate over a long period of lime with a minimum of maintenance. Continuous satisfactory operation depends upon proper care and regular cleaning.

WARNING
Before performing any maintenance or cleaning of this appliance, disconnect the appliance from the electrical supply.

CLEANING
The exterior surface of the appliance should be cleaned with a clean damp cloth only.

DO NOT
Do Not use abrasive cleaners on any part of this appliance.

TROUBLESHOOTING

HARD WATER AREAS: In Hard Water areas. a build up of calcium deposits may become visible around the element. This sometimes causes a distaste in the water.

To help keep the kettle in pristine condition, it is recommended to clean the inside of the kettle with a solution of 10% White Vinegar and Water. Boil several times, before rinsing twice with fresh water to remove the calcium build up and the vinegar This procedure should be done at first signs of calcium deposits.

BAD TAS TING WATER: Occasionally the local water authority adds too much Chlorine to our domestic water. Chlorine is used to kill any bacteria in the water. However, too much Chlorine can sometimes have a chemical reaction to plastic and rubber. The reaction is not harmful but can often create a bad smell or taste. This is also noticed in Washing Machines and Dish Washers. It is not a fault of the Kettle and can usually be removed by one of the following:

1. Boil the kettle 4 or 5 times with a solution of 10% White Vinegar and Water. Fill to MAX mark.
2. Boil the kettle 2 or 3 times with an added 1 table spoon of Bicarbonate of Soda. Fill to MAX mark. Turn off immediately if it begins to froth.
3. Boil the kettle 3 or 4 times, with a squeeze of fresh Lemon Juice. Fill to MAX mark.

Always throw away the boiled water after each exercise.
Always boil fresh water twice after any of the recommendations above.
In very bad water area’s, it is recommended to filter the water before placing inside the kettle.

FITTING A NEW UK PLUG

Your appliance operates on 220-240V-50Hz AC Mains and comes fitted with a 3-pin BSI Approved plug,so that it is ready for use for the UK or Eire market. If for any reason you need to fit a new plug, the flexible
mains lead must be connected as shown below:

IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:

• BLUE: NEUTRAL (N)
• BROWN: LIVE (L)
• GREEN AND YELLOW: EARTH (E)

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The BLUE wire must be connected to the terminal which is marked with the letter “N” or coloured BLACK.
The BROWN wire must be connected to the terminal which is marked with the letter “L” or coloured RED.
The GREEN AND YELLOW wire must be connected to the terminal which is marked with the letter “E”, the symbol for coloured GREEN.
DO NOT CONNECT EITHER WIRE ‘L’ OR ‘N’ TO THE EARTH TERMINAL OF A 3-PIN PLUG
Always ensure that the Mains Cord is located into the Plug through the Cord Guard or Cable Clamp, and that the Cord Guard screws are tightened to clamp the Cord (outer sheath and inner coloured wires) in position in the Plug. Make sure the Plug top is also fitted securely.

The supply cord cannot be replaced. If the supply cord is damaged, the appliance should be scrapped.

This appliance must be protected by a 5 Amp fuse in a 13 Amp type (BS1363) plug Should you need to replace the fuse, use only an ASTA approved BS1362 fuse

kitchen perfected CUSTOMER SERVICES
If you have any queries about this product then please contact Lloytron Customer Services on line at:

www.lloytronhelpdesk.com

To find out more about Kitchen Perfected products, visit www.lloytron.com

Distributed in UK by Lloytron Ltd, Laltex House, Leigh, England WN? 3XH Distributed in Europe by Laltex Ireland Ltd, Dublin 2, D02 AY86

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>