ZYXEL EX3600 T0 Dual Band Wireless AX6000 Gigabit Ethernet Gateway User Guide
- June 13, 2024
- ZYXEL
Table of Contents
ZYXEL EX3600 T0 Dual Band Wireless AX6000 Gigabit Ethernet Gateway
PRODUCT INFORMATION
MODEL NO.: EX3600-T0 Dual-Band Wireless AX6000 Gigabit Ethernet Gateway
Package Contents
INSTALLATION
Quick Start Guide
- Step 1 Hardware Connections
1. Use an Ethernet cable to connect the WAN port to an external modem.
2. Connect a computer to the LAN port using the yellow Ethernet cable (optional).
3. Connect the power cable to the Zyxel Device and press the power button.
* **Green** **On:** Power is on. Blinking The Zyxel Device is starting up.
* **Red** **On:** There is a malfunction. Blinking The Zyxel Device is upgrading firmware.
* **Green On** – Internet is ready. Blinking The Zyxel Device is transmitting/receiving data.
* **Red On:** The Zyxel Device attempted to get an IP address but failed. Off-WAN connection is down or in Bridge mode.
-
Step 2 WiFi Connection
-
4D g The SSID and Wireless Key are on the device label.
-
On your smartphone or notebook, find this SSID. Enter the Wireless Key to connect.
-
Automatic Connection (Using WPS)
-
Press the WPS button until the WiFi 2.4G and 5G LEDs light up in amber.
-
Press the WPS button on the client. If the WPS method fails, perform the Using SSID method.
-
-
Step 3 Quick Start Wizard
Open a web browser and go to https://192.168.1.1. Enter the default Username (admin) and admin login password (on the device label), and then click Login. A wizard runs. Follow the wizard prompts to complete the setup.
MPro Mesh Network Scenario
-
Use the included Ethernet cable to connect the first Zyxel Device (Zyxel Device-1) LAN port to a gateway modem LAN port. Wait until the POWER and INTERNET LEDs are steady green.
Note : To check if your Zyxel Device supports MPro Mesh, scan the QR code on the last page. -
Log into the second Zyxel Device (Zyxel Device-2) Web Configurator. Go to Maintenance> Operation Mode to select Extender, then click Apply.
Note : The Zyxel Device is in Router mode by default. Make sure to set the Zyxel Device-2 to Extender mode before connecting it to Zyxel Device-1. -
Use another Ethernet cable to connect the second Zyxel Device (Zyxel Device-2) LAN port to the first Zyxel Device (Zyxel Device-1) LAN port. Wait until the POWER and INTERNET LEDs on Zyxel Device-2 are steady green.
-
Unplug the Ethernet and power cable from the Zyxel Device-2.
-
Place the Zyxel Device-2 where you want to extend your wireless network.
-
Plug in the power adapter. Make sure your INTERNET LED is steady green. Move the Zyxel Device-2 closer to the Zyxel Device-1 if the INTERNET LED is red. For more details on the LEDs, please refer to the LED table. To add more extenders to your network, repeat from step 2.
Note : Do not unplug the Ethernet cable connecting the Zyxel Device-1 and the gateway modem.
Wall Mounting
(Optional)
- Drill two holes in the wall at a distance of 110 mm.
- Insert screw anchors and screws (not provided) into the holes.
- Place the Zyxel Device so the wall mount holes line up with the screws. Slide the Zyxel Device down gently to fix it into place.
Managing Your Zyxel Device Using the MPro Mesh App
Download the MPro
Mesh app to manage your Zyxel Device.
Note : To manage your Mesh network, connect the MPro Mesh opp to the Controller.
- Scan this QR code to see a list of Zyxel devices that support MPro Mesh.
- Scan this QR code to see the steps for setting up your Zyxel Device with the MPro Mesh opp.
Support Information
https://service-provider.zyxel.com/globa1/en/tech-support
See the User”s Guide at www.zyxel.com for more information, including customer support and safety warnings.
EU Importer
Zyxel Communications A/S Gladsaxevej 378, 2. th. 2860 S0borg, Denmark.
https://www.zyxel.com/dk/da/
UK Importer
Zyxel Communications UK Ltd. 2 Old Row Court, Rose Street, Wokingham, RG40
1XZ, United Kingdom (UK) https://www.zyxel.com/uk/en/
Copyright© 2023 Zyxel and/or its affiliates. All Rights Reserved.