NETGEAR EVA700 Digital Entertainer Installation Guide

NETGEAR EVA700 Digital Entertainer

Introduction

NETGEAR Digital Entertainer EVA700
Your NETGEAR Digital Entertainer EVA700 has been designed to work with Intel® Viiv™ technology-based PCs or Windows XP PCs without Intel Viiv technology. If you have an Intel Viiv technology-based PC go to the other side of this document. If you do not have an Intel Viiv technology-based PC use the instructions below.

Windows XP Computer Without Intel® Viiv™ Technology
Install your NETGEAR Digital Entertainer EVA700 in this order:

1. Install the digital entertainer.
2. Use the NETGEAR CD to install the software.
3. Set up the digital entertainer to work with Windows Media Connect.

Installing the Digital Entertainer

This guide explains a wired Ethernet installation, which is optimal for video streaming. You can also use the NETGEAR Powerline HD Ethernet Adapter Kit (HDXB101 sold separately) for high-performance connectivity through your electrical outlets. For other network options such as wireless 802.11g or 802.11b networks, see the Digital Entertainer Model EVA700 User Manual. The digital entertainer is compatible with the following types of video and audio cables:

• Video cable and Audio cable (included in the package).
• SCART (not included in the package).
• S-Video, or Component Video. See the Digital Entertainer Model EVA700 User Manual for instructions.
  The rear view of the digital entertainer is shown below:

1. Connect the digital entertainer to your television set and audio equipment. If you use a digital a/v receiver, use S/PDIF coaxial cable to connect it.
2. Connect the digital entertainer to the router with an Ethernet cable.
3. Connect the digital entertainer power cord and plug it into an outlet. The LED on the front of the digital entertainer lights up to show that it is powered on.
4. Install the two AA batteries into the remote control that shipped with the product.
5. Turn on the television.
6. The television displays “Do you want to use the Intel® Viiv™ technology network setup?” If you do not see this message, aim the remote control at the digital entertainer, and push TV mode. You can cycle through the TV modes to get the best display.
7. Select No. The television displays network information. If there is a problem see the Troubleshooting Tips on this card, or the Digital Entertainer Model EVA700 User Manual.

Installing the Software

After you have connected the digital entertainer, follow these steps to install the software.

1. Power on your computer and log in as needed.

2. Insert the NETGEAR CD into the CD drive on the computer. The main CD page opens.

3. Select Install Software and then click Next.

4. Follow the wizard steps to install the software.

5. When prompted, click Next to install Windows Media Connect.

6. Follow the wizard steps. Click Finish when you are done. The built-in Windows firewall opens ports to communicate with the digital entertainer. For other firewalls, you might need to open these ports:

   • TCP: 2869, 10243
   • UDP: 1900, 10280, 10281, 10282, 10283, 10284

7. Make sure that Folder Sharing in Windows Media Connect is selected.
   Note: Windows Media Connect is set to share the My Music and My Pictures folders (and My Video, if present). You can click Sharing in Windows Media Connect to add or remove shared folders. For more information, see the Windows Media Connect help, or the Digital Entertainer Model EVA700 User Manual.

Setting up the Digital Entertainer

Follow these steps to set up the digital entertainer to work with Windows Media Connect.

1. Turn on the digital entertainer and the television.

2. Aim the remote control at the digital entertainer.

3. Use the remote control to select the onscreen option to allow the digital entertainer to use Windows Media Connect.
   Note: If you cannot see the menu on the television, the remote control may be set with the wrong TV mode for your television. To fix this problem, push TV Mode on the remote control. You can cycle through each TV mode to find and select the correct one

4. Select Save to store the settings.

5. Use the remote control to select the desired media.
   For troubleshooting tips, see the Digital Entertainer Model EVA700 User Manual.

Intel® Viiv™ Technology

To use these instructions, you must have an Intel® Viiv™ technology-based PC featuring the Intel® Viiv™ logo below. Otherwise, use the instructions on the other side of this card or in the Digital Entertainer Model EVA700 User Manual.

Your device has been designed to work with Intel Viiv technology-based PCs, to help you add this device to your network and enjoy content from your PC. To enjoy these features, you may need to update the Intel Viiv software on your PC.

1. Updating the Intel® Viiv™ Software
   Insert the CD that came with your digital entertainer into your Intel® Viiv™ technology-based PC, and follow the on-screen instructions to guide you through the update process.
   Note: You may need to restart your PC to begin using the Intel Viiv software.

2. Set up your device on the network with Intel® Viiv™ Settings

   • a. Select Add a device from the Intel® Viiv™ settings screen.
   • b. Follow the on-screen instructions until you see the get ready screen. If you are setting up your device by connecting it to your router with an Ethernet network cable, go to the Wired Ethernet Cable Setup section. If you are setting up your device with a wireless connection, go to the Wireless setup section.

Wired Ethernet Cable Setup

1. Select connecting it to the router with an Ethernet network cable, and then next.
2. Go to your digital entertainer, and make the audio and/or video connections according to the Installing the Digital Entertainer instructions on the other side of this document.
3. Power on the digital entertainer and go back to your PC.
4. Follow the on-screen instructions to continue adding your device to the network and setting up your Intel® Viiv™ Media Library.
   Congratulations! Your device is set up!

Wireless Setup

1. Select wirelessly, and then next.
   Note: If the Intel® Viiv™ software does not find an Intel® Viiv™ technology verified router skip to the Completing your wireless setup if you do not have an Intel® Viiv™ technology verified router section.

2. Go to your digital entertainer, and make the audio and/or video connections according to the Installing the Digital Entertainer instructions on the other side of this document.

3. Power on the digital entertainer and choose the Intel® Viiv™ technology-based PC setup option. Write down the four-character passcode.

4. Go back to your PC and enter the passcode. Follow the on-screen instructions to continue adding your device to the network and setting up your Intel® Viiv™ Media Library.
   Congratulations! Your device is set up!

Completing your wireless setup if you do not have an Intel® Viiv™ technology verified router

Intel® Viiv™ technology verified routers have this logo on them:

1. Refer to the Digital Entertainer Model EVA700 User Manual to add your digital entertainer to the network if you do NOT have an Intel® Viiv™ technology router. After you add your digital entertainer to the network, continue with step 2 below.
2. From the Intel® Viiv™ settings screen, select View Network Map.
3. Choose your device from the icons in the network map (the icon should have a “?” on it).
4. Follow the on-screen instructions to complete the process of adding your device to the network.
5. Go back to the Intel® Viiv™ settings screen, and select Update Media Library.
6. Follow the on-screen instructions to complete the process of building your media library.
   Congratulations! Your device is set up!
   Note: You may navigate to the Intel® Viiv™ settings window either by selecting the Intel® Viiv™ logo on your desktop or system tray. The logo can also be found in the More Programs area in Windows* XP Media Center Edition

Technical Support

Thank you for selecting NETGEAR products. After completing the installation, register your product at http://www.NETGEAR.com/register. For product updates and Web support
go to http://kbserver.netgear.com/products.

Trademark
© 2006 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.

FAQs

What is the NETGEAR EVA700 Digital Entertainer?

The NETGEAR EVA700 Digital Entertainer is a digital media player designed to stream and play multimedia content from your computer or network storage to your TV, providing a versatile home entertainment solution.

What types of media can the EVA700 play?

The EVA700 Digital Entertainer is capable of playing a wide range of media formats, including music, videos, photos, and online content. It can also display your digital photos as a slideshow on your TV.

How does the EVA700 connect to my TV and home network?

The EVA700 typically connects to your TV through standard audio and video cables or HDMI, and it connects to your home network via Ethernet or Wi-Fi, allowing it to access content from your computer or network storage.

Is the EVA700 compatible with specific streaming services?

The EVA700 Digital Entertainer may support certain streaming services or online content providers. Compatibility with specific services can vary, so check the product specifications or firmware updates for details.

Can I use the EVA700 to access my media library from a computer?

Yes, the EVA700 allows you to access and stream media content from your computer or network storage, making it easy to enjoy your digital media on your TV.

Is the EVA700 compatible with DLNA devices and media servers?

The EVA700 Digital Entertainer is often compatible with DLNA (Digital Living Network Alliance) devices and media servers, allowing you to stream content from these sources to your TV.

What resolution does the EVA700 support for video playback?

The EVA700 typically supports video playback at a maximum resolution of 1080p (Full HD), providing high-quality video output for your TV.

Does the EVA700 come with a remote control?

Yes, the EVA700 Digital Entertainer often includes a remote control, providing convenient navigation and control of your media playback on the TV.

Can I connect external storage devices to the EVA700?

Some models of the EVA700 may include USB ports, allowing you to connect external storage devices like USB flash drives or external hard drives to expand your media library.

Is the EVA700 compatible with specific audio and video codecs?

The EVA700 Digital Entertainer typically supports a wide range of audio and video codecs, making it compatible with various multimedia formats. Check the product specifications for codec details.

What is the warranty period for the NETGEAR EVA700 Digital Entertainer?

The NETGEAR EVA700 Digital Entertainer typically comes with a warranty of 1 year from the date of purchase.

Where can I purchase the NETGEAR EVA700 Digital Entertainer?

You can typically purchase the NETGEAR EVA700 Digital Entertainer from authorized electronics retailers, home theater stores, or reputable online marketplaces to ensure you receive a genuine product.

Can I access online content and streaming services using the EVA700?

The EVA700 may support access to online content and streaming services, but this capability can vary depending on the model and firmware. Check for firmware updates and product specifications for details on supported services.

References:NETGEAR EVA700 Digital Entertainer – Device.report

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>