naxa NE-976 True Wireless Bluetooth Headset & Charging Case User Manual
- June 6, 2024
- NAXA
Table of Contents
naxa NE-976 True Wireless Bluetooth Headset & Charging Case User Manual
Introduction
Congratulations, and thank you for choosing Naxa’s True Wireless Bluetooth®
Headset & Charging Case. This manual will help you operate your new device,
but first you should familiarize yourself with the Bluetooth functionality of
your mobile phone or other external devices before using the Naxa
True Wireless Bluetooth® Headset & Charging Case.
Safety Rules
-
Please follow the rules depicted in this manual closely to ensure your safety.
Before using the product, we would strongly encourage you to read through this user manual. -
Be wary of any edges, uneven surfaces, metal parts, accessories and its packaging to prevent any possible injury or damage.
Do not modify, repair or dismantle the product. Doing so may result in fire, electric shock, complete breakdown of the product, etc. All of which are not covered under warranty. -
Do not use any diluent or volatile liquid to clean the product.
-
Do not use the product in a hazardous location.
Package Contents
Product Diagram
How To Use
General Functions
| Desired Result | Required Action |
|---|---|
| Turn on & Enter the pairing mode | Press the earbud touch buttons at the same |
time. Hold for 3 econds.Another way: Put the wireless earbuds in the charging
case, then take it out, the earbuds will power on automatically.
Pairing| Use a Bluetooth® enabled mobile phone or other Bluetooth® enabled
device to perform necessary pairing actions.
Switch engine| When take the earbuds out of case and wear, you will hear ”
power on–pairing–right channel”, then power on your bluetooth device, search
the pairing name then “connected” , the light flash faster is the main side ,
it will inform you “connected”, the light flash slower is auxiliary side.If
both side light flash fast/slow, then just need to single press one side to
switch the main/auxiliary engine.
Turn off| Press and hold button for 4 seconds. Another way: Put the wireless
earbuds in the charging case, the earbuds will power off and charge
automatically.
Charging| Place the earbuds in the charging case. earbuds will be
automatically charged
Answering a Call
| When two earbuds are paired, Press the button on the left or right earbud to
answer phone calls, press the button again to end calls. Press the MF button
three times to redial and press the MF button four times to wake up Siri or
Google Voice Assistant.
Play / Pause Music| Press the button on either the left or right earbud for 1
second to play music.
Press again to pause music playback.
Pairing to a mobile phone
To use your Bluetooth ® headset, you must first pair the TWS with a mobile
phone.
Once your Bluetooth® headset is paired with a mobile phone, they will remain
paired and automatically recognize each other whenever they are within range.
Pairing to a Bluetooth® Enabled Mobile Phone
- Turn on your phone and ensure the Bluetooth function is activated.
- Tunr on the earbuds and initiate a device search on your phone via the Bluetooth settings menu.
- Search the Bluetooth® devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
- After a few seconds the phone will list the “NAXA NE-976” as a discovered device. Select it and follow your phone’s instructions to establish a connecton.
- The white LED light flashing every 4 seconds means that the pairing was successful.
NOTE:
- When TWS is on: LED light is White.
- When TWS is off: LED light is Red.
- In pairing mode: Left earbud flashes White and Red quickly & right earbud flashes White every 4 seconds.
Charging your headset
Place the earbuds in the charging case. earbuds will be automatically charged
- While charging, the LED indicators on the earbuds will be Red.
- When the earbuds are completely charged, the LED indicators will off.
- When the batteries are low, you will hear a notice sound.
NOTE: The headset will automatically turn off if there has been no Bluetooth connection with your mobile phone for 10 minutes.
Charging the charging case
Use the included micro USB charging cable to connect the charging case to your
computer’s USB port or another USB-compatible power source.
The charging case will begin to charge.
- While charging, the LED indicator will flash.
- When the charging case is completely charge, all LED indicators will be on.
Product Specifications
Battery (Earbud)
| 50mAh each
---|---
Battery (Charge Case)|
300mAh
Power Dissipation
| 16mAh/h
Version|
5.0
Wireless Source
| Bluetooth®
Play Time|
2.5 hours
Charging Time
| 1 hours for earbuds
Charging Time|
1.5 hours for case
FAQ
-
Why is there no power even when the Headset is turned on?
Ans: Ensure the battery has been charged up to 2 hours for initial use. -
There is no sound during playback
Ans: Check the connection between the headset and the phone or computer.
If the connection is not established, please connect again. Make sure the headset is paired with an external Bluetooth® enabled device.
FCC NOTICE
This device complles with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference,and
- this device must accept any interference received, including interference that may cause undesired operation.
Note:This equipment has been tested and found to comply with the tim-its for a class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful in-terference in a residential installation. this equipment generates,uses and can radiate radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to ra-dio communications.However, there is on guarantee that interference, will not occur in a particular installation.if this equipment does cause harmful interference to radio or television reception reception,which can be-termined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION ON MODIFICATIONS
Any changes or modifications not expressly approved by the grantee of this
device may void the authority granted by the FCC to operate the equipment.
Support
If you have problems with your device, please consult the instructions in this
manual. Please also visit us on the web at www.naxa.com
to get up the minute news, alerts, and documentation for your device. For
additional assistance, please contact Naxa Technical Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
http://www.naxa.com/supportcenter/
Keep All Relevant Information for Future Reference.