ZEBRONICS Pixaplay 28 Smart LED Projector User Manual

Smart LED Projector

Pixaplay 28 Smart LED Projector

User Manual
www.zebronics.com

Dear Customer,
Thank you for purchasing the ZEB-Pixaplay 28 LED Projector. Please read the user manual carefully before usage & save it for future reference.
Note :

• To provide a stable power supply, kindly use the cable provided with the product and connect to a AC 100-240V, 50/60Hz power source.
• Avoid the self-disassembly of the product as it results invoiding the product’s warranty.
• Avoid looking directly at the projector lens while itis active.
• Make sure that the projector’s air vents are not blocked while in use. The device must be kept in a well ventilated surrounding for proper functioning.
• It is recommended to power OFF the projector after a continuous usage of 6 hours maximum.
• Place the projector away from water or other liquids. Avoid water accumulation and ensure good ventilation.
• In case of enquiry regarding the projector, email us at [email protected] or contact us at 044 40000004.

Features:

• Multi Connectivity (BTv5.0 HDMI(ARC) x 1 HDMIINX 1 USBx2 AUXOUT)
• Home Theater Projectors for Movies, TV & Gamingetc..
• Powerful Speaker
• Wide Compatibility
• CeilingMountable
• Remote Control (BT +IR)
• Electronics Focus (viaremote) Auto Focus Technology
• Quad Core Processor
• Auto Keystone Adaptation
• Miracast
• Dual band Connectivity (2.4GHz & 5GHz)
• FHD1080p (Native)
• 30,000h lifelong LED lamp
• SmartProjector Netflix Amazon Prime Video YouTube

Specification:

Package Contents:

Product Description

Remote Control

NOTE:

1. To avoid power shortage, do not mix and use the old and new batteries.
2. To avoid battery leakage corrosion, if the remote controller is not used for along time, please take the battery out.

Projector Interface

Setting Up the Projector

1. Connect the power cord to the socket of the projector and turnit ON.
2. Before turning ON, make sure to placeitina flat surface for a proper projection then press the power button / turn it on by using the remote.
3. Align the projector as shown in the image below to ensure proper projection.

| |
---|---|---
Incorrect installation The images left-right small| Correct installation The images is rectangular| Incorrect installation The images right-left small

Focus and Keystone Adjustment:
Note: There is no manual focus, it has only electronics focus. Do ot rotate the lens or it Weil get damageOnce the projector turns ON, wait till it gets loaded. Only after boot-up you’ll be able to adjust the focus using the focus control buttons of the remote as mentioned in the image.

Electronics Focus

Press the “ ” and “ ” buttons on remote control to adjust the clarity

Bluetooth remote pairing
Select IR Remote Control at the top of the home page and the pairing interface will appear

Settings

Open the homepage and select settings.
This settings houses the following submenus:
Network & Internet, Bluetooth, Input / HDMI, Picture, Display & Sound, and system.

USB Connections

Connect the USB drive with the content to the projector. You can access the USB drive by either clicking on the USB icon that pops up on the homepage or by using the file menu next to the settings icon. The above mentioned screen will pop up. You can easily access the media either category wise- videos/Photos or from the folder itselfand play them.

HDMl Interface

Once the HDMI interface is connected to the projector, you will need to select the specific signal source as the input. After connecting the content played on the source will be streamed onthe projector.

Projector distance & size

Note:
Due to optical device error of about 3%, the above data s for reference only, Please use actual measurement when installing the device

1S0 9001:2015 Certified Company
www.zebronics.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>