ATRIX 2AO23GSME04 Wireless Gaming Mouse User Guide
- June 13, 2024
- ATRIX
Table of Contents
WIRELESS MOUSE INSTRUCTIONS
Material: 105gsm double side art paper( C2S).
Color: Black + pantone cool gray 8c
Surface coating : glossy varnish.
wireless Mouse user guide
2AO23GSME04 Wireless Gaming Mouse
Need Help?
Have any questions or comments? Need help getting set up?
Contact us at https://care.gamestop.com
What’s Included
- USB-C Wired and 2.4G Wireless Dual Mode Gaming Mouse
- USB-C to USB-A charging cable
- USB-C to USB-A adapter (Giveaway)
- 2.4Ghz Dongle (Bottom of mouse)
Adjusting DPI
- Press the DPI button to adjust the DPI. When the DPI is switched the LED will change color.
800 DPI (Red) > 1600 DPI (Blue)
3200 DPI (Green) > 4800 DPI (Yellow)
6400 DPI (Cyan) > 16000 DPI (Purple)
LED Indicators
- Flashing Yellow Light – Charging
- Flashing Red Light – Low Battery
Charging the Mouse
- Plug the USB-C end of the charging cable into the mouse.
- Plug the USB-A end of the charging cable into your computer.
- A full charge requires approximately 2.5 hours.
- The light will flash yellow when it is charging and then return to the color indicated by DPI after charging is complete.
Note: The mouse still works when it is charging.
Wired and Wireless Function
- Wired and wireless mode switch automatically. When you insert the 2.4Ghz dongle into your computer without cable connection, it will work as wireless mode.
- When you connect the cable from the computer to the mouse, it will switch to wired mode automatically and work as wired mode.
FCC ID for Dongle: 2A023-ME4 Model: ME4 Made in China
FCC ID for Mouse: 2A023-GSME04 Model: GSME04 Input: DC5V ****500mA
Important Safety Instructions
WARNING When using this product, basic precautions should always be followed, including the following:
Read these instructions carefully.
All cautions and warnings should be followed.
Protect equipment from humidity.
Do not use chemical detergents to clean your device, use a soft dry cloth.
To avoid damage from electrical peaks unplug the device when it is not in use.
If one of the following situations arise, equipment has to be checked by
qualified service personnel:
- Liquid has penetrated into the equipment.
- Equipment has been exposed to humidity
- Equipment has been dropped and/or is damaged.
- Equipment has obvious sign of breakage.
- Equipment does not work well or you cannot get it working according to user’s manual.
SAVE THESE INSTRUCTIONS
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
Geeknet, Inc. 625 Westport Pkwy, Grapevine, TX 76051
Phone: 855-474-7717