STRUCTUBE VALENCE Queen Size Bed Instruction Manual
- June 13, 2024
- STRUCTUBE
Table of Contents
STRUCTUBE VALENCE Queen Size Bed
Hardware
Components
PLEASE NOTE
- FOR USER SAFETY PERIODICALLY VERIFY AND TIGHTEN ALL FITTINGS
- THIS ITEM IS DESIGNED FOR RESIDENTIAL USE ONLY.
- USE POWER TOOL ONLY WHEN INDICATED
- FOR AFTER-SALES PARTS SERVICE PLEASE REFERENCE
- ASSEMBLY INSTRUCTION MAY BE REVISED AT ANY TIME THE MOST RECENT VERSION CAN BE FOUND BY VISITING
CLEAN AND CARE
To keep your fabric upholstered furniture looking new, keep it away from direct sunlight as it may discolor over time. Use a vacuum cleaner with gentle fabric attachment to remove dust and debris as needed. Spills must be cleaned immediately. Avoid rubbing or dabbing as it will penetrate deeper into the fabric fibers and possibly into the stuffing below. Attempt to soak up as much as possible with paper towel or other very absorbent clean/dry cloth. For spills that result in stains, first attempt to clean with mild diluted dish soap in water, and if that doesn’t work consult a furniture cleaning specialist. Structure does not test nor recommended any particular cleaning product. After cleaning make sure to dry the area with a fan or blow dryer without heat. Fluff cushions regularly to maintain shape. Rotate removable cushions frequently and from time-to-time verify that installed legs are still tightly secured. When vacuuming underneath, do not drag as it may dislodge the legs and/or damage the frame. Enjoy your item for many years, do not sit on parts that are not intended to be sat on such as backs and arms as these elements were not made for that purpose. All of our upholstered seating has been built and tested for residential use only. Take good care of your new item and it will take care of you!
ASSEMBLY INSTRUCTIONS
WARNING
To ensure that the bed remains stable at all times, adjust the centre support
legs so that the centre rail is level with the floor. If placed on a wooden
floor, be sure to properly adjust the support legs and rest them on non-slip
pads to avoid injury. If moving the bed, carefully lift it to reduce the risk
of the centre legs twisting or buckling.
