EDIFIER W240TN True Wireless Bluetooth Earbuds User Manual

User Manual

W240TN
True Wireless Noise Cancellation In-Ear Headphones
— Manual —

W240TN True Wireless Bluetooth Earbuds

Power ON/OF

1. Power ON when the case is opened.
2. Power OFF when placed in the case and the case is closed.

Note: If there is no Bluetooth connection for 10 minutes after power on, the earbuds will turn off automatically; if there is no Bluetooth connection in noise cancellation or ambient sound mode, the earbuds will turn off automatically after 2 hours.

Pairing

1. Earbuds are placed in the case and keep the case open.
2. Press and hold the button on the case for about 3s. LEDs will be lit one by one from left to right in a circulating pattern.
3. Select “EDIFIER W240TN” in your device setting to connect. LEDs will blink twice and then turn off when successful.

1st Pairing

1. Earbuds are placed in the case and keep the case open. LEDs will be lit one by one from left to right in a circulating pattern.
2. Select “EDIFIER W240TN” in your device setting to connect. LEDs will blink twice and then turn off when successful.

Note: For subsequent use, the earbuds will automatically connect to the device used last time.

Reset

1. Earbuds are placed in the case and keep the case open.
2. Press the button on the case 3 times to re-enter the left & right connection and clear pairing records. LEDs will be lit one by one from side to center in a circulating pattern and then will blink twice when successful.
3. Select “EDIFIER W240TN” in your device setting to connect. LEDs will be lit one by one from left to right in a circulating pattern, then will blink twice and turn off when successful.

Charging /\

Charging case

1. Please connect the case to the power source with the included Type-C charging cable for charging.
2. LEDs are steadily lit when charging and off when fully charged.
   Note: Please do not charge the earbuds when there is sweat or other liquids inside the charging port, which may damage the earbuds.
   Input 5V==200mA(Earbuds)
   5V==1A(Charging case )

Controls

Note:

1. Default sound control: both earbuds-noise cancellation & ambient sound & noise cancellation off; single earbud-noise cancellation off & ambient sound.
2. Images are for illustrative purposes only and may differ from the actual product.
3. Download Edifier Connect App for more customizable control settings.
   For more information, please visit our website: www.edifier.com

Model: EDF200091
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
©2022 Edifier International Limited. All rights reserved.
Printed in China
NOTICE: For the need for technical improvement and system upgrade, the information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. The pictures and illustrations shown in this manual may be slightly different from the actual product. If any difference is found, the actual product prevails.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>