AGILTRON EDFA-1C0 C-Band High-Power SM Booster EYDFA User Manual
- June 13, 2024
- AGILTRON
Table of Contents
AGILTRON EDFA-1C0 C-Band High-Power SM Booster EYDFA
C-Band High-power SM Booster EYDFA
A Photonwares Company
15 Presidential Way Woburn, MA 01801
Tel: 781-935-1200
Fax: 781-935-2040
Website: www.agiltron.com
User Manual
P/N: EDFA-1C0(5,6,7)111xxx (Nov, 2022)
Introduction
This EYDFA is an optical gain module offering compact design, cost-reduced
amplification of optical signal for a variety of applications. An electronic
control circuit is integrated inside the module. The default operating mode is
automatic Power Control.
Features
- Compact design
- Cost-reduced amplification
- Integrated electronic control circuit
- Automatic Power Control
- High reliability
- High output optical power with low noise figure
- Low power consumption.
Typical Applications **
**
This product can be used in various applications including:
- Telecommunications
- Optical fiber networks
- Data transmission systems
- Optical sensing
- Metro and Access networks
- Single-channel optical communication network
- CATV system
- Optical fiber sensing
Specifications
| Parameter | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|
| Operating Wavelength | -5 | 1545 | 1565 | nm |
| Input Power | 23 | – | 10 | dBm |
| Total Output Power | – | – | 40 | dBm |
| Noise Figure (Pin=0dBm, 1550nm) | – | – | 6 | dBm |
| Input/Output Return Loss | – | – | 40 | dBm |
| PDG | – | 0.5 | – | % |
| PMD | – | 0.5 | – | % |
| Supply Voltage | – | – | 12 | DC |
| Power Consumption | – | – | 40 | W |
| Operating Temperature | -5 | – | 50 | °C |
| Storage Temperature | -25 | – | 75 | °C |
| Relative Humidity (non-condensation) | 5 | – | 95 | % |
Electronic Connector Pin Assignment
Power supply (The pin interval is 5mm)
| Pin | Description |
|---|---|
| 1 | GND |
| 2 | +12V |
Communication (The pin interval is 2.54mm)
| Pin | Description |
|---|---|
| 1 | +3.3V |
| 2 | GND |
| 3 | RX |
| 4 | SCLK |
| 5 | MOSI |
| 6 | MISO |
| 7 | TX |
| 8 | SS |
Pin 4-6 and 8 are for SPI interface, no connection is needed when using RX and TX for RS232/USB communication.
Dimensions
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>