FOREVER Classic plus Universal for Light and White Textiles Instructions
- June 10, 2024
- FOREVER
Table of Contents
FOREVER Classic plus Universal for Light and White Textiles
Product Information
FOREVER Classic+Universal for LIGHT & WHITE TEXTILES
The FOREVER Classic+Universal transfer paper is designed for use with light and white textiles. It allows for high-quality, durable transfers that do not fade or crack easily. The transfer paper has been optimized for use with manual heat presses, with specific instructions for pressure, temperature, and time. Before starting mass production, it is recommended to make transfer and washing tests with all materials to ensure the best results.
When printing double-sided designs on textiles, it is important to note that T-shirts for a double-sided print (frontside & backside) should be placed over the lower heat plate. This ensures that only one side is treated with heat, and prevents the design from the other side from being pressed out again.
Product Usage Instructions
- Begin by preparing your design on a computer using design software.
- Print the design onto the FOREVER Classic+Universal transfer paper.
- Preheat your manual heat press to the maximum temperature recommended in the transfer settings.
- Place the textile onto the lower heat plate of the press.
- Place the transfer paper face down onto the textile, ensuring that it is centered and straight.
- Close the press and apply pressure according to the recommended pressure setting in the transfer settings. Hold for the recommended time.
- Open the press and remove the transfer paper carefully and slowly.
- Allow the textile to cool completely before handling or washing.
Note: It is important to follow the transfer settings recommended for
this product to achieve the best results.
These settings include pressure, temperature, and time.
Transfer Instruction for FOREVER Classic+Universal for LIGHT & WHITE TEXTILES
INSTALLATION INSSTRUCTION
PRINTER SETTINGS
- Media Mode: Heavy Paper or similar
- Feeding: Multi-Purpose-Tray
- Image Mode: Mirrored
TRANSFER SETTINGS
AUTOMATIC HEAT PRESS MANUAL HEAT PRESS
PRESSURE| 5 bar/70 PSI| maximum
TEMPERATURE| 200°C/390°F| 200°C/390°F
TIME| 10-15 sec.| 10-15 sec.
FIX| 10 sec.| 10 sec.
TRANSFER APPLICATION
- Place the textile on the lower plate.
- Place the transfer paper onto the T-Shirt.
- Press for 10-15 seconds.
- Remove the transfer paper immediately.
- (Never take the T-Shirt off the press before the transfer paper has been peeled off.)
- For better washability put a sheet of Matt Finish Economy or Glossy Finish with the glossy side down onto your design and press again for 10 seconds.
- For a softer touch stretch the garment into the width as long it is hot.
- WASHING:
- Up to 60°C
- IRONING:
- When ironing cover the print with baking paper
- Before starting mass production, we recommend making a transfer and washing test with all materials.
- Important advice for double-sided printing on textiles:
- T-Shirts for a double-sided print (frontside & backside), have to be put over the lower heat plate. In this case, only one side will be treated with heat and you avoid that the applicated design from the other side will be pressed out again.
- If your T-Shirt is yellowing, lay a piece of fleece onto it during the transfer process
- www.amayauk.com
- 02392 590 281
- sales@amayauk.com
- Southern Office: 400-450 Nest Business Park, Martin Road, Havant, Hampshire, PO9 5TL
- Midlands Office: Unit 4A-C East Bridgford Business Park, Kneeton Road, East Bridgford, Nottingham, NG13 8PJ
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>