BRESI M300t Wireless Mouse User Manual

BRESI M300t Wireless Mouse

Packing List

Basic Specification

Mouse size:100.lx62.45×35.62mm
Mouse net weight:58.0g±S.0g

System support:

• 2.4G or BT3.0 mode:
• Windows XP
• Windows7
• Windows8.1
• Windowsl0
• Mac OS Xl0.4 or above BTS.0 mode:
• Win8.l
• WinlO
• Mac OS Xl0.4 or above

Diagram

1. Left Button
2. Right Button
3. Scroll Wheel
4. DPI Button
5. .Mode Switch Button
6. USB Receiver  (Stored in the battery compartment)
7. Switch

Mouse Features

1. .Multiple Modes to Switch: There are 2 modes as BT and 2.4G. which can separately connect to 2 devices. You can switch the mode via the bottom mode switch button.

2. Bluetooth have two selections for supporting different systems. It provides different devices with different choices of Bluetooth versions Please select “BT3.0 Mouse· for systems that are backward compatible with Windows 7.
   Please select “BTS.0 Mouse· for systems that are upward compatible with Windows 8.

3. The mouse is equipped with 3 DPI (800 /1200/1600) and the default setting is 1600. You can switch them cyclically by pressing DPI button.

4. Power Saving Mode: The mouse will enter into sleep mode if it’s unused for 30 min. and it can be woken up by pressing any button on it

5. Forward and backward buttons are not available on Mac OS devices.

Instructions

First Use

1. Put an AA dry cell into mouse with the correct polarity direction. and tum on the switch on it’s bottom.
2. Long press the mode switch button for 3s. and the mouse will enter into Bluetooth pairing state after the indicator light turns to flash quickly.
3. urn on the Bluetooth on your laptop. Select “BT3.0 Mouse” if your computer system is Windows 7 or backward compatible with it Select “BTS.0 Mouse· if your computer system is Windows 8 or upward compatible with it The mouse is workable after the successful connection.

Mode Switch
2.4G Mode: Short press the bottom mode switch button to switch the mouse to 2.4G mode. and the indicator light will flash slowly. Plug the USB receiver in computer port and the mouse is workable after it’s paired with the computer automatically.

Solutions for 2.4C Connecting Problems
Repeat the pairing steps after confirming that the mouse is under in 24G mode. Press left button. right button and scroll wheel simultaneously for 3·5 seconds. and release them after the indicator light flashes quickly. Then plug USB receiver in computer port for pairing.

Solutions for BT connecting Problems
Reboot the mouse and empty the Bluetooth list on your computer. Repeat the connecting steps according to the instructions of BT connection.
Note
If the product is still not workable after above solutions. you could repeat those steps for a few times. If your problem can’t get solved yet please contact our Customer Service for help.

FCC Declaration of Compliance Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference. and
2. this device must accept any interference received. including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses. and can radiate radio frequency energy. and if not installed and used in accordance with the instructions may causeharmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio /fV technician for help.

FAQ Card

Q: Mouse’s BT mode doesn’t work.

1. Turn off the switch and tum it on again.
2. Press mode switch button on the bottom of mouse lightly and switch to BT mode.
3. Turn on the Bluetooth of your computer and clear the Bluetooth connection list
4. Keep the mouse close to the computer. Long press mode switch button over 3s and release it after BT mode indicator light flashes quickly.
5. Connect with “BT3.0 Mouse” if your computers ystem is below Wins 7. Connect with “BTS.O Mouse • if your computers system is above Wins 8.

Mouse’s 2.4G mode doesn’t work.

1. Turn off the switch and turn it on again
2. Press mode switch button on the bottom of mouse lightly and switch to 2.4C mode_
3. Press left button, right button and scroll wheel simultaneously over 3s and release them. then the mouse will enter into 2.4G auto-pairing mode with the indicator light flashing quickly.
4. Unplug USB receiver and re-plug it into the computer. Keep the mouse close to the USB receiver. Code matching succeeds when the indicator light is off. And then mouse can work correctly.

Mouse delays and does not work correctly

ANS

1. Low battery levels. Please replace battery.
2.  Computer’s issues. Please restart computer.
3.  Use the mouse within 1 O meters as its maximum operating distance is 1 O meters. And make sure there is no metal obstacle between mouse and its USS receiver.

If your problems still can’t get solved via above solutions. please contact our customer service for help. (After-sales service emall:Bresll- [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>