ATMOTUBE 2AHGD-ATMO-PR1 Portable Air Pollution Monitor User Guide
- June 1, 2024
- Atmotube
Table of Contents
2AHGD-ATMO-PR1 Portable
Air Pollution Monitor
User Guide
Portable
Air Pollution Monitor
GET TO KNOW YOUR ATMOTUBE PRO
Atmotube PRO was created to raise awareness about both indoor and outdoor air
quality, so you can make the right choices every day and live a healthier
life.
SETTING UP
Charge your device
Make sure your device is fully charged. To charge Atmotube, connect it to a
power supply for at least 2 hours using the USB Type-C cable from the box. The
LED light will change its color from orange to green once the Atmotube is
fully charged.
AQS INDICATOR
The LED light color represents the current Air Quality Score, from Red
(severely polluted) to Blue (clean). When you press the button, the LED lights
up to show the current AQS level.
FIRST POWER ON
You can turn the Atmotube on by connecting Atmotube to a 5V power source via a
USB cable. After the device has been switched on for the first time or after
prolonged inactivity, the VOC sensor requires approximately three minutes to
preheat. While in preheating mode, the LED will blink orange; during this
period, the device will be unresponsive and will not take any measurements.
PAIRING/UNPAIRING THE ATMOTUBE
Please, follow in-app instructions to pair the Atmotube with your smartphone.
MEASUREMENTS
Atmotube starts measuring air quality immediately after the switch, but the
measurements become more accurate after the first 12 hours of use after proper
calibration.
Atmotube PRO takes readings every few seconds while ON. In order to extend
your Atmotube battery life you can select one of the few interval modes for PM
sensor readings in Settings Mode.
Apart from the selected intervals for PM sensor readings, pressing the button
on Atmotube or opening your mobile app will automatically start the PM sensor
measurements.
AUTOMATIC RE-CALIBRATION
Atmotube PRO automatically re-calibrates itself, ensuring measurement accuracy over time.
ATMOTUBE PRO AT A GLANCE
-
Real-time detection:
– PM1/PM2.5/PM10 particles
– Volatile Organic Compounds
– Atmospheric pressure
– Temperature and relative humidity -
2000 mAh Li-ion
-
Bluetooth 5.0 LE
-
USB Type-C
DIMENSIONS: 86 Х 50 X 22 MM (3.4 X 2 X 0.9 INCHES)
WEIGHT: 104 GRAMS (3.66 OZ)
Itʼs free on the App Store and
Google Play store.
REGULATORY INFO
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the users authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
USAGE AND STORAGE REGULATIONS
-
Product can be used at a temperatures between -5°C and 45°C (23°F and 113°F). Avoid any extreme temperature changes. Recommended conditions for accurate readings are: 0°C to 30°C at less than 85% RH.
-
Product can be stored at temperatures between -40°C and 85°C (-40°F and 185°F) and less than 85% humidity.
-
Avoid any prolonged exposure to chemical products and dust – they may damage the Atmotube sensors. In particular avoid exposure to:
– Silicone vapours from sources such as silicone adhesives, silica gel, silicone rubber, silicone sealant, silicone gel, HMDS, oils including hair gels and oils.
– Corrosive gases and vapours such as chlorine, hydrochloric acid, Sulphur oxides for example some flux vapours
– Acids, solvents and other liquids, including water, especially where the water contains ionic contamination such as salts
– Particulates and dust -
Avoid any kind of shocks, be they physical, thermal or otherwise. They may damage internal and external components of your Atmotube
-
Atmotube is not a water-resistant device; keep the Atmotube away from water or any moisture
-
Keep your Atmotube and its accessories out of reach from children, as it contains small parts and may present a choking hazard.
WARRANTY
Atmotube Limited Warranty — the Limited Warranty extends only to the first
consumer purchase of the product and is not transferable.
The warranty covers:
With the subject to the exclusions contained below, company warrants the
Atmotube and in-box accessories, accompanying the Product against defects in
workmanship and material, under the normal consumer use.
The warranty does not extend to:
– Natural wear/tear (scratches, alteration of the color and/or the materials
of the Atmotube, peeling of the Atmotube color plating)
– Any damage to the Device/its parts resulting from accident, misuse, liquid
contact, fire, earthquake or any other external caused, abnormal or abusive
use, negligence or lack of care, or accidental damage (such as dents).
– Indirect damages of any kind.
COMPATIBLE DEVICES
iPhone 6S with iOS 14.1 or higher.
iPad 5th generation with iOS 14.1 and higher.
Android OS 5.0 and higher with
Bluetooth 4.0 low energy (BLE) support.
RF INFORMATION
TX Frequency:
Bluetooth: 2402-2480 MHz
RX Frequency:
Bluetooth: 2402-2480 MHz
Maximum Output Power:
Bluetooth: +4 dBm
SAFETY INSTRUCTIONS
Atmotube PRO is not a medical device. It is not a professional air quality
monitoring device; it provides estimates intended for personal use and
informational purposes only. The Atmotube PRO is a subject to certain
limitations and must be used in accordance with specifications and quick
start guide. Users should review the information contained in quick start
guide and available at atmotube.com, to learn more.
All the screenshots/drawings in this quick start guide are provided for
explanatory purposes only. Device manufacturer has a right to update
application UI/device functionality without any prior notice.
IMPORTANT! Do not try to modify or repair the Atmotube PRO. All
procedures, related to Service and Maintenance should be performed by
professional technicians.
FCC ID: 2AHGD-ATMO-PR1
This device complies with R&TTE Directive.
A copy of the EU Declaration of Conformity and Regulatory Information is
available online at atmotube.com/regulatory or in the Atmotube app (Settings
Regulatory)
© Atmotech. All rights reserved.
Representative office address: 100 Pine St. Suite 1250 San Francisco, CA 94111
- Do not dispose your product with household waste.
- Disposal of the packaging and your product should be done in accordance with local regulations.
The symbol on the product or its packaging signifies that this product must be
disposed of separately from ordinary household wastes at its end of life.
Please kindly be aware that it is your responsibility to dispose of electronic
equipment at recycling centers to help conserve natural resources.
Each country should have its collection centers for electrical/electronic
equipment recycling. For detailed information about your recycling drop off
point, contact the retailer where you bought the product or your local
recycling authority.