DuMterr W342 Foldable 3 in 1 Wireless Charger User Manual

June 13, 2024
DuMterr

DuMterr-LOGO

DuMterr W342 Foldable 3 in 1 Wireless Charger

DuMterr-W342-Foldable-3-in-1-Wireless-Charger-PRODUCT

Product Introduction

DuMterr-W342-Foldable-3-in-1-Wireless-Charger-FIG-1

Compatible devices

Smartphone
For iPhone: iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 mini, iPhone 12, iPhone 12 mini, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 11, iPhone 11 Pro, iPhone 11Pro Max, iPhone XS, iPhone XS Max, iPhone XR, iPhone XR Max, iPhone 8, iPhone 8 Plus For Samsung Galaxy: $23 Ultra, $22 Ultra, S22+, S22, S21, $21 Ultra, S20 5G, $20 Ultra 5G S10, S10e, S10 5G, S10+S9, S9+$8, S8+, S8 ActiveS7, S7 Edge, S7 Active, S6, S6 Edge+, S6 Active, Samsung Note 20, 20Ultra 5G, Note10, 10+, 10e, Note 9, Note 8, Note 7, Note 6, Note 5 For Google: Pixel 7, Pixel 7 Pro, Pixel 6 Pro, Pixel 6, Pixel 5

Earbuds
For Apple earbuds: AirPods 2, 3, AirPods Pro 1, 2
(Note: AirPods 2/3 has 2 versions, not for AirPods 2/3 which do not support wireless charging)

Smartwatch
For Apple watches: iWatch 8, Ultra, 7, SE, 6, 5, 4, 3, 2

Product specifications

  • Model: W342
  • Output for iWatch: 2.5W
  • Output for earbuds: 3W
  • Output for phone : 15W/10W/7.5W/5W
  • Brand: DUMTERR
  • Input: 5V=3A 9V-2A

How to use the product

  1. Put the phone into the correct wireless charging area, you can see the charging indicator blue light breathing slowly flashing, indicating that the phone is charging normally, The blue light is always on when fully charged, and the blue and green lights flash alternately if the charging is not normal.(Standby state: The green light is always on when 9V is input, and the green light is flashing when 5V is input, only the mobile phone module.
  2. To charge the watch, place the watch in the wireless charging area of the watch and align it with the magnet, the charging indication on the watch display will light up, indicating that the watch is charging.
  3. Bluetooth earbuds charging: place the Bluetooth earbuds flat on the wireless charging area.
    (Note: Please do not wear the 3mm silicone protective cover. Otherwise, it may lead to poor contact and cannot be charged).

Precautions

  1. During charging, there is no metal of the back of the phone.
  2. The charging distance is 2-6mm, please do not wear a protective case that is thicker than 3mm.
  3. The lower the temperature, the faster the charging speed. Faster charging in winter than in summer.
  4. Do not use or place the product under high temperature, or expose the product to direct sunlight.
  5. Do not immerse the product in water or near fire.
  6. Charging will be interrupted when the functional temperature exceeds 104°F to avoid damage to the phone/watch/earbud battery

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the device and receiver.
  • Connect the device into an outlet on a circuit different from that to which the receiver is a device.
  • Consult the dealer or an experienced radio/ TV technician for help.

After-sales Services

If there is any issue with the item, please contact us through the Amazon Message Center or through the E-mail: dumter@163.com In order to solve the problem faster for you, please prepare the following information: the issue of charger, phone model, the type of adapter and phone case you are using, and if possible you can attach a picture or video of the problem. Thank you.

FCC
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

IC Warning Message: – English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals