innocn 34Q1R 4K Monitor Installation Guide

June 13, 2024
INNOCN

innocn - logo . 34Q1R 4K Monitor
Installation Guideinnocn 34Q1R 4K Monitor

Before using this product, please read this User Manual carefully and keep it well

Precautions

  1. Keep the monitor away from water sources or damp places, such as bath rooms, kitchens, basements and swimming pools.
  2. Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause human injury or device damage.
  3.  Store and use the monitor in a cool, dry and well ventilated place, and keep it away from emission and heat sources.
  4. Do not cover or block the vent hole in the rear casing, and do not use the product on a bed, sofa, blanket or similar objects.
  5. The range of the supply voltage of the monitor is printed on the label on the rear casing. If it is impossible to determine the supply voltage, please consult the distributor or local power company.
  6. If the monitor will not be used for a long period, please cut off the power supply to avoid electric shock in rainy days and damage due to abnormal supply voltage.
  7. Please use a reliable grounded socket, Do not overload the socket, or it may cause fire or electric shock.
  8. Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or electric shock.
  9. Do not disassemble or repair this product by self to avoid electric shock. If faults occur, please contact the after-sales service directly.
  10. Do not pull or twist the power cable forcedly.
  11. There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel it off, or the product may be damaged and the warranty will be invalid.

Installation of base

innocn 34Q1R 4K Monitor - parts

Wall-mounted Installationinnocn 34Q1R 4K Monitor - Wall-mounted
Installation Adjustment of monitorinnocn 34Q1R
4K Monitor - Adjustment of monito

Cable connection

  • The bottom interface configuration at the back of the monitor varies with products.
  • Note: If the power cable or signal cable is damaged, you must replace it with special soft cables or special components purchased from the manufacture or maintenance department.

innocn 34Q1R 4K Monitor - Cable connection Language Selection
When booting for the first time, you need to set the default language of the monitor menu. Press buttons ( ) to select the language to be set, and press the OK button to confirm.
Description of buttonsinnocn 34Q1R 4K Monitor - Description of
buttons

Button1 Function
1 Press control pad to turn the display on/off.
2 Control pad left : Exit / quickly switch input signals of the port.
3 Control pad down : quickly adjust the volume / select menu.
4 Control pad right : Main Menu / Ok.
5 Control pad up : quickly adjust the brightness / Select menu.

Explanation of indicator lightinnocn 34Q1R 4K Monitor - Description of
buttons 1 108.007.XXXXX  34E9R 34Q1R 20230808

www.innocn.com http://weixin.qq.com/r/PjkZAULEvh- BrQZi92ws
Home Page: www.innocn.com
Contact Us
Global Customer Service: service@innocn.com
Japan Customer Service: service-japan@innocn.com

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
HDMI, HDMI IDMI Licensing Administrator, Inc.
HDM, High-Definition Multimedia Interface HDMI Licensing Administrator, Inc.
**** This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2.  this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)

innocn - logo .Pour en savoir plus:
www.quefairedemesdechets.fr

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals