SUNSTONE SCC22PTD 37 Appliance Cabinet for Hybrid Pellet Grills User Guide
- June 13, 2024
- SUNSTONE
Table of Contents
Product Dimensions
Product Components
- Reconfigure similar components as you wish into multiple configurations
Quick Setup Guide
These Steps are Required to be Completed before connecting cabinet to any adjacent cabinet within your island package.
- Fasten on the included (4) Peg- Legs for the SCC22PTD & SCC15PTD Drawer Bases. Lift and Hinge the cabinets together, then secure with connecting bolts. Fasten on both Handles.
- Hinge the (2) SCC22BPE cabinet panels to the back connecting (2) SCC22PTD Drawer Bases.
- Connect each Left and Right Side Arm SCC16LARM & SCC16RARM.
- Fasten on each Left and Right Side Trim-Kits. Trim- Kits must be installed before cabinet is connected to other opposing cabinets on either side.
SUNSTONE METAL PRODUCTS
16004 CENTRAL COMMERCE DR.
PFLUGERVILLE, TEXAS 78660
Tel: 888.934.9449
Bus: 512.487.5116
Fax: 512.487.7016
PRODUCT
37” Appliance Cabinet for Hybrid Pellet Grills
Item No. SAC37HGDC
DESCRIPTION
37” Appliance Cabinet
- Lifetime Structure Warranty
- 304 Stainless Steel Structure
- 304 SS Rod Handles
- Front & Back Kick-Plates
- Easy Pin-Lock Installation
- Soft-Close Drawer Tracks
- Covered Access Ports
- Adjustable Peg-Legs
- Optional Wheel Casters
INCLUDED COMPONENTS
- (1) SCC22PTD
- (1) SCC22BPE
- (1) SCC15PTD
- (1) SCC15BPE
- (1) SCC16RARM
- (1) SCC16LARM
- (2) Front Vented Kick Plate
- (2) Back Solid Kick Plate
- (8) Adjustable Peg Legs
- (2) 304 SS Rod Handles
RODUCT DIMENSIONS
37″W x 28‐1/4″D (w/Doors) x 34‐
1/2″H (w/Legs) or 30‐1/2″H (no
Legs) or Upto 36″ Max Adjustable
INSERTABLE PRODUCTS
(See next page Trim Kit Guide for other insertable product Brands)
MATERIAL SPECS
304 Stainless Steel entire structure, 18 Gauge for Door Panel , 18 Gauge for
Cabinet Box, 18 Gauge for Shelf, Handles are made of Solid 304 Stainless Steel
Bar.
SAC37HGDC TRIM-KIT GUIDE
Disclaimer: The trademarks used in the “Product Option” column below belong to their respective owners who do not sponsor nor are they affiliated with Sunstone Metal Products, L.L.C. The specific product Cut‐ ut Dimensions have not been directly confirmed by any Sunstone Metal Products LLC, representative or employee. Use own discretion to confirm exact product fit.
| Model Number | Sleeve Cut-Out | Product Option |
|---|---|---|
| SCCHGCTK3 | 30″ Width x 16-1/4″ Height |
wo/Rail x 24-1/2″
Maximum Depth| o Known Models
SCCHGCTK4.75| 27-5/8″ Width x 16-1/4″
Height x 24-1/2″ Maximum
Depth| Memphis® 28″ Pellet Grill, Coyote® 28″
Pellet Grill
SCCHGCTK6.25| 24-7/8″ Width x 16-1/4″ Height
w/Rail or 12-3/4″ Height wo/Rail x
24-1/2″ Maximum Depth| No Known Models
- Attach ach Trim Kit Panel to each side
- Attach Counter ail Top Pane
CALL OUR TECH. SUPPORT 888-934-9449
Trim-Kit Sleeve
Dimensions
Compatible between 24‐7/8 In. Width and 30 In. Width x 16‐1/4 In. Height x 24‐
1/2 In. Depth Max Height with counter at 3/4 In. Height (Additional Height can
be adjusted by Removing Bottom Filler Rail or by adding a Thicker Counter or
Backer Board) 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>