Sunstone Metal Products SCC22BPE Appliance Cabinet for Hybrid Pellet Grills User Guide
- June 13, 2024
- SUNSTONE METAL PRODUCTS
Table of Contents
SCC22BPE Appliance Cabinet for Hybrid Pellet Grills
User Guide
Product Dimensions
![Sunstone Metal Products SCC22BPE Appliance Cabinet for Hybrid Pellet Grills
- ProductDimensions](https://manuals.plus/wp-content/uploads/2023/09/Sunstone- Metal-Products-SCC22BPE-Appliance-Cabinet-for-Hybrid-Pellet-Grills- ProductDimensions.jpg)
Product Components
![Sunstone Metal Products SCC22BPE Appliance Cabinet for Hybrid Pellet Grills
-
Product Components](https://manuals.plus/wp-content/uploads/2023/09 /Sunstone-Metal-Products-SCC22BPE-Appliance-Cabinet-for-Hybrid-Pellet-Grills- Product-Components.jpg)* Reconfigure similar components as you wish into multiple configurations
Quick Setup Guide – These Steps are Required to be Completed before connecting cabinet to any adjacent cabinet within your island package.- Fasten on the included (4) Peg- Legs for each of the SCC22PTD Drawer Bases. Lift and Hinge the cabinets together, then secure with connecting bolts. Fasten on both Handles.
- Hinge the (2) SCC22BPE cabinet panels to the back connecting (2) SCC22PTD Drawer Bases.
- Connect each Left and Right Side Arm SCC16LARM & SCC16RARM.
- Fasten on each Left and Right Side Trim-Kits. Trim- Kits must be installed before cabinet is connected to other opposing cabinets on either side.
SUNSTONE METAL PRODUCTS
16004 CENTRAL COMMERCE DR.
PFLUGERVILLE, TEXAS 78660
Tel: 888.934.9449
Bus: 512.487.5116
Fax: 512.487.7016
PRODUCT
66” Appliance Cabinet
for Hybrid Pellet Grills
Item No. SAC44HGDC
DESCRIPTION
- 66” Appliance Cabinet
- Lifetime Structure Warranty
- 304 Stainless Steel Structure
- 304 SS Rod Handles
- Front & Back Kick-Plates
- Easy Pin-Lock Installation
- Soft-Close Drawer Tracks
- Covered Access Ports
- Adjustable Peg-Legs
- Optional Wheel Casters
INCLUDED COMPONENTS
- (3) SCC22PTD
- (3) SCC22BPE
- (1) SCC16RARM
- (1) SCC16LARM
- (3) Front Vented Kick Plate
- (3) Back Solid Kick Plate
- (12) Adjustable Peg Legs
- (3) 304 SS Rod Handles
PRODUCT DIMENSIONS
66″W x 28‐1/4″D (w/Drawers) x 34‐1/2″H (w/Legs) or 30‐1/2″H (no Legs) or Upto 36″ Max Adjustable Height
INSERTABLE PRODUCTS
(See next page Trim Kit Guide for other insertable product Brands)
MATERIAL SPECS
304 Stainless Steel entire structure, 18 Gauge for Door Panel , 18 Gauge for
Cabinet
Box, 18 Gauge for Shelf, Handles are made of Solid 304 Stainless Steel Bar.
SAC66HGDC TRIM-KIT GUIDE
Disclaimer: The trademarks used in the “Product Option” column below belong to their respective owners who do not sponsor nor are they affiliated with Sunstone Metal Products, L.L.C. The specific product Cut‐ ut Dimensions have not been directly confirmed by any Sunstone Metal Products LLC, representative or employee. Use own discretion to confirm exact product fit.
Model Number | Sleeve Cut-Out | Product Option |
---|---|---|
SCCHGCTK3 | 60-1/2″ Width x 16-1/4″ |
Height wo/Rail x 24-1/2″
Maximum Depth| No Known Models
SCCHGCTK4.75| 57″ Width x 16-1/4″ Height x
24-1/2″ Maximum Depth| No Known Models
SCCHGCTK6.25| 54-3/8″ Width x 16-1/4″ Height
w/Rail or 12-3/4″ Height wo/Rail x
24-1/2″ Maximum Depth| AMG® 54″ Hybrid Grill
- Attach each Trim Kit Panel to each side
- Attach Counter Rail Top Panel
CALL OUR TECH. SUPPORT888-934-9449
![Sunstone Metal Products SCC22BPE Appliance Cabinet for Hybrid Pellet Grills
- fig 5](https://manuals.plus/wp-content/uploads/2023/09/Sunstone-Metal- Products-SCC22BPE-Appliance-Cabinet-for-Hybrid-Pellet-Grills-fig-5.jpg)
Trim-Kit Sleeve Dimensions
Compatible between 54‐3/8 In. Width and 60‐1/2 In. Width x 16‐1/4 In. Height x 24‐1/2 In. Depth Max Height with counter at 3/4 In. Height (Additional Height can be adjusted by Removing Bottom Filler Rail or by adding a Thicker Counter or Backer Board)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>