SUNSTONE DE-MD30 Designer Series Raised Style Single Drawer Instruction Manual
- June 12, 2024
- SUNSTONE
Table of Contents
SUNSTONE DE-MD30 Designer Series Raised Style Single Drawer
Product Information
| Product Name | 30 Wide x 10 Height Single Drawer |
|---|---|
| Item No. | DE-MD30 |
| Description | Designer Series, Raised Style – 30 Wide x 10 Height Single |
Drawer w/Divider & Peg-Legs
Product Dimensions (Product Size)| 30 Width x 10 Height x 23 Depth
Cut-Out Dimensions| 28-1/2 Width x 8 Height x 22 Depth
Specifications| Frame: 16 gauge 304 SS
Panel’s: 18 gauge 304 SS
Inside Drawer Box: 20 gauge 201 SS
Handle: Solid 304 SS
Product Features| – Removable drawer horizontal divider
– DE-SD30 on top
– Rod handle
– Combine multiple components to create unlimited
combinations
– DE-MD30 in middle
– Component features a 1/16 raised frame visible edge enabling you
to place two or more components side by side or on top of one
another creating one single larger functioning component of your
own choosing
– 10 frame height
– Soft-closing drawer track
Warranty| Refer to the SUNSTONE manufacturing website for warranty details
Product Usage Instructions
-
1. Insert the component DE-MD30 at the bottom. - Stack multiple components on top of one another.
Important: Rod handles are mounted to the inside of each panel. You must unscrew each one and mount them on the outside of the drawer or door panel.
- Remove drawers as needed.
- Mount the drawer and lower legs.
- Ensure the island wall cut-out size is 28-1/2 width by 8 height by 22 depth.
- Insert the drawer.
- Have 22 clearance inside depth.
- Screw the peg leg down to the floor base or stacked blocks using a wrench. Use a leveler to confirm elevation.
- Secure screws in place through holes using a drill. (Screws not included)
For additional product support and tutorials, please visit the SUNSTONE manufacturer website: www.sunstonemetalproducts.com.
Product Dimensions
Product Features
IMPORTANT!! – ROD HANDLES ARE MOUNTED TO THE INSIDE OF EACH PANEL, YOU
MUST UNSCREW EACH ONE AND MOUNT IT ON THE OUTSIDE OF THE DRAWER OR DOOR PANEL.
See the SUNSTONE manufacturing website for additional product support and
product tutorials:
www.sunstonemetalproducts.com.
Product Installation
ISLAND WALL CUT-OUT SIZE IS 28-1/2″ WIDTH BY 8″ HEIGHT BY 22″ DEPTH
- INSERT COMPONENT
- REMOVE DRAWERS
- MOUNT DRAWER AND LOWER LEGS
REMOVE DRAWERS
REMOVE DRAWERS IN ORDER TO MOUNT BOX
- Pull the drawer fully open so Levers are visible.
- Push “DOWN” on the right lever, and “UP” on the left lever.
- Holding levers in place, pull the drawer toward you.
PRODUCT
- 30″ Wide x 10″ Height
- Single Drawer
- Item No. DE-MD30
DESCRIPTION
- Designer Series, Raised Style – 30″
- Wide x 10″ Height Single Drawer
- w/Divider & Peg-Legs
PRODUCT DIMENSIONS
- 30″ WIDTH x10″ HEIGHT x23″
- DEPTH (PRODUCT SIZE) 28-1/2″
- WIDTH x8″ HEIGHT x22″ DEPTH (CUT-OUT)
SPECIFICATIONS
The frame is made from 16 gauge 304 SS, and the panels are made from 18 gauge 304 SS. The Inside Drawer Box is made with 20 gauge 201 SS. The handle is Solid 304 SS.
WARRANTY
- EXTERIOR FINISH —————–3 YEARS
- ROD HANDLES———————3 YEARS
- DRAWER TRACK—————— 1 YEAR
- PEG-LEGS————————— 1 YEAR