fastrack FT3 Reflex Tunes Truly Wireless Earbuds User Manual

: June 13, 2024
: fastrack

Table of Contents

Fastrack FT3 Reflex Tunes Truly Wireless Earbuds
Product Information
Product Usage Instructions
Touch Method:
Product parameters
FCC Warning
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Fastrack FT3 Reflex Tunes Truly Wireless Earbuds

Product Information

The Wireless Earphones are a portable audio device that allows users to listen to music and make phone calls wirelessly. The earphones come with a charging box that can be used to charge the earphones on the go. The product has the following specifications and parameters:

Wireless version: V5.3
Working range: barrier-free 10 meters
Wireless frequency: 2.402-2.480GHz
Charge and discharge cycle: 300 times
Charging box capacity: 800mAh
Charging voltage: DC5V-800mA
Charging time: 1.5 hours
Talk time: about 3.2 hours (80% volume)
Play music: about 4 hours (80% volume)
Headphone built-in battery: lithium battery 3.7V, 70mAh

Please note that the specifications and parameters may vary in different environments. The product is constantly being upgraded and improved, so the specific functions and product pictures may b slightly different from the actual product. Please refer to the actual product for accurate information.

Product Usage Instructions

Touch Method:

The user manual does not provide specific touch methods. Please
refer to the product’s user interface or contact customer support
for instructions on how to operate the earphones using touch
controls.

Charging Box LED Indicator Status:

The user manual does not provide information about the LED
indicator status of the charging box. Please refer to the product’s
user interface or contact customer support for instructions on how
to interpret the LED indicators.

Universal Wireless Connection Operation

Ensure that the wireless headset and your mobile phone (or other connected devices) are in close proximity.
Follow the pairing instructions provided by the earphones to establish a wireless connection between the earphones and your mobile phone or other devices.

Considerations When Connecting Wirelessly The user manual does not provide specific considerations when connecting wirelessly. Please follow the general guidelines below:

Make sure that Bluetooth is enabled on your mobile phone or other connected devices.
Ensure that the wireless headset is properly charged before attempting to connect.
Keep the wireless headset and your mobile phone (or other connected devices) within the recommended working range of 10 meters.

Precautions:

Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate
this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Product parameters

Wireless version: V5.3
Working range: barrier-free 10 meters
Wireless frequency: 2.402-2.480GHz
Charge and discharge cycle: ≥300 times
Charging box capacity: 800mAh
Charging voltage: DC5V-800mA
Charging time: 1.5 hours
Talk time: about 3.2 hours (80% volume)
Play music: about 4 hours (80% volume)
Headphone built-in battery: lithium battery 3.7V, 70mAh

Note: The speciﬁcations and parameters of this product are all laboratory test data, which will be diﬀerent in diﬀerent environments; the product is constantly being upgraded and improved, and the speciﬁc functions and product pictures may be slightly diﬀerent from the actual product, please refer to the actual product.

Touch method

Power on: open the cover and turn on
Power oﬀ: Put the earphone into the charging box, and close the charging box cover to turn oﬀ
Play/Pause: Click once on the left/right earphones
Previous song: Three clicks on the left earphone
Next song: Three clicks on the right earphone
Voice Assistant: Press and hold the left/right earphones for 2 seconds
Answer a call: Click once on the left/right earphones
Hang up the phone: Double-click on the left/right earphone
Refuse to answer a call: Press and hold the left/right earphones for 2 seconds
Increase volume: Double-click on the right earphone
Reduce volume: Double-click on the left earphone

Charging box LED indicator status

Open/close lid indicator light: green light on
When the charging box charges the earphones: the indicator light is on for 8 seconds and then oﬀ until the earphones are fully charged.
Charging indicator light for the charging box: The orange light ﬂashes, and remains on for a long time when fully charged
Charging box low battery reminder: LED ﬂashing

Universal wireless connection operation

Please put the wireless headset and mobile phone (or other connected devices) together;
Make sure the headset is powered on, open the charging box cover or remove the headset from the charging box, make sure that the left and right headsets are connected, the headset can enter the pairing mode;
Turn on the Wireless function of the user’s mobile phone (or other Wireless device), and search or scan. At this time, the mobile phone will search for all nearby Wireless devices. Click the corresponding Wireless model name to connect. After successfully pairing and connecting, you can make a headset call , Listening to songs, etc.

Considerations when connecting wirelessly

Please control the distance between the wireless headset and the mobile phone (or other connected equipment) within 1 meter, the closer the better;
You can put the earphones in the charging box and open the charging box cover to connect;
When the headphones are removed from the charging box and connected, make sure that the left and right headphones are connected;
Do not close the charging box cover during the connection process;
The charging box needs to have enough power. If the headphones cannot be turned on when the cover is opened, put the headphones in the charging box, close the cover of the charging box and plug in the charger to charge for at least one hour;

Precautions

Never use corrosive cleaning agents to clean this product;
Do not allow this product to heat or come close to ﬁre sources, such as cooking stoves;
Do not expose this product to direct sunlight for a long time to avoid high temperature;
Do not dispose of this product in ﬁre to avoid explosion;
Do not try to disassemble this product to make any modiﬁcations, because it does not contain any maintenance components;
Do not use this product in the rain;
If you do not plan to use this product for a long period of time, please store it in a dry environment.And charge the headset at least once a month to extend the life and avoid extreme temperatures and dust.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference,
this device must accept any interference r eceived, including interference that may cause undesired operation. nThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.