WO43 Table Lamp Solight Instruction Manual

WO43 Table Lamp Solight

Product Information

adjustment of light intensity and temperature.
Charging Adapter| An adapter used to charge the table lamp.
Instructions for Use| A detailed guide on how to operate and use the table lamp.

Specifications

Product Usage Instructions

To use the Solight WO43 Table Lamp, please follow these steps:

1. Connect the input connector of the power source to the input port of the table lamp.

2. Connect the charging adapter to an electrical socket.

3. Switch the lamp on by pressing the ON/OFF button with your finger.

4. Adjust the light intensity using the UP and DOWN buttons.

5. Change the temperature of the light by using the M button.
   There are 3 preset intensity levels:

   • Warm white light
   • Cold white light
   • Natural light

Battery Installation

1. Open the battery compartment.
2. Remove any insulation present.
3. Insert a CR2032 button battery.

Date and Time Setup

(Instructions for setting up the date and time are not provided in the given text extract.)

Alarm Setup

(Instructions for setting up the alarm are not provided in the given text extract.)

Thermometer Setup

(Instructions for setting up the thermometer are not provided in the given text extract.)

Important Notes

The light source of this luminaire is non-replaceable. At the end of its service life, the entire luminaire must be replaced and disposed of in a designated place. The product contains a light source that cannot be removed for verification. Therefore, the entire product is considered a light source. If the power cord is damaged, it cannot be replaced, and the unit must no longer be used.

Dear customer,
Thank you for buying our product. Carefully read through the following instructions and stick to them so that the product serves you safely and to your full satisfaction. That way it will not be used incorrectly and it won’t get damaged. Prevent untrained handling of the device and always adhere to the principles of use of electrical appliances. Carefully store the instructions for use. Intended for use in the home or inside a room. Never expose to an environment with a high humidity (for example a bathroom), and prevent the product from coming into contact with liquid.

Contents of package

Table lamp with LCD display, charging adapter, and instructions for use. If any of the components are missing contact your salesperson.

Specifications

• Input DC5V/1A
• Luminosity 300lm
• Dimensions 145 x 145 x 330mm
• Power 7W

Use

1. Connect the input connector of the power source to the input port of the table lamp. Then connect the charging adapter to the electrical socket.
2. Switch the lamp on by pressing the ON/OFF button with your finger. The light intensity can be adjusted using the UP and DOWN buttons. You can change the temperature of the light by using the M button. There are 3 preset intensity levels: 1. Warm white light, 2. Cold white light, and 3. Natural light.
3. When setting the angle of light always hold the body of the lamp. The arm of the lamp can be moved at an angle of 180°. Excess bending of the hinge can lead to damage being caused.
4. The body of the lamp can move at an angle of 90°; when setting up the desired angle always hold the base of the lamp.

Battery installation

Setup of date and time

In the time display mode (TIME icon) press the SET button on the rear side of the lamp. That gets you into date and time setup mode. The order of setup is as follows: hours-minutesyears-months-days-save and return to time display mode. By pressing the SET button you move between individual settings. By using the Up and Down buttons you can set up the desired values. In order to save the settings press the Mode button or don’t press any buttons for one minute. By pressing the Up button you switch between 12h mode and 24h mode of time display.

Alarm setup

In the time display mode press the Mode button. That gets you into alarm time display mode (ALARM icon). By pressing the SET button you get into alarm setup mode. The order of settings is as follows: hours-minutes-snooze ringing- melody-save and return to alarm time display mode. By pressing the SET button you move between individual settings. By using the Up and Down buttons you set up the desired time and melody. In alarm time display mode the Up and Down buttons are used to switch on and switch off the alarm function (Zz icon) and to postpone ringing. The alarm always runs for one minute and then the ringing gets postponed to the set value. By pressing the Set button or any other button you can switch the alarm off for 24 hours.

Setup of thermometer

• By pressing the Down button you can switch between °C and °F.
• Note: The values displayed by the display of the lamp are indicative and may show deviations compared to dedicated and calibrated instruments (thermometers, clocks, etc.).
• These deviations, if any, are within ±1.8°C for a thermometer and approximately ±5 min/month for a clock. Deviations within these values are not grounds for complaint.
• The light source of this luminaire is non-replaceable, at the end of its service life the entire luminaire must be replaced and disposed of in a designated place. This product contains a light source that for design reasons cannot be removed for verification and therefore the entire product is considered a light source. The power cord cannot be replaced if damaged, the unit must no longer be used.

Manufacturer: Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, Czech Republic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>