SOLIGHT CZWPH-150W-007 LED High Bay Instruction Manual

June 13, 2024
Solight

SOLIGHT CZWPH-150W-007 LED High Bay

Dear customer, thank you for purchasing our product. Please read the following instructions carefully and follow them to serve you safely and to your full satisfaction. This will prevent misuse or damage. Avoid unprofessional handling of this appliance and always observe the electrical appliance usage guidelines. Keep the instruction manual carefully. Installation may only be carried out by a qualified worker qualified in accordance with Decree No. 50/1978 Coll., as amended, at least a worker who is knowledgeable in accordance with Section 5 of Decree No. 50/1978 Coll., as amended.

TECHNICAL PARAMETERS

Model WPH-150W-007
Input voltage AC220~240V
Frequency 50/60 Hz
Rated power 150 W
Material Aluminium
Luminosity 140 lm/W
Operating temperature -30°C ~ +50°C
Chromaticity 5000K
Dimensions of the luminaire ⌀ 290 × 167.78 mm
Beam angle 120°
IP protection IP65
Colour rendering 80Ra

Package includes

  • 1 pc LED High Bay luminaire
  • 1 pc Instructions
  • 1pc Installation ring

WARNING

  1. Read the operating instructions carefully before installation.
  2. Only have a qualified person in the field or a professional technician install the luminaire.
  3. Before installation, check that the local voltage range matches the luminaire’s operating voltage.
  4. If the luminaire is damaged, it should be replaced by the supplier, a service representative or a qualified person.
  5. Protect the luminaire from fire, overvoltage and vibration.
  6. Take extra care to avoid fire or electric shock.

INSTALLATION

SOLIGHT-CZWPH-150W-007-LED-High-Bay-fig-1

  1. Drill a hole in the ceiling and install the hook.
  2. Hang the light fixture.
  3. Connect the cables. Brown – L, Blue – N, Yellow/Green – ground. Ensure waterproof processing.

DIMENSIONS

SOLIGHT-CZWPH-150W-007-LED-High-Bay-fig-2

WIRING DIAGRAM

SOLIGHT-CZWPH-150W-007-LED-High-Bay-fig-3

The light source of this luminaire is non-replaceable, at the end of its service life the entire luminaire must be replaced and disposed of in a designated place. This product contains a light source that for design reasons cannot be removed for verification and therefore the entire product is considered a light source. The power cord cannot be replaced if damaged, the unit must no longer be used. The product has been issued with a CE declaration of conformity in accordance with the applicable regulations. On request from the manufacturer: info@solight.cz, or downloadable from www.solight.cz

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals